REAR AXLE

EPC / Mercedes / Bus / FG / FG 317.230 / 35 / 001
‹ ›

№- Name A* Part number
010 REAR AXLE
RATIO: 7:43 		001 A 317 350 17 01
020 AXLE HOUSING 001 A 317 350 21 20
028 SCREW 004 N 914126 018003
032 GASKET 001 A 327 351 00 79
036 FLANGE 001 A 327 997 00 65
043 BEARING BUSHING 001 A 327 353 04 38
046 SCREW PLUG 001 N 000906 018000
051 PIN 016 A 327 351 01 74
056 OIL COLLECTOR 002 A 347 357 00 82
THRUST RING
LEFT
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
001 A 317 356 03 15
THRUST RING
RIGHT
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
001 A 317 356 04 15
THRUST RING
FROM IDENT NO. 005380-600807 EXCEPT FOR
001 A 360 356 04 15
068 VALVE
Replaced by: A 383 351 00 65 		- A 312 350 10 90
068 FITTING 001 A 383 351 00 65
SCREW PLUG 002 A 186 997 00 32
PAD
0.1 MM 		NB A 327 351 00 19
PAD
0.3 MM 		NB A 327 351 01 19
PAD
Replaced by: A 327 351 01 19 		- A 327 351 02 19
PAD
0.5 MM 		NB A 327 351 01 19
081 THRUST WASHER
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 317 357 00 62
081 SPACER WASHER
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 360 356 00 52
083 GROOVED NUT
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
004 A 617 356 00 26
083 GROOVED NUT
FROM IDENT NO. 005380-600807 EXCEPT FOR
004 A 385 356 00 26
085 LOCK PLATE
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 N 070952 085100
085 LOCK PLATE
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 N 070952 075103
090 WHEEL HUB
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 317 356 03 01
090 WHEEL HUB
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 370 356 01 01
092 WHEEL MOUNTING BOLT

FROM IDENT NO. 001914 ALSO INSTALLED ON 001904,001911 		020 A 677 401 00 71
092 WHEEL MOUNTING BOLT

UP TO IDENT NO. 001913 EXCEPT FOR 001904,001911 		020 A 389 401 01 71
095 OIL COLLECTOR 002 A 317 356 01 82
095 OIL COLLECTOR
Replaced by: A 385 356 02 82 		- A 360 356 00 82
095 OIL COLLECTOR
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 385 356 02 82
099 SEAL RING
002 A 001 997 02 46
099 SEAL RING

LENGTH AVAILABLE:25000 MM
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 006 997 40 46
104 SPACER RING
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 360 356 00 51
111 TAPERED ROLLER BEARING
002 A 000 981 21 05
111 TAPERED ROLLER BEARING

LENGTH AVAILABLE:25000 MM
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 000 981 85 05
111 TAPERED ROLLER BEARING
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 002 981 86 05
111 TAPERED ROLLER BEARING
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 002 981 89 05
111 TAPERED ROLLER BEARING
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 001 980 27 02
117 TAPERED ROLLER BEARING
002 A 002 981 17 05
117 TAPERED ROLLER BEARING
002 A 002 981 18 05
117 TAPERED ROLLER BEARING

LENGTH AVAILABLE:25000 MM
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 000 981 83 05
117 TAPERED ROLLER BEARING
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 002 981 90 05
117 TAPERED ROLLER BEARING
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 003 981 86 05
117 TAPERED ROLLER BEARING
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 000 980 96 02
120 BRAKE DRUM
002 A 317 423 01 01
120 BRAKE DRUM

FROM IDENT NO. 001732-001913 EXCEPT FOR 001904,001911 		002 A 317 423 03 01
120 BRAKE DRUM

LENGTH AVAILABLE:25000 MM
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 317 423 08 01
120 BRAKE DRUM
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 317 423 12 01
125 REAR AXLE SHAFT
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 317 357 02 01
125 REAR AXLE SHAFT
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 385 357 15 01
127 GASKET
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 317 356 00 80
127 GASKET
Replaced by: A 943 334 00 80 		- A 327 356 01 80
127 GASKET
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 943 334 00 80
129 HUB CAP
TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
002 A 317 356 00 20
129 HUB CAP
FROM IDENT NO. 005380-600807 EXCEPT FOR
002 A 327 356 01 20
131 SCREW 016 N 000933 008145
132 LOCK WASHER 016 N 912004 008102
136 SCREW 001 A 354 351 00 71
138 NUT
Replaced by: N 308675 014000 		- N 000936 014010
138 NUT
Replaced by: N 308675 014002 		- N 308675 014000
138 NUT

FROM IDENT NO. 001913 EXCEPT FOR 001904,001911 		001 N 308675 014002
138 NUT

FROM IDENT NO. 001914-002338 ALSO INSTALLED ON 001904,001911 		001 N 080705 014002
142 SCREW COLLAR 002 A 354 353 00 25
146 LOCK 002 A 327 353 03 73
148 TOOTHED WASHER 002 N 006797 008120
150 SCREW
Replaced by: N 304017 008016 		- N 000933 008212
150 SCREW 002 N 304017 008016
153 SLIDE

APPLICABLE TO VEHICLES EQUIPPED WITH CENTRAL LUBRICATION SYSTEM 		001 A 312 353 10 49
153 SLIDE

APPLICABLE TO VEHICLES NOT EQUIPPED WITH CENTRAL LUBRICATION SYSTEM 		001 A 317 353 00 49
156 SET SCREW
Replaced by: A 385 353 03 76 		- A 317 353 02 76
156 SET SCREW
105 MM 		001 A 385 353 03 76
159 NUT

APPLICABLE TO VEHICLES EQUIPPED WITH CENTRAL LUBRICATION SYSTEM 		001 N 000936 022002
159 NUT

APPLICABLE TO VEHICLES NOT EQUIPPED WITH CENTRAL LUBRICATION SYSTEM 		001 N 000936 030000
162 GASKET
THE OLD PART MUST NO LONGER BE INSTALLED
Replaced by: A 383 351 05 80 		- A 317 351 02 80
162 GASKET 001 A 383 351 05 80
168 COVER 001 A 302 350 00 21
172 SCREW
Replaced by: N 304017 010028 		- N 000933 010238
172 SCREW 016 N 304017 010028
176 LOCK WASHER 016 N 912004 010102
180 DIFFERENTIAL GEAR
Replaced by: A 361 350 72 23 		- A 361 350 55 23
185 DIFFERENTIAL GEAR
Replaced by: A 352 350 26 23 		- A 361 350 72 23
DIFFERENTIAL SPIDER;PIVOT: 
185 DIFFERENTIAL GEAR
DIFFERENTIAL SPIDER;PIVOT: 29 MM 		001 A 352 350 26 23
188 SCREW
FROM REAR AXLE 000500 UP TO IDENT NO. 004800 EXCEPT FOR 004796
008 A 327 990 02 01
188 SCREW
DIFFERENTIAL SPIDER;PIVOT: 30 MM
FROM IDENT NO. 005438 EXCEPT FOR,005451,005455
008 A 361 990 00 04
188 SCREW
FROM REAR AXLE 000500 UP TO IDENT NO. 004800 EXCEPT FOR 004796
004 A 327 990 01 01
192 SCREW
DIFFERENTIAL SPIDER;PIVOT: 30 MM
FROM IDENT NO. 005438 EXCEPT FOR,005451,005455
004 A 361 990 01 04
192 SCREW
DIFFERENTIAL SPIDER;PIVOT: 29 MM
FROM IDENT NO. 005438 EXCEPT FOR,005451,005455
012 N 914112 014310
195 DIFFERENTIAL SPIDER
30 MM 		001 A 360 353 00 20
195 DIFFERENTIAL SPIDER
29 MM 		001 A 301 353 00 20
199 DIFFERENTIAL PINION
DIFFERENTIAL SPIDER;PIVOT: 30 MM 		004 A 354 353 00 14
199 DIFFERENTIAL PINION
DIFFERENTIAL SPIDER;PIVOT: 29 MM 		004 A 385 353 01 14
201 THRUST WASHER
DIFFERENTIAL PINION 1.5 X 30 MM
FROM IDENT NO. 002125-002689 AND FROM IDENT NO. 003724 ALSO INSTALLED ON 002708,003720
004 A 327 353 46 62
201 THRUST WASHER
DIFFERENTIAL PINION 1.5 X 30 MM
FROM IDENT NO. 002125-002689 AND FROM IDENT NO. 003724 ALSO INSTALLED ON 002708,003720
004 A 327 353 47 62
201 THRUST WASHER
DIFFERENTIAL PINION 1.00 X 29 MM
FROM IDENT NO. 002125-002689 AND FROM IDENT NO. 003724 ALSO INSTALLED ON 002708,003720
004 A 385 353 37 62
201 THRUST WASHER
DIFFERENTIAL PINION 1.00 X 29 MM
FROM IDENT NO. 002125-002689 AND FROM IDENT NO. 003724 ALSO INSTALLED ON 002708,003720
004 A 385 353 12 62
205 SIDE GEAR
DIFFERENTIAL SPIDER;PIVOT: 30MM 		002 A 354 353 00 15
205 SIDE GEAR
DIFFERENTIAL SPIDER;PIVOT: 29 MM 		002 A 301 353 01 15
207 REPAIR KIT
DIFFERENTIAL SPIDER;PIVOT: 30 MM 		001 A 354 586 00 35
207 REPAIR KIT
DIFFERENTIAL SPIDER;PIVOT: 29 MM 		001 A 352 350 00 40
209 THRUST WASHER
1.5 MM 		NB A 327 353 32 62
209 THRUST WASHER
1.6 MM 		NB A 327 353 34 62
209 THRUST WASHER
1.7 MM 		NB A 327 353 36 62
209 THRUST WASHER
1.8 MM 		NB A 327 353 37 62
213 TAPERED ROLLER BEARING 002 A 006 981 04 05
213 TAPERED ROLLER BEARING 002 A 001 981 72 05
213 TAPERED ROLLER BEARING 002 A 001 981 64 05
213 TAPERED ROLLER BEARING 002 A 004 981 74 05
215 RING GEAR AND PINION

USED WITH FULLY AUTOMATIC CENTRAL LUBRICATION SYSTEM 		001 A 317 350 36 39
215 RING GEAR AND PINION
Replaced by: A 302 350 21 39 		- A 361 350 12 39
215 RING GEAR AND PINION
ON VEHICLES WITH 11 LUBRICATION POINTS
001 A 302 350 21 39
222 SCREW
RING GEAR TO DIFFERENTIAL CASE

FROM IDENT NO. 001462-001913 EXCEPT FOR 001904-001911 		018 A 327 990 09 01
222 SCREW
RING GEAR TO DIFFERENTIAL CASE

FROM IDENT NO. 001914-005107 ALSO INSTALLED ON 001904-001911

FROM IDENT NO. 001980-004328 EXCEPT FOR 001981-001985,001987 		018 A 327 990 16 01
222 SCREW
RING GEAR TO DIFFERENTIAL CASE

FROM CHASSIS 003724 ALSO INSTALLED ON 003720 		018 A 385 990 11 01
230 CYLINDR. ROLLER BEARING
001 A 317 981 00 01
230 CYLINDR. ROLLER BEARING

FROM IDENT NO. 601030 EXCEPT FOR 600972 		001 A 327 981 06 01
230 CYLINDR. ROLLER BEARING
ON VEHICLES WITH 11 LUBRICATION POINTS
001 A 000 981 97 01
230 CYLINDR. ROLLER BEARING
ON VEHICLES WITH 11 LUBRICATION POINTS
001 A 003 981 17 01
230 CYLINDR. ROLLER BEARING
ON VEHICLES WITH 11 LUBRICATION POINTS
001 A 006 981 19 01
233 SNAP RING
INSIDE 		001 A 317 994 00 37
233 SNAP RING
OUTSIDE

USED WITH FULLY AUTOMATIC CENTRAL LUBRICATION SYSTEM 		001 A 317 994 01 37
236 SNAP RING
OUTSIDE
ON VEHICLES WITH 11 LUBRICATION POINTS
001 A 302 994 00 37
239 SPACER WASHER
0.1 MM 		NB A 317 353 13 52
239 SPACER WASHER
0.2 MM 		NB A 317 353 14 52
239 SPACER WASHER
0.5 MM 		NB A 317 353 15 52
242 TAPERED ROLLER BEARING
ON PINION END

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		001 A 003 981 12 05
242 TAPERED ROLLER BEARING
ON PINION END

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		001 A 003 981 19 05
242 TAPERED ROLLER BEARING

FROM IDENT NO. 001928 ALSO INSTALLED ON 001904,001906-001920,001922-001926 		002 A 000 981 65 05
242 TAPERED ROLLER BEARING
OUTSIDE

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		001 A 000 981 65 05
242 TAPERED ROLLER BEARING

FROM IDENT NO. 001928 ALSO INSTALLED ON 001904,001906-001920,001922-001926 		002 A 000 981 77 05
242 TAPERED ROLLER BEARING
OUTSIDE

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		001 A 000 981 77 05
242 TAPERED ROLLER BEARING

FROM IDENT NO. 001928 ALSO INSTALLED ON 001904,001906-001920,001922-001926 		002 A 001 981 99 05
242 TAPERED ROLLER BEARING
OUTSIDE

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		001 A 001 981 99 05
246 SPACER RING
15.5 MM

FROM IDENT NO. 001928 ALSO INSTALLED ON 001904,001906-001920,001922-001926 		001 A 327 353 08 51
246 SPACER RING
16.0 MM 		001 A 317 353 00 51
246 SPACER RING
16.7 MM 		001 A 317 353 01 51
246 SPACER RING

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		001 A 370 353 00 51
246 SPACER WASHER
8.80 MM

FROM IDENT NO. 001928 ALSO INSTALLED ON 001904,001906-001920,001922-001926 		NB A 327 353 70 52
246 SPACER WASHER
8.86 MM

FROM IDENT NO. 001928 ALSO INSTALLED ON 001904,001906-001920,001922-001926 		NB A 327 353 73 52
246 SPACER WASHER
9.38 MM

FROM IDENT NO. 001928 ALSO INSTALLED ON 001904,001906-001920,001922-001926 		NB A 327 353 99 52
246 SPACER WASHER
6.96 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 09 52
246 SPACER WASHER
6.98 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 10 52
246 SPACER WASHER
7.04 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 13 52
246 SPACER WASHER
7.10 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 16 52
246 SPACER WASHER
7.16 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 19 52
246 SPACER WASHER
7.22 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 22 52
246 SPACER TUBE
7.24 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 23 53
246 SPACER WASHER
TAPERED ROLLER BEARING TO DRIVE PINION 7.28 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 25 52
246 SPACER WASHER
TAPERED ROLLER BEARING TO DRIVE PINION 7.32 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 27 52
246 SPACER WASHER
TAPERED ROLLER BEARING TO DRIVE PINION 7.34 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 28 52
246 SPACER WASHER
TAPERED ROLLER BEARING TO DRIVE PINION 7.40 MM

FROM IDENT NO. 601031 ALSO INSTALLED ON 600972 		NB A 370 353 31 52
252 DRIVE PINION
8.98 MM

FROM IDENT NO. 001928 ALSO INSTALLED ON 001904,001906-001920,001922-001926 		NB A 327 353 20 64
262 THRUST WASHER
UP TO IDENT NO. 001927 EXCEPT FOR 001904,001906-001920,001922-001926
001 A 385 353 38 62
262 THRUST WASHER

FROM IDEN NO. 001927 EXCEPT FOR 001904,001906-001920,001922-001926 		001 A 385 353 10 62
265 SCREW COLLAR
UP TO REAR AXLE 9500102 1 FLANGE 317 350 01 45 RANGE OF DELIVERY INCLUDES
001 A 317 353 01 25
268 LOCK

RANGE OF DELIVERY INCLUDES UP TO REAR AXLE 000 427 1 X 317 426 00 40, 1 X 317 993 09 10, 1 X 317 426 00 74, 1 X 317 421 03 67 		001 A 312 353 11 73
268 LOCK
001 A 327 353 03 73
272 TOOTHED WASHER 001 N 006797 008120
278 SCREW
Replaced by: N 304017 008039 		- N 000933 008130
278 SCREW 001 N 304017 008039
282 SEAL RING 001 A 016 997 68 47
285 FLANGE
UP TO IDENT NO. 003341 EXCEPT FOR SEE FOONOTE 007
001 A 337 350 03 45
285 FLANGE

FROM IDEN NO. 001927 EXCEPT FOR 001904,001906-001920,001922-001926 		001 A 360 350 00 45
285 FLANGE
FROM REAR AXLE 000500-034674 UP TO IDENT NO. 004800 EXCEPT FOR 004796
001 A 360 350 04 45
288 PROTECTIVE PLATE 001 A 327 353 02 91
290 NUT 001 A 385 351 01 72
300 CONTROL ARM
Replaced by: A 600 330 01 11 		- A 317 350 07 06
300 THRUST ARM
TOP 		002 A 600 330 01 11
303 RUBBER RING 002 A 317 333 11 64
309 BEARING BODY
Replaced by: A 317 352 15 41 		- A 317 352 07 41
309 BEARING BODY 001 A 317 352 15 41
311 SCREW 003 A 307 990 00 14
316 BUSHING
30 MM 		002 A 317 351 03 50
319 SCREW 006 A 317 990 00 19
322 BEARING BRACKET
Replaced by: A 307 330 00 13 		- A 317 330 02 13
322 BEARING BRACKET 004 A 307 330 00 13
325 PIN 004 A 317 333 01 74
332 WASHER
1.0 MM 		NB A 317 990 13 40
332 WASHER
2.0 MM 		NB A 317 990 14 40
SHIM
1.0 MM 		NB A 322 333 01 84
SHIM
2.5 MM 		NB A 322 333 00 84
SCREW

FROM IDENT NO. 005284 EXCEPT FOR 005277-005279 		016 N 000960 018016
SCREW

FROM IDENT NO. 005285 ALSO INSTALLED ON 005277-005279 		016 N 000960 018142
NUT

FROM IDENT NO. 005284 EXCEPT FOR 005277-005279 		016 N 000935 018000
NUT

FROM IDENT NO. 005285 ALSO INSTALLED ON 005277-005279 		016 N 913001 018000
339 CONTROL ARM
Replaced by: A 357 330 34 11 		- A 317 350 06 06
339 THRUST ARM
BOTTOM 		002 A 357 330 34 11
342 RUBBER RING 002 A 317 333 11 64
348 HOUSING

Replaced by: A 317 352 04 41 		- A 317 350 01 41
348 BEARING BODY

FROM IDENT NO. 850060 EXCEPT FOR 850059 		002 A 317 352 04 41
348 BEARING BODY
FROM IDENT NO. 850061 ALSO INSTALLED ON 850059
002 A 317 352 12 41
348 BEARING BODY
ON VEHICLES WITH 11 LUBRICATION POINTS
002 A 317 352 16 41
351 NUT 002 A 000 990 14 55
354 THRUST WASHER 008 A 317 333 01 62
356 LOCK WASHER 024 N 912004 012100
359 SCREW
M 12X1,5X40 		024 A 317 990 00 14
359 SCREW
12X1,5X50 		024 A 307 990 00 14
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA