| № | Name | A* | Part number | A |
|---|---|---|---|---|
| 100 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 460 MM |
1 | A 39 541 071 02 | - |
| 115 | DRIVE FLANGE Replaced by: A 395 411 10 11 |
- | A 39 541 109 11 | - |
| 115 | DRIVE FLANGE Replaced by: A 395 411 12 11 |
- | A 39 541 110 11 | - |
| 115 | DRIVE FLANGE STAGGERED TEETH |
2 | A 39 541 112 11 | - |
| 118 | UNIVERSAL JOINT CROSS Replaced by: A 940 410 00 31 |
- | A 62 041 000 31 | - |
| 118 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 94 041 000 31 | - |
| 121 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 124 | LOCK AS REQUIRED 2.00 MM |
8 | A 00 699 431 41 | - |
| 124 | LOCK AS REQUIRED 2.10 MM |
8 | A 00 699 435 41 | - |
| 124 | LOCK AS REQUIRED 2.20 MM |
8 | A 00 699 439 41 | - |
| 130 | GREASE NIPPLE PROTECTIVE TUBE |
1 | N 071412 010100 | - |
| 200 | PROPELLER SHAFT Replaced by: A 973 410 02 02 |
- | A 65 041 001 02 | - |
| 200 | PROPELLER SHAFT FROM TRANSFER CASE TO FRONT AXLE 1400 MM |
1 | A 97 341 002 02 | - |
| 215 | DRIVE FLANGE Replaced by: A 650 411 04 11 |
- | A 65 041 101 11 | - |
| 215 | DRIVE FLANGE STAGGERED TEETH |
2 | A 65 041 104 11 | - |
| 218 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 38 141 002 31 | - |
| 218 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 97 341 000 31 | - |
| 221 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 224 | LOCK AS REQUIRED 1.65 MM |
8 | A 00 699 406 41 | - |
| 224 | LOCK AS REQUIRED 1.70 MM |
8 | A 00 699 408 41 | - |
| 224 | LOCK AS REQUIRED 1.80 MM |
8 | A 00 699 412 41 | - |
| 224 | LOCK AS REQUIRED 1.85 MM |
8 | A 00 699 414 41 | - |
| 230 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - |
| 230 | GREASE NIPPLE PROTECTIVE TUBE |
1 | N 071412 008102 | - |
| 504 | PROPELLER SHAFT Replaced by: A 656 410 06 02 |
- | A 64 541 011 02 | - |
| 504 | PROPELLER SHAFT Replaced by: A 656 410 76 02 |
- | A 65 641 006 02 | - |
| 504 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1142 MM |
1 | A 65 641 076 02 | - |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 64 541 100 11 | - |
| 515 | DRIVE FLANGE Replaced by: A 656 411 03 11 |
- | A 65 641 100 11 | - |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 65 641 103 11 | - |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 64 541 001 31 | - |
| 518 | UNIVERSAL JOINT CROSS Replaced by: A 942 410 00 31 |
- | A 65 641 001 31 | - |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 94 241 000 31 | - |
| 521 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 524 | LOCK AS REQUIRED 2.50 MM |
8 | A 00 699 442 41 | - |
| 524 | LOCK AS REQUIRED 2.70 MM |
8 | A 00 699 450 41 | - |
| 524 | LOCK AS REQUIRED 3.00 MM |
8 | A 00 699 459 41 | - |
| 524 | LOCK AS REQUIRED 2.90 MM |
8 | A 65 641 110 73 | - |
| 524 | LOCK AS REQUIRED 3.00 MM |
8 | A 65 641 101 73 | - |
| 524 | LOCK Replaced by: A 656 411 06 73 |
- | A 65 641 105 73 | - |
| 524 | LOCK AS REQUIRED 3.10 MM |
8 | A 65 641 106 73 | - |
| 524 | LOCK AS REQUIRED 3.20 MM |
8 | A 65 641 109 73 | - |
| 524 | LOCK AS REQUIRED 3.25MM |
8 | A 65 641 114 73 | - |
| 524 | LOCK AS REQUIRED 3.30 MM |
8 | A 65 641 117 73 | - |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - |
| 530 | GREASE NIPPLE PROTECTIVE TUBE |
1 | N 071412 008102 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy