| № | Name | A* | Part number | A |
|---|---|---|---|---|
| 300 | PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING I 1511 MM |
1 | A 64 541 001 04 | - |
| 315 | DRIVE FLANGE STAGGERED TEETH |
1 | A 64 541 100 11 | - |
| 318 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
1 | A 64 541 001 31 | - |
| 321 | GREASE NIPPLE | 1 | N 071412 008302 | - |
| 324 | LOCK AS REQUIRED 2.50 MM |
4 | A 00 699 442 41 | - |
| 324 | LOCK AS REQUIRED 2.60 MM |
4 | A 00 699 446 41 | - |
| 324 | LOCK AS REQUIRED 2.70 MM |
4 | A 00 699 450 41 | - |
| 324 | LOCK AS REQUIRED 2.80 MM |
4 | A 00 699 454 41 | - |
| 324 | LOCK AS REQUIRED 2.90 MM |
4 | A 00 699 458 41 | - |
| 324 | LOCK AS REQUIRED 3.00 MM |
4 | A 00 699 459 41 | - |
| 336 | PROTECTIVE CAP | 1 | A 38 941 300 61 | - |
| 336 | PROTECTIVE CAP | 1 | A 39 541 300 61 | - |
| 400 | INTERMEDIATE BEARING Replaced by: A 395 410 06 22 |
- | A 39 541 000 22 | - |
| 400 | INTERMEDIATE BEARING Replaced by: A 655 410 00 22 |
- | A 39 541 006 22 | - |
| 400 | INTERMEDIATE BEARING INTERMEDIATE SHAFT BEARING |
1 | A 65 541 000 22 | - |
| 403 | BALL BEARING | 1 | A 00 298 192 25 | - |
| 403 | BALL BEARING | 1 | A 00 298 193 25 | - |
| 406 | SNAP RING | 2 | N 912009 110200 | - |
| 409 | PROTECTIVE CAP | 2 | A 38 741 302 61 | - |
| SPACER WASHER PROPELLER SHAFT BEARING |
2 | A 65 541 100 52 | - | |
| 412 | CENTERING FLANGE Replaced by: A 645 411 00 46 |
- | A 64 541 000 30 | - |
| 412 | FLANGE PROPELLER SHAFT BEARING |
1 | A 64 541 100 46 | - |
| 415 | PROTECTIVE CAP FOLLOWER FLANGE |
1 | A 38 941 300 61 | - |
| 415 | PROTECTIVE CAP FOLLOWER FLANGE |
1 | A 39 541 300 61 | - |
| 418 | SCREW FOLLOWER FLANGE TO PROPELLER SHAFT |
1 | A 38 999 000 19 | - |
| 421 | THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT |
1 | A 38 941 100 62 | - |
| 424 | BRACKET PROPELLER SHAFT BEARING I,LEFT |
1 | A 62 041 330 42 | - |
| 427 | BRACKET PROPELLER SHAFT BEARING I,RIGHT |
1 | A 62 041 331 42 | - |
| 500 | PROPELLER SHAFT FROM PROPELLER SHAFT BEARING TO REAR AXLE I 2244 MM |
1 | A 64 541 026 02 | - |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 64 541 100 11 | - |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 64 541 001 31 | - |
| 521 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 524 | LOCK AS REQUIRED 2.50 MM |
8 | A 00 699 442 41 | - |
| 524 | LOCK AS REQUIRED 2.60 MM |
8 | A 00 699 446 41 | - |
| 524 | LOCK AS REQUIRED 2.70 MM |
8 | A 00 699 450 41 | - |
| 524 | LOCK AS REQUIRED 2.80 MM |
8 | A 00 699 454 41 | - |
| 524 | LOCK AS REQUIRED 2.90 MM |
8 | A 00 699 458 41 | - |
| 524 | LOCK AS REQUIRED 3.00 MM |
8 | A 00 699 459 41 | - |
| 527 | SEAL RING PROTECTIVE TUBE 105X17 MM |
1 | A 39 541 100 59 | - |
| 527 | SEAL RING PROTECTIVE TUBE 102.5X22 MM |
1 | A 00 041 101 59 | - |
| 527 | SEAL RING PROTECTIVE TUBE 105.6X12 MM |
1 | A 00 041 102 59 | - |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - |
| 530 | GREASE NIPPLE PROTECTIVE TUBE |
1 | N 071412 008102 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy