| № | Name | A* | Part number |
|---|---|---|---|
| 20 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 1618 MM |
1 | A 699 410 45 04 |
| 30 | DRIVE FLANGE STAGGERED TEETH |
2 | A 645 411 00 11 |
| 40 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 645 410 01 31 |
| 50 | GREASE NIPPLE | 2 | N 071412 008302 |
| 60 | LOCK AS REQUIRED 2.50 MM |
8 | A 006 994 42 41 |
| 60 | LOCK AS REQUIRED 2.60 MM |
8 | A 006 994 46 41 |
| 60 | LOCK AS REQUIRED 2.70 MM |
8 | A 006 994 50 41 |
| 60 | LOCK AS REQUIRED 2.80 MM |
8 | A 006 994 54 41 |
| 60 | LOCK AS REQUIRED 2.90 MM |
8 | A 006 994 58 41 |
| 60 | LOCK AS REQUIRED 3.00 MM |
8 | A 006 994 59 41 |
| 70 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 70 | GREASE NIPPLE | 1 | N 071412 008102 |
| 80 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE I 695 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 395 410 25 02 |
| 90 | DRIVE FLANGE | 2 | A 395 411 08 11 |
| 100 | UNIVERSAL JOINT CROSS Replaced by: A 940 410 00 31 |
- | A 620 410 00 31 |
| 100 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 940 410 00 31 |
| 110 | GREASE NIPPLE | 2 | N 071412 008302 |
| 120 | LOCK AS REQUIRED 2.00 MM |
8 | A 006 994 31 41 |
| 120 | LOCK AS REQUIRED 2.10 MM |
8 | A 006 994 35 41 |
| 120 | LOCK AS REQUIRED 2.20 MM |
8 | A 006 994 39 41 |
| 130 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 130 | GREASE NIPPLE | 1 | N 071412 008102 |
| 140 | PROPELLER SHAFT FROM FRONT AXLE I TO FRONT AXLE II 918 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 389 410 14 02 |
| 150 | PROPELLER SHAFT FROM TRANSFER CASE TO FRONT AXLE 760 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 699 410 16 02 |
| 160 | DRIVE FLANGE TO 389 410 14 02 |
2 | A 389 411 05 11 |
| 160 | DRIVE FLANGE | 2 | A 389 411 07 11 |
| 170 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 16 28 |
- | A 000 410 02 31 |
| 170 | UNIVERSAL JOINT Replaced by: A 942 410 01 31 |
- | A 000 410 16 28 |
| 170 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 942 410 01 31 |
| 180 | GREASE NIPPLE | 2 | N 071412 008302 |
| 190 | LOCK AS REQUIRED 2.00 MM |
8 | A 006 994 19 41 |
| 190 | LOCK AS REQUIRED 2.10 MM |
8 | A 006 994 23 41 |
| 190 | LOCK AS REQUIRED 2.20 MM |
8 | A 006 994 27 41 |
| 200 | PLUG | 1 | N 900087 008000 |
| 205 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 205 | GREASE NIPPLE | 1 | N 071412 008102 |
| 210 | SCREW Replaced by: A 395 990 05 01 |
- | A 002 990 99 01 |
| 210 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
42 | A 395 990 05 01 |
| 210 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
4 | N 000960 014237 |
| 215 | LOCK WASHER PROPELLER SHAFT TO COUPLING FLANGE |
52 | N 912004 016101 |
| 215 | LOCK WASHER PROPELLER SHAFT TO COUPLING FLANGE |
8 | N 912004 014100 |
| 220 | NUT Replaced by: N 308673 016001 |
- | N 000934 016013 |
| 220 | NUT PROPELLER SHAFT TO COUPLING FLANGE |
52 | N 308673 016001 |
| 220 | NUT PROPELLER SHAFT TO COUPLING FLANGE |
8 | N 000934 014020 |
| 250 | COUPLING FLANGE FROM TRANSFER CASE TO FRONT AXLE 165 MM |
1 | A 617 283 01 45 |
| 260 | SEAL RING Replaced by: A 015 997 68 47 |
- | A 010 997 05 47 |
| 260 | SEAL RING DRIVE SHAFT |
1 | A 015 997 68 47 |
| 260 | SEAL RING Replaced by: A 016 997 03 47 |
- | A 010 997 23 47 |
| 260 | SEAL RING DRIVE SHAFT |
1 | A 016 997 03 47 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy