TRANSMISSION SHAFTS AND GEARS
| №- | Name | A* | Part number | A |
|---|---|---|---|---|
| 003 | DRIVE SHAFT Replaced by: A 387 262 46 02 |
- | A 38 726 233 02 | - |
| 003 | DRIVE SHAFT | 001 | A 38 726 246 02 | - |
| 006 | CYLINDR. ROLLER BEARING Replaced by: A 008 981 52 01 |
- | A 00 498 130 01 | - |
| 006 | CYLINDR. ROLLER BEARING DRIVE SHAFT |
001 | A 00 898 152 01 | - |
| 006 | CYLINDR. ROLLER BEARING Replaced by: A 008 981 52 01 |
- | A 00 498 131 01 | - |
| 006 | CYLINDR. ROLLER BEARING DRIVE SHAFT |
001 | A 00 498 133 01 | - |
| 006 | CYLINDR. ROLLER BEARING Replaced by: A 008 981 52 01 |
- | A 00 698 128 01 | - |
| 006 | CYLINDR. ROLLER BEARING DRIVE SHAFT |
001 | A 00 798 157 01 | - |
| 009 | SHIM FRONT DRIVE SHAFT |
001 | A 38 726 401 47 | - |
| 009 | SHIM FRONT DRIVE SHAFT |
001 | A 38 726 408 47 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 3.93 MM |
001 | A 38 726 246 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 3.97 MM |
001 | A 38 726 215 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.02 MM |
001 | A 38 726 247 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.07 MM |
001 | A 38 726 214 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.12 MM |
001 | A 38 726 248 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.17 MM |
001 | A 38 726 213 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.22 MM |
001 | A 38 726 249 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.27 MM |
001 | A 38 726 212 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.31 MM |
001 | A 38 726 250 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.40 MM |
001 | A 38 726 251 30 | - |
| 012 | RING HALF DRIVE SHAFT;AS REQUIRED 4.45 MM |
001 | A 38 926 208 30 | - |
| 015 | LOCK FRONT DRIVE SHAFT |
001 | A 38 726 202 73 | - |
| 016 | SPRING PIN FRONT DRIVE SHAFT |
001 | N 007346 005015 | - |
| 018 | MAIN SHAFT | 001 | A 38 726 219 05 | - |
| 021 | NEEDLE CAGE 4TH SPEED GEAR |
001 | A 01 098 186 10 | - |
| 021 | NEEDLE BEARING 4TH SPEED GEAR |
001 | A 01 098 193 10 | - |
| 024 | GEAR 4TH SPEED |
001 | A 38 726 228 14 | - |
| 024 | GEAR 4TH SPEED |
001 | A 38 726 243 14 | - |
| 027 | SYNCHRONIZER BODY 4TH AND 5TH SPEED |
001 | A 38 726 220 35 | - |
| 030 | SLIDING COLLAR Replaced by: A 387 262 05 23 |
- | A 38 726 202 23 | - |
| 030 | SLIDING COLLAR Replaced by: A 387 262 15 23 |
- | A 38 726 205 23 | - |
| 030 | SLIDING COLLAR 4TH AND 5TH SPEED |
001 | A 38 726 215 23 | - |
| 030 | SLIDING COLLAR 6TH AND 7TH SPEED |
001 | A 38 726 215 23 | - |
| 030 | SLIDING COLLAR 4TH AND 5TH SPEED |
001 | A 38 726 214 23 | - |
| 030 | SLIDING COLLAR 6TH AND 7TH SPEED |
001 | A 38 726 215 23 | - |
| 033 | LOCK MAINSHAFT; AS REQUIRED 2.90 MM |
001 | A 38 726 241 73 | - |
| 033 | LOCK MAINSHAFT; AS REQUIRED 2.95 MM |
001 | A 38 726 242 73 | - |
| 033 | LOCK MAINSHAFT; AS REQUIRED 3.00 MM |
001 | A 38 726 243 73 | - |
| 033 | LOCK MAINSHAFT; AS REQUIRED 3.05 MM |
001 | A 38 726 244 73 | - |
| 033 | LOCK MAINSHAFT; AS REQUIRED 3.10 MM |
001 | A 38 726 245 73 | - |
| 033 | LOCK MAINSHAFT; AS REQUIRED 3.15 MM |
001 | A 38 726 246 73 | - |
| 033 | LOCK MAINSHAFT; AS REQUIRED 3.20 MM |
001 | A 38 726 297 73 | - |
| 036 | SYNCHRONIZER RING Replaced by: A 387 262 41 34 |
- | A 38 726 227 34 | - |
| 036 | SYNCHRONIZER RING Replaced by: A 387 262 45 34 |
- | A 38 726 241 34 | - |
| 036 | SYNCHRONIZER RING 5TH SPEED |
001 | A 38 726 245 34 | - |
| 036 | SYNCHRONIZER RING 5TH SPEED |
001 | A 38 726 248 34 | - |
| 039 | SYNCHRONIZER CONE Replaced by: A 387 262 15 37 |
- | A 38 726 206 37 | - |
| 039 | SYNCHRONIZER CONE Replaced by: A 389 262 25 37 |
- | A 38 726 215 37 | - |
| 039 | SYNCHRONIZER CONE Replaced by: A 389 262 06 37 |
- | A 38 926 225 37 | - |
| 039 | SYNCHRONIZER CONE Replaced by: A 389 262 24 37 |
- | A 38 726 208 37 | - |
| 039 | SYNCHRONIZER CONE Replaced by: A 389 262 06 37 |
- | A 38 926 224 37 | - |
| 039 | SYNCHRONIZER CONE Replaced by: A 389 262 06 37 |
- | A 38 926 210 37 | - |
| 039 | SYNCHRONIZER CONE Replaced by: A 389 262 06 37 |
- | A 38 926 213 37 | - |
| 039 | SYNCHRONIZER CONE Replaced by: A 389 262 06 37 |
- | A 38 926 231 37 | - |
| 039 | SYNCHRONIZER CONE 4TH THRU 7TH SPEED |
004 | A 38 926 206 37 | - |
| 039 | SYNCHRONIZED CONE 4TH THRU 7TH SPEED |
004 | A 94 526 004 50 | - |
| 042 | SPRING Replaced by: A 387 262 09 93 |
- | A 38 726 206 93 | - |
| 042 | SPRING Replaced by: A 387 262 10 93 |
- | A 38 726 209 93 | - |
| 042 | SPRING 4TH THRU 7TH SPEED |
004 | A 38 726 210 93 | - |
| 045 | ROLLER ASSEMBLY 5TH SPEED |
002 | A 32 798 102 12 | - |
| 045 | ROLLER ASSEMBLY 5TH SPEED |
002 | A 00 098 167 12 | - |
| 048 | GEAR Replaced by: A 387 262 19 15 |
- | A 38 726 212 15 | - |
| 048 | GEAR 5TH SPEED |
001 | A 38 726 219 15 | - |
| 051 | BUSHING 6TH SPEED |
001 | A 38 726 213 50 | - |
| 054 | NEEDLE BEARING 6TH SPEED |
001 | A 01 098 191 10 | - |
| 054 | NEEDLE BEARING 6TH SPEED |
001 | A 01 098 195 10 | - |
| 057 | GEAR 6TH SPEED |
001 | A 38 726 203 16 | - |
| 060 | SYNCHRONIZER RING Replaced by: A 387 262 49 34 |
- | A 38 726 210 34 | - |
| 060 | SYNCHRONIZER RING 6TH SPEED |
001 | A 38 726 249 34 | - |
| 063 | SYNCHRONIZER BODY 6TH AND 7TH SPEED |
001 | A 38 726 209 35 | - |
| 066 | SPACER WASHER Replaced by: A 387 262 19 52 |
- | A 38 726 220 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.30 MM |
001 | A 38 726 219 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.40 MM |
001 | A 38 726 240 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.45 MM |
001 | A 38 726 241 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.50 MM |
001 | A 38 726 242 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.55 MM |
001 | A 38 726 243 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.60 MM |
001 | A 38 726 244 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.65 MM |
001 | A 38 726 245 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.70 MM |
001 | A 38 726 229 52 | - |
| 066 | SPACER WASHER MAINSHAFT; AS REQUIRED 0.75 MM |
001 | A 38 726 246 52 | - |
| 069 | LOCK MAINSHAFT; AS REQUIRED 2.65 MM |
001 | A 38 726 212 73 | - |
| 069 | LOCK MAINSHAFT; AS REQUIRED 2.90 MM |
001 | A 38 799 403 41 | - |
| 069 | RETAINING RING MAINSHAFT; AS REQUIRED 3.00 MM |
001 | N 900055 050300 | - |
| 069 | LOCK MAINSHAFT; AS REQUIRED 3.05 MM |
001 | A 38 726 214 73 | - |
| 069 | LOCK MAINSHAFT; AS REQUIRED 3.10 MM |
001 | A 38 726 215 73 | - |
| 069 | LOCK MAINSHAFT; AS REQUIRED 3.15 MM |
001 | A 38 726 216 73 | - |
| 072 | SYNCHRONIZER RING Replaced by: A 387 262 52 34 |
- | A 38 726 228 34 | - |
| 072 | SYNCHRONIZER RING CONSTANT |
001 | A 38 726 252 34 | - |
| 075 | ROLLER ASSEMBLY MAIN SHAFT,FRONT |
001 | A 00 298 114 12 | - |
| 075 | ROLLER ASSEMBLY MAIN SHAFT,FRONT |
001 | A 00 298 121 12 | - |
| 078 | RETAINING RING MAIN SHAFT,FRONT |
001 | N 000471 035000 | - |
| 081 | NEEDLE BEARING 3RD SPEED |
001 | A 00 998 118 10 | - |
| 081 | NEEDLE BEARING 3RD SPEED |
001 | A 00 898 196 10 | - |
| 084 | GEAR 3RD SPEED |
001 | A 38 726 231 13 | - |
| 084 | GEAR 3RD SPEED |
001 | A 38 726 250 13 | - |
| 087 | SYNCHRONIZER BODY 2ND AND 3RD SPEED |
001 | A 38 726 204 35 | - |
| 087 | SYNCHRONIZER BODY 2ND AND 3RD SPEED |
001 | A 38 726 234 35 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 387 262 16 37 |
- | A 38 726 207 37 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 389 262 27 37 |
- | A 38 726 216 37 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 389 262 07 37 |
- | A 38 926 227 37 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 389 262 26 37 |
- | A 38 726 209 37 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 389 262 11 37 |
- | A 38 926 226 37 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 389 262 07 37 |
- | A 38 926 211 37 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 389 262 07 37 |
- | A 94 526 006 50 | - |
| 090 | SYNCHRONIZER CONE 2ND AND 3RD SPEED |
002 | A 38 926 207 37 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 389 262 07 37 |
- | A 38 926 214 37 | - |
| 090 | SYNCHRONIZER CONE Replaced by: A 389 262 07 37 |
- | A 38 926 232 37 | - |
| 093 | SPRING Replaced by: A 387 262 08 93 |
- | A 38 726 207 93 | - |
| 093 | SPRING 2ND AND 3RD SPEED |
002 | A 38 726 208 93 | - |
| 096 | SLIDING COLLAR Replaced by: A 387 262 06 23 |
- | A 38 726 201 23 | - |
| 096 | SLIDING COLLAR 2ND AND 3RD SPEED |
001 | A 38 726 206 23 | - |
| 096 | SLIDING COLLAR 2ND AND 3RD SPEED |
001 | A 38 726 213 23 | - |
| 099 | LOCK OUTPUT SHAFT;AS REQUIRED 2.90 MM |
001 | A 38 726 234 73 | - |
| 099 | LOCK OUTPUT SHAFT;AS REQUIRED 2.95 MM |
001 | A 38 726 235 73 | - |
| 099 | LOCK OUTPUT SHAFT;AS REQUIRED 3.00 MM |
001 | A 38 726 236 73 | - |
| 099 | LOCK OUTPUT SHAFT;AS REQUIRED 3.05 MM |
001 | A 38 726 237 73 | - |
| 099 | LOCK OUTPUT SHAFT;AS REQUIRED 3.10 MM |
001 | A 38 726 238 73 | - |
| 099 | LOCK OUTPUT SHAFT;AS REQUIRED 3.15 MM |
001 | A 38 726 239 73 | - |
| 102 | NEEDLE BEARING Replaced by: A 021 981 94 10 |
- | A 00 898 185 10 | - |
| 102 | NEEDLE BEARING Replaced by: A 021 981 94 10 |
- | A 00 898 198 10 | - |
| 102 | NEEDLE BEARING Replaced by: A 021 981 94 10 |
- | A 01 998 106 10 | - |
| 102 | NEEDLE BEARING 2ND SPEED |
001 | A 02 198 194 10 | - |
| 105 | GEAR 2ND SPEED |
001 | A 38 726 219 12 | - |
| 105 | GEAR 2ND SPEED |
001 | A 38 726 229 12 | - |
| 105 | GEAR 2ND SPEED |
001 | A 38 726 240 12 | - |
| 108 | FOLLOWER RING 1ST SPEED AND REVERSE |
001 | A 38 726 201 36 | - |
| 108 | SYNCHRONIZER BODY 1ST SPEED AND REVERSE |
001 | A 38 726 229 35 | - |
| 111 | SLIDING COLLAR 1ST SPEED AND REVERSE |
001 | A 38 726 203 23 | - |
| 114 | LOCK OUTPUT SHAFT;AS REQUIRED 2.40 MM |
001 | A 38 726 261 73 | - |
| 114 | LOCK OUTPUT SHAFT;AS REQUIRED 2.50 MM |
001 | A 38 726 263 73 | - |
| 114 | LOCK OUTPUT SHAFT;AS REQUIRED 2.60 MM |
001 | A 38 726 265 73 | - |
| 114 | LOCK OUTPUT SHAFT;AS REQUIRED 2.75 MM |
001 | A 38 726 282 73 | - |
| 114 | LOCK OUTPUT SHAFT;AS REQUIRED 2.80 MM |
001 | A 38 726 283 73 | - |
| 114 | LOCK OUTPUT SHAFT;AS REQUIRED 2.90 MM |
001 | A 38 726 255 73 | - |
| 114 | LOCK Replaced by: A 387 262 57 73 |
- | A 38 726 256 73 | - |
| 114 | LOCK OUTPUT SHAFT;AS REQUIRED 3.00 MM |
001 | A 38 726 257 73 | - |
| 114 | LOCK Replaced by: A 387 262 59 73 |
- | A 38 726 258 73 | - |
| 114 | LOCK Replaced by: A 387 262 59 73 |
- | A 38 726 260 73 | - |
| 114 | LOCK OUTPUT SHAFT;AS REQUIRED 3.10 MM |
001 | A 38 726 259 73 | - |
| 117 | FOLLOWER 1ST SPEED |
001 | A 38 726 200 40 | - |
| 117 | FOLLOWER 1ST SPEED |
001 | A 38 726 202 40 | - |
| 117 | FOLLOWER Replaced by: A 387 262 04 40 |
- | A 38 726 203 40 | - |
| 117 | FOLLOWER 1ST SPEED |
001 | A 38 726 204 40 | - |
| 120 | NEEDLE BEARING REVERSE SPEED GEAR |
001 | A 01 098 192 10 | - |
| 120 | NEEDLE BEARING REVERSE SPEED GEAR |
001 | A 01 098 196 10 | - |
| 123 | DOG CLUTCH GEAR REVERSE SPEED |
001 | A 38 726 207 33 | - |
| 123 | DOG CLUTCH GEAR Replaced by: A 387 262 17 33 |
- | A 38 726 214 33 | - |
| 123 | DOG CLUTCH GEAR REVERSE SPEED |
001 | A 38 726 217 33 | - |
| 126 | NEEDLE BEARING Replaced by: A 010 981 12 10 |
- | A 00 898 188 10 | - |
| 126 | NEEDLE BEARING 1ST SPEED |
002 | A 01 098 112 10 | - |
| 126 | NEEDLE BEARING Replaced by: A 014 981 34 10 |
- | A 00 998 103 10 | - |
| 126 | NEEDLE BEARING 1ST SPEED |
002 | A 01 498 134 10 | - |
| 129 | GEAR 1ST SPEED |
001 | A 38 726 217 11 | - |
| 129 | GEAR 1ST SPEED |
001 | A 38 726 218 11 | - |
| 129 | GEAR 1ST SPEED |
001 | A 38 726 222 11 | - |
| 150 | COUNTERSHAFT Replaced by: A 387 263 27 02 |
- | A 38 726 318 02 | - |
| 150 | COUNTERSHAFT | 001 | A 38 726 327 02 | - |
| 150 | COUNTERSHAFT | 001 | A 38 726 330 02 | - |
| 153 | GEAR 4TH AND 5TH SPEED |
001 | A 38 726 306 14 | - |
| 156 | GEAR 6TH SPEED |
001 | A 38 726 303 16 | - |
| 159 | GEAR CONSTANT |
001 | A 38 726 313 10 | - |
| 162 | TAPERED ROLLER BEARING Replaced by: A 009 981 31 05 |
- | A 00 798 110 05 | - |
| 162 | TAPERED ROLLER BEARING COUNTERSHAFT,FRONT |
001 | A 00 998 131 05 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.25 MM |
001 | A 38 799 416 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.35 MM |
001 | A 38 799 415 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.40 MM |
001 | A 38 799 414 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.45 MM |
001 | A 38 799 413 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.50 MM |
001 | A 38 799 412 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.55 MM |
001 | A 38 799 411 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.60 MM |
001 | A 38 799 410 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.65 MM |
001 | A 38 799 409 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.70 MM |
001 | A 38 799 408 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.75 MM |
001 | A 38 799 407 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.80 MM |
001 | A 38 799 406 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.85 MM |
001 | A 38 799 405 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.90 MM |
001 | A 38 799 404 41 | - |
| 165 | LOCK COUNTERSHAFT;AS REQUIRED 2.95 MM |
001 | A 38 799 403 41 | - |
| 168 | TAPERED ROLLER BEARING Replaced by: A 009 981 03 05 |
- | A 00 198 137 05 | - |
| 168 | TAPERED ROLLER BEARING COUNTERSHAFT,REAR |
001 | A 00 998 103 05 | - |
| 168 | TAPERED ROLLER BEARING Replaced by: A 010 981 59 05 |
- | A 00 198 151 05 | - |
| 168 | TAPERED ROLLER BEARING COUNTERSHAFT,REAR |
001 | A 00 698 142 05 | - |
| 168 | TAPERED ROLLER BEARING COUNTERSHAFT,REAR |
001 | A 01 098 163 05 | - |
| 168 | TAPERED ROLLER BEARING Replaced by: A 010 981 59 05 |
- | A 00 698 154 05 | - |
| 168 | TAPERED ROLLER BEARING COUNTERSHAFT,REAR |
001 | A 01 098 159 05 | - |
| 171 | REVERSE IDLER SHAFT | 001 | A 38 726 305 30 | - |
| 171 | REVERSE IDLER SHAFT | 001 | A 38 726 314 30 | - |
| 174 | THRUST WASHER REVERSE IDLER SHAFT |
001 | A 38 726 302 62 | - |
| 177 | REVERSE IDLER GEAR | 001 | A 38 726 309 31 | - |
| 177 | REVERSE IDLER GEAR | 001 | A 38 726 314 31 | - |
| 177 | REVERSE IDLER GEAR | 001 | A 38 726 318 31 | - |
| 180 | NEEDLE BEARING REVERSE IDLER GEAR |
001 | A 01 098 151 10 | - |
| 180 | NEEDLE BEARING REVERSE IDLER GEAR |
001 | A 01 098 194 10 | - |
| 183 | BUSHING REVERSE IDLER SHAFT |
001 | A 38 726 306 50 | - |
| 183 | BUSHING REVERSE IDLER SHAFT |
001 | A 38 726 311 50 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy