WebAutoCats autoparts catalog

THREE-PART PROPELLER SHAFT

EPC / Mercedes / Truck / FH / FH 669.899 / 41 / 060

WebAutoCats Parts catalogs

‹ ›

№-	Name	A*	Part number
005	IMPORTANT INFORMATION FROM TRANSMISSION TO INTERMEDIATE BEARING I OM 602	-	Q 000000000001
005	PROPELLER SHAFT WHEELBASE: 4250,4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 58 04
006	PROPELLER SHAFT WHEELBASE: 4250,4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 03 01
008	IMPORTANT INFORMATION FROM INTERMEDIATE BEARING I TO TELMA BRAKE OM 602	-	Q 000000000001
008	PROPELLER SHAFT WHEELBASE: 4250,4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 74 04
008	PROPELLER SHAFT WHEELBASE: 4250,4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 11 02
011	IMPORTANT INFORMATION FROM TELMA BRAKE TO REAR AXLE OM 602	-	Q 000000000001
011	PROPELLER SHAFT WHEELBASE: 4250 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 99 04
011	PROPELLER SHAFT WHEELBASE: 4250 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 12 02
011	PROPELLER SHAFT WHEELBASE: 4250 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 65 04
011	PROPELLER SHAFT WHEELBASE: 4250 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 14 02
014	IMPORTANT INFORMATION FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II OM 602	-	Q 000000000001
014	PROPELLER SHAFT WHEELBASE: 4250 MM WITH 12V SYSTEM, REPLACE BULBS PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 68 04
014	PROPELLER SHAFT WHEELBASE: 4800 MM WITH 12V SYSTEM, REPLACE BULBS PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 92 04
015	PROPELLER SHAFT WHEELBASE: 4250 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 04 01
015	PROPELLER SHAFT WHEELBASE: 4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 05 01
017	LOCK AS REQUIRED 1.225 MM	001	A 009 994 04 41
017	LOCK AS REQUIRED 1.250 MM	001	A 009 994 05 41
017	LOCK AS REQUIRED 1.275 MM	001	A 009 994 06 41
017	LOCK AS REQUIRED 1.300 MM	001	A 009 994 07 41
017	LOCK AS REQUIRED 1.325 MM	001	A 009 994 08 41
017	LOCK AS REQUIRED 1.350 MM	001	A 009 994 09 41
017	LOCK AS REQUIRED 1.375 MM	001	A 009 994 10 41
017	LOCK AS REQUIRED 1.400 MM	001	A 009 994 11 41
017	LOCK AS REQUIRED 1.425 MM	001	A 009 994 12 41
017	LOCK AS REQUIRED 1.450 MM	001	A 009 994 13 41
017	LOCK AS REQUIRED 1.475 MM	001	A 009 994 14 41
017	LOCK	001	A 009 994 15 41
020	SEAL RING	001	A 381 411 01 59
023	LUBRICATING NIPPLE UNIVERSAL JOINT CROSS	002	N 071412 008102
026	PROTECTIVE CAP INTERMEDIATE SHAFT BEARING	002	A 460 411 00 96
026	PROTECTIVE CAP	002	A 670 411 00 96
027	INTERMEDIATE BEARING 22.08.2011 ANTHRACITE GREY,COLOR-NO.:RAL 7016 FRAME MOUNTED CABLE HARNESS LESS ENGINE WIRING HARNESS	002	A 670 411 01 12
029	FLANGE FLAT FLANGE	002	A 670 411 00 45
029	FLANGE FLAT FLANGE	002	A 673 410 00 45
032	PROTECTIVE CAP INTERMEDIATE SHAFT BEARING	002	A 460 411 00 96
035	HEXAGON HEAD BOLT FOLLOWER FLANGE TO PROPELLER SHAFT M12X1.5X35	002	N 308676 012014
038	THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT D=43/13 MM;S=9 MM	002	A 673 411 00 62
038	THRUST WASHER D=47/12 MM;S=9 MM	002	A 901 411 00 62
041	INTERMEDIATE BEARING PROPELLER SHAFT ONLY FOR BM 667.321/322/323/351/352/353 (OM602) FRAME MOUNTED CABLE HARNESS WITH ENGINE WIRING HARNESS USE ENGINE WIRING HARNESS AS REPLACEMENT PART SOLUTION ALSO UPTO IDENT NO.	002	A 460 410 02 22
047	HEXALOBULAR BOLT INTERMEDIATE BEARING TO BRACKET M10X16	008	N 000000 000300
047	HEXAGON HEAD BOLT INTERMEDIATE BEARING TO BRACKET M 10X1X25-10.9	008	N 910105 010022
050	NUT INTERMEDIATE BEARING TO BRACKET	008	N 913023 010004
053	IMPORTANT INFORMATION FROM INTERMEDIATE BEARING II TO REAR AXLE OM 602	-	Q 000000000001
053	PROPELLER SHAFT WHEELBASE: 4250 MM WITH 12V SYSTEM, REPLACE BULBS PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 64 04
053	PROPELLER SHAFT WHEELBASE: 4250 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 05 02
053	PROPELLER SHAFT WHEELBASE: 4800 MM WITH 12V SYSTEM, REPLACE BULBS PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 06 02
053	PROPELLER SHAFT WHEELBASE: 4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 08 02
053	PROPELLER SHAFT WHEELBASE: 4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 673 410 35 04
053	PROPELLER SHAFT WHEELBASE: 4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 670 410 16 02
056	SEAL RING PROTECTIVE TUBE	001	A 381 411 01 59
059	LUBRICATING NIPPLE PROPELLER SHAFT	003	N 071412 008102
062	IMPORTANT INFORMATION FROM TRANSMISSION TO INTERMEDIATE BEARING I OM 900/904	-	Q 000000000001
062	PROPELLER SHAFT WHEELBASE: 4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 674 410 42 04
062	PROPELLER SHAFT EXHAUST STOCK OF OLD PART NUMBER FIRST UP TO IDENT NO. N 088669 Replaced by: A 971 410 26 04	-	A 970 410 04 04
062	PROPELLER SHAFT WHEELBASE: 4800 MM ,S5-42 ;807,00 MM USED WITH REAR AXLE: 742.501 UP TO IDENT NO.: N 069683 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 971 410 26 04
062	PROPELLER SHAFT WHEELBASE: 4800 MM ,G56-6 ;728,00 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 971 410 36 04
065	IMPORTANT INFORMATION FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II OM 900/904	-	Q 000000000001
065	PROPELLER SHAFT WHEELBASE: 4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 674 410 28 04
065	PROPELLER SHAFT EXHAUST STOCK OF OLD PART NUMBER FIRST UP TO IDENT NO. N 088669 Replaced by: A 971 410 27 04	-	A 970 410 03 04
065	PROPELLER SHAFT WHEELBASE: 4800 MM , L=1198 MM USED WITH REAR AXLE: 742.501 UP TO IDENT NO.: N 069683 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 971 410 40 04	001	A 971 410 27 04
065	PROPELLER SHAFT WHEELBASE: 4800 MM L=1213 MM	001	A 971 410 40 04
065	PROPELLER SHAFT WHEELBASE: RS:4800 MM ,L=1213 MM	001	A 971 410 40 04
068	DRIVE FLANGE	001	A 381 411 14 11
068	DRIVE FLANGE	001	A 381 411 08 11
068	UNIVERSAL JOINT	002	A 971 411 01 11
071	UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31	-	A 617 410 00 31
071	UNIVERSAL JOINT CROSS WITH BUSHINGS EXHAUST STOCK OF OLD PART NUMBER FIRST UP TO IDENT NO. N 083360 9 SA 504.094 + 504.096 + 504.097 .ATTENTION "ENGINE-MODEL PLEASE REFER". USED ZF-TRANSMISSION,CODE:GF1.RELEASE BEARING,SEE TRANSMISSION	001	A 000 410 40 31
071	UNIVERSAL JOINT CROSS WITH BUSHINGS	002	A 971 410 00 31
074	GREASE NIPPLE	001	N 071412 008302
075	STOP PLUG N 87-M8X1	001	N 900087 008000
077	RETAINING RING AS REQUIRED 1.750 MM	004	N 000472 042001
077	LOCK AS REQUIRED 1.825 MM	004	A 005 994 97 41
077	LOCK AS REQUIRED 1.875 MM	004	A 005 994 99 41
077	LOCK AS REQUIRED 1.925 MM	004	A 006 994 01 41
077	LOCK AS REQUIRED 2.000 MM	004	A 006 994 04 41
080	PROTECTIVE CAP	001	A 381 413 04 61
083	FLANGE FLAT FLANGE	001	A 381 411 01 45
083	FLANGE STAGGERED TEETH EXHAUST STOCK OF OLD PART NUMBER FIRST UP TO IDENT NO. N 088669	001	A 971 411 00 45
086	PROTECTIVE CAP FOLLOWER FLANGE	001	A 381 413 04 61
086	PROTECTIVE CAP FOLLOWER FLANGE TO PROPELLER SHAFT EXHAUST STOCK OF OLD PART NUMBER FIRST UP TO IDENT NO. N 088669 Replaced by: A 971 998 00 23	002	A 971 413 00 61
086	PROTECTIVE CAP FOLLOWER FLANGE TO PROPELLER SHAFT EXHAUST STOCK OF OLD PART NUMBER FIRST UP TO IDENT NO. N 088669	002	A 971 998 00 23
089	THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT 63/16 MM;S=15 MM	001	A 383 282 02 62
092	SCREW FOLLOWER FLANGE TO PROPELLER SHAFT M 16X1.5X55X18-10.9 SW24	001	A 383 990 00 19
095	INTERMEDIATE BEARING PROPELLER SHAFT ONLY FOR BM 667.321/322/323/351/352/353 (OM602) FRAME MOUNTED CABLE HARNESS WITH ENGINE WIRING HARNESS USE ENGINE WIRING HARNESS AS REPLACEMENT PART SOLUTION ALSO UPTO IDENT NO.	001	A 381 410 15 22
098	BALL BEARING	001	A 001 981 86 25
101	RETAINING RING	002	N 000472 042001
104	PROTECTIVE CAP	002	A 381 413 05 61
107	INTERMEDIATE BEARING PROPELLER SHAFT Replaced by: A 000 411 02 12	001	A 970 411 00 12
107	ELAST.SUSPENSION PROPELLER SHAFT 22.08.2011 ANTHRACITE GREY,COLOR-NO.:RAL 7016 FRAME MOUNTED CABLE HARNESS LESS ENGINE WIRING HARNESS J.A.SCHLUETER & SOEHNE IVG AUSSCHLAEGER BILDDEICH 62-64 DE - 20539 HAMBURG MAIL: GABRIELGUASCH@SCHLUETER-SOEHNE.DE MAIL: ANDREASMAIWALD@SCHLUETER-SOEHNE.DE TEL.+49-(0)40-78816-25 FAX.+49-(0)40-78816-49 TO BE ORDERED DIRECT FROM MANUFACTURER	001	A 000 411 02 12
110	HEXALOBULAR BOLT INTERMEDIATE BEARING TO BRACKET M10X20-10.9	004	N 910143 010011
110	HEXAGON HEAD BOLT INTERMEDIATE BEARING TO BRACKET M10X35	004	N 000000 000428
113	IMPORTANT INFORMATION FROM INTERMEDIATE BEARING II TO REAR AXLE OM 900/904	-	Q 000000000001
113	PROPELLER SHAFT WHEELBASE: 4800 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART	001	A 674 410 14 02
113	PROPELLER SHAFT EXHAUST STOCK OF OLD PART NUMBER FIRST UP TO IDENT NO. N 088669 Replaced by: A 971 410 01 02	-	A 970 410 09 02
113	PROPELLER SHAFT WHEELBASE: 4800 MM USED WITH REAR AXLE: 742.501 UP TO IDENT NO.: N 069683	001	A 971 410 01 02
116	DRIVE FLANGE	002	A 381 411 14 11
116	DRIVE FLANGE	002	A 381 411 08 11
116	UNIVERSAL JOINT	002	A 971 411 01 11
119	UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31	-	A 617 410 00 31
119	UNIVERSAL JOINT CROSS WITH BUSHINGS EXHAUST STOCK OF OLD PART NUMBER FIRST UP TO IDENT NO. N 083360 9 SA 504.094 + 504.096 + 504.097 .ATTENTION "ENGINE-MODEL PLEASE REFER". USED ZF-TRANSMISSION,CODE:GF1.RELEASE BEARING,SEE TRANSMISSION	002	A 000 410 40 31
119	UNIVERSAL JOINT CROSS WITH BUSHINGS	002	A 971 410 00 31
122	GREASE NIPPLE	002	N 071412 008302
123	STOP PLUG N 87-M8X1	001	N 900087 008000
125	RETAINING RING AS REQUIRED 1.750 MM	008	N 000472 042001
125	LOCK AS REQUIRED 1.825 MM	008	A 005 994 97 41
125	LOCK AS REQUIRED 1.875 MM	008	A 005 994 99 41
125	LOCK AS REQUIRED 1.925 MM	008	A 006 994 01 41
125	LOCK AS REQUIRED 2.000 MM	008	A 006 994 04 41
128	SEAL RING PROTECTIVE TUBE 77 X 14.5 MM	001	A 381 411 05 59
128	SEAL RING PROTECTIVE TUBE 74.5 X 22 MM	001	A 381 411 07 59
131	LUBRICATING NIPPLE	001	N 071412 008102
134	SCREW PROPELLER SHAFT TO TRANSMISSION, INTERMEDIATE BEARING,AND REAR AXLE M10X1X30X17-10.9	004	A 007 990 10 01
134	HEXAGON HEAD BOLT PROPELLER SHAFT TO TRANSMISSION, INTERMEDIATE BEARING,AND REAR AXLE M10X1X30	004	N 910105 010023
134	SCREW PROPELLER SHAFT TO TRANSMISSION AND TO REAR AXLE M10X1X26X15-10.9	NB	A 353 990 00 01
137	HEXAGON NUT PROPELLER SHAFT TO TRANSMISSION, INTERMEDIATE BEARING,AND REAR AXLE	NB	N 308673 010001

To find out where to buy the item or equivalent, click on the part number.

Region: EU | GB | USA