| №- | Name | A* | Part number |
|---|---|---|---|
| 004 | CLUTCH PRESSURE PLATE INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 003 250 25 04 |
| 004 | CLUTCH PRESSURE PLATE 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 003 250 33 04 |
| 010 | SPRING SUSPENDED IN CLUTCH PRESSURE PLATE HOUSING |
003 | A 000 252 07 27 |
| 010 | SPRING SUSPENDED BELOW LEAF SPRING |
003 | A 000 252 39 27 |
| 016 | SPRING SUSPENDED IN CLUTCH PRESSURE PLATE HOUSING |
003 | A 000 252 32 27 |
| 016 | SPRING SUSPENDED BELOW LEAF SPRING |
003 | A 000 252 40 27 |
| 022 | PRESSURE PLATE INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
001 | A 000 252 04 12 |
| 022 | PRESSURE PLATE 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
001 | A 000 252 49 12 |
| 028 | RELEASE LEVER | 006 | A 000 252 46 13 |
| 034 | SPINDLE FOR RELEASE LEVERS INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
006 | A 000 252 06 16 |
| 034 | SPINDLE FOR RELEASE LEVERS 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
006 | A 000 252 22 16 |
| 040 | SPINDLE FOR BRACKETS |
006 | A 000 252 28 16 |
| 046 | ROLLER FOR BEDDING THE LEVERS IN BRACKETS |
288 | A 000 252 01 18 |
| 052 | BRACKET FOR BEDDING THE LEVERS IN CLUTCH PRESSURE PLATE |
006 | A 000 252 06 14 |
| 058 | LOCK PLATE | 006 | N 006799 007007 |
| 064 | SLEEVE | 006 | A 000 252 05 35 |
| 070 | FLANGE INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
001 | A 000 252 21 45 |
| 070 | FLANGE Replaced by: A 000 252 12 45 |
- | A 000 252 17 45 |
| 070 | FLANGE 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
001 | A 000 252 12 45 |
| 076 | PRESSURE SPRING SPRING STEEL WIRE DIA., 4.00 MM INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
024 | A 000 252 44 20 |
| 082 | PRESSURE SPRING SPRING STEEL WIRE DIA., 3.75 MM INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
006 | A 000 252 43 20 |
| 082 | PRESSURE SPRING SPRING STEEL WIRE DIA., 3.75 MM 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
027 | A 000 252 43 20 |
| 082 | PRESSURE SPRING SPRING STEEL WIRE DIA., 3.50 MM 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
009 | A 000 252 48 20 |
| 088 | LEAF SPRING THIGH SPRING SUSPENDED IN CLUTCH PRESSURE PLATE HOUSING |
006 | A 000 252 05 19 |
| 088 | LEAF SPRING THIGH SPRING SUSPENDED BELOW LEAF SPRING |
006 | A 000 252 37 19 |
| 094 | NUT | 006 | A 000 252 30 72 |
| 100 | LOCK | 006 | A 000 252 10 73 |
| 106 | SCREW | 006 | A 000 252 29 71 |
| 112 | SCREW Replaced by: N 304017 010050 |
- | N 000931 010268 |
| 112 | SCREW CLUTCH TO FLYWHEEL M 10X70 INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
012 | N 304017 010050 |
| SCREW CLUTCH M 10X80 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
012 | N 000931 010239 | |
| 118 | LOCK WASHER CLUTCH TO FLYWHEEL |
012 | N 912004 010102 |
| 124 | CLUTCH DISC ASBESTOS-FREE LINING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
001 | A 007 250 09 03 |
| 124 | CLUTCH DISC ASBESTOS-FREE LINING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 007 250 10 03 |
| 124 | CLUTCH DISC THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE Replaced by: A 006 250 45 03 |
- | A 005 250 43 03 |
| 124 | CLUTCH DISC THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE Replaced by: A 007 250 08 03 |
- | A 006 250 45 03 |
| 124 | CLUTCH DISC INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
001 | A 007 250 08 03 |
| 124 | CLUTCH DISC THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE Replaced by: A 006 250 46 03 |
- | A 005 250 64 03 |
| 124 | CLUTCH DISC INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
001 | A 006 250 46 03 |
| 124 | CLUTCH DISC ASBESTOS-FREE LINING 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 007 250 68 03 |
| 124 | CLUTCH DISC ASBESTOS-FREE LINING 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
001 | A 007 250 69 03 |
| 124 | CLUTCH DISC 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
001 | A 007 250 67 03 |
| 130 | LEAF SPRING UP TO CHASSIS 616.024-028,121,122 5 098804 616.065,131,132 5 103044 Replaced by: A 000 252 38 19 |
- | A 000 252 04 19 |
| 130 | LEAF SPRING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
008 | A 000 252 38 19 |
| 130 | LEAF SPRING UP TO CHASSIS 616.024-028,121,122 5 098804 616.065,131,132 5 103044 Replaced by: A 000 252 39 19 |
- | A 000 252 33 19 |
| 130 | LEAF SPRING 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
009 | A 000 252 39 19 |
| 136 | RIVET Replaced by: A 000 252 20 75 |
- | A 000 252 06 75 |
| 136 | RIVET LEAF SPRING TO CLUTCH DISC 5X6 MM |
018 | A 000 252 20 75 |
| 136 | RIVET LEAF SPRING TO CLUTCH DISC 6X6 MM |
018 | A 000 252 39 75 |
| 142 | CLUTCH LINING ASBESTOS-FREE INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
002 | A 001 252 32 10 |
| 142 | CLUTCH LINING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
002 | A 001 252 29 10 |
| 142 | CLUTCH LINING Replaced by: A 001 252 83 10 |
- | A 001 252 33 10 |
| 142 | CLUTCH LINING Replaced by: A 002 252 00 10 |
- | A 001 252 83 10 |
| 142 | CLUTCH LINING ASBESTOS-FREE 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
002 | A 002 252 00 10 |
| 142 | CLUTCH LINING 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
002 | A 001 252 20 10 |
| 148 | RIVET Replaced by: A 000 252 38 75 |
- | A 000 252 14 75 |
| 148 | RIVET LINING WITH INTERMEDIATE SPRING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
032 | A 000 252 38 75 |
| 148 | RIVET Replaced by: A 000 252 43 75 |
- | A 000 252 12 75 |
| 148 | RIVET LINING WITH CLUTCH DISC INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
032 | A 000 252 43 75 |
| 148 | RIVET Replaced by: A 000 252 37 75 |
- | A 000 252 33 75 |
| 148 | RIVET Replaced by: A 000 252 46 75 |
- | A 000 252 37 75 |
| 148 | RIVET Replaced by: A 000 252 48 75 |
- | A 000 252 46 75 |
| 148 | RIVET LINING WITH CLUTCH DISC AND INTERMEDIATE SPRING 10/20 UP TO IDENT NO.: 5 120370; 50/60 UP TO IDENT NO.: 5 114395 |
072 | A 000 252 48 75 |
| 154 | HOUSING Replaced by: A 620 250 11 05 |
- | A 397 250 04 05 |
| 154 | HOUSING CLUTCH TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 620 250 11 05 |
| 156 | BELL HOUSING Replaced by: A 620 251 07 01 |
- | A 620 251 06 01 |
| 156 | BELL HOUSING Replaced by: A 620 251 16 01 |
- | A 620 251 07 01 |
| 156 | BELL HOUSING TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 620 251 16 01 |
| 160 | BUSHING BOTTOM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 343 251 01 50 |
| 166 | BUSHING BOTTOM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 343 992 01 03 |
| 172 | BUSHING Replaced by: A 620 251 00 50 |
- | A 385 251 04 50 |
| 172 | BUSHING TOP TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 620 251 00 50 |
| 178 | BUSHING TOP TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 338 992 01 03 |
| 184 | SEAL RING TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 385 997 00 40 |
| 190 | SEAL RING 40X52X7 MM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 011 997 88 46 |
| 190 | SEAL RING 40X52X11 MM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 009 997 15 47 |
| 196 | COVER PLATE TOP TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 385 293 00 27 |
| SCREW PLUG BELL HOUSING TO 620 251 07 01,620 251 16 01 TO BE FILLED UP WITH SEALING MATERIAL |
001 | N 000908 020001 | |
| 202 | SHAFT Replaced by: A 385 250 00 14 |
- | A 389 250 00 14 |
| 202 | SHAFT (PARTS KIT),RELEASE SHAFT WITH 616.065 ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 385 250 00 14 |
| 204 | SHAFT (PARTS KIT),RELEASE SHAFT TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 620 250 02 14 |
| SHAFT (CLUTCH RELEASE SHAFT) TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 620 254 02 07 | |
| 206 | SCREW CLUTCH RELEASE SHAFT TO BELL HOUSING TO BE FILLED UP WITH SEALING MATERIAL |
002 | N 914112 010025 |
| 208 | WASHER AS REQUIRED 0.80 MM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 317 293 01 77 |
| 208 | WASHER AS REQUIRED 0.90 MM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 317 293 02 77 |
| 208 | WASHER AS REQUIRED 1.00 MM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 317 293 03 77 |
| 208 | WASHER AS REQUIRED 1.10 MM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 317 293 04 77 |
| 208 | WASHER AS REQUIRED 1.20 MM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 317 293 05 77 |
| 208 | WASHER AS REQUIRED 1.30 MM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 317 293 06 77 |
| 214 | SEAL RING BOTTOM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
002 | A 337 997 50 40 |
| 220 | SPACER WASHER BOTTOM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 343 293 00 52 |
| 226 | LOCK RING BOTTOM TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | N 000471 024000 |
| 232 | RELEASE LEVER TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 620 254 01 08 |
| 234 | RELEASE LEVER TO BE FILLED UP WITH SEALING MATERIAL FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 156101 Replaced by: A 620 254 05 08 |
- | A 620 254 03 08 |
| 234 | RELEASE LEVER TO BE FILLED UP WITH SEALING MATERIAL FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 190520 Replaced by: A 620 254 07 08 |
- | A 620 254 05 08 |
| 234 | RELEASE LEVER |
001 | A 620 254 07 08 |
| BEARING RELEASE LEVER |
001 | A 000 254 03 35 | |
| 235 | NEEDLE BEARING RELEASE LEVER TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 009 981 04 10 |
| 236 | SEAL RING RELEASE LEVER TO BE FILLED UP WITH SEALING MATERIAL |
002 | A 007 997 88 47 |
| 238 | SCREW Replaced by: N 304017 012002 |
- | N 000931 012251 |
| 238 | SCREW RELEASE LEVER TO SHAFT TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | N 304017 012002 |
| 244 | LOCK WASHER RELEASE LEVER TO SHAFT TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | N 912004 012100 |
| 247 | CLAMPING SLEEVE RELEASE LEVER TO SHAFT TO BE FILLED UP WITH SEALING MATERIAL |
001 | N 001481 005044 |
| 250 | PLUG Replaced by: A 620 251 03 83 |
- | A 385 251 00 83 |
| 250 | PLUG BELL HOUSING |
002 | A 620 251 03 83 |
| 256 | SCREW BELL HOUSING TO TIMING GEAR CASE |
012 | N 000931 010264 |
| 262 | LOCK WASHER BELL HOUSING TO TIMING GEAR CASE |
012 | N 912004 010102 |
| 264 | WASHER Replaced by: N 000125 010532 |
- | N 000125 010518 |
| 264 | WASHER BELL HOUSING TO TIMING GEAR CASE |
002 | N 000125 010532 |
| 268 | RELEASE BEARING TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 000 250 74 15 |
| 268 | RELEASE BEARING TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 000 250 77 15 |
| 271 | RELEASE BEARING TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 000 250 76 15 |
| 274 | SPRING RELEASE COLLAR TO RELEASE YOKE TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
002 | A 317 993 02 25 |
| 274 | SPRING RELEASE LEVER TO RELEASE BEARING TO BE FILLED UP WITH SEALING MATERIAL |
002 | A 620 993 01 25 |
| 286 | HOSE RELEASE BEARING LUBRICATION TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 385 997 05 82 |
| 286 | HOSE Replaced by: A 000 573 26 36 |
- | A 320 573 00 36 |
| 286 | HOSE RELEASE BEARING LUBRICATION TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 000 573 26 36 |
| 288 | GREASE NIPPLE (PARTS KIT) RELEASE BEARING LUBRICATION |
001 | A 620 997 02 88 |
| 290 | SCREW-IN FITTING RELEASE BEARING LUBRICATION |
002 | N 071428 004102 |
| 292 | UNION SCREW RELEASE BEARING LUBRICATION |
002 | N 003871 004102 |
| 298 | DOUBLE TAPER RING RELEASE BEARING LUBRICATION |
002 | N 003862 004001 |
| 316 | INTERMEDIATE PIECE EXHAUST STOCK OF OLD PARTS NUMBER FIRST UP TO WABCO NR.0182 Replaced by: A 620 997 00 88 |
- | A 387 251 01 08 |
| 316 | GREASE NIPPLE RELEASE BEARING LUBRICATION FROM IDENT NO. 5 596864; RETROFIT POSSIIBLE UP TO IDENT NO. 5 596863, USE 3 SCREWS 000965 006030 BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
001 | A 620 997 00 88 |
| 322 | GREASE CUP EXHAUST STOCK OF OLD PARTS NUMBER FIRST UP TO WABCO NR.0182 Replaced by: A 620 988 01 35 |
- | N 003411 002001 |
| 322 | CAP RELEASE BEARING LUBRICATION FROM IDENT NO. 5 596864; RETROFIT POSSIIBLE UP TO IDENT NO. 5 596863, USE 3 SCREWS 000965 006030 BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
001 | A 620 988 01 35 |
| 324 | LOCK WASHER RELEASE BEARING LUBRICATION |
001 | N 912004 014100 |
| 326 | NUT Replaced by: N 308675 014000 |
- | N 000936 014010 |
| 326 | NUT Replaced by: N 308675 014002 |
- | N 308675 014000 |
| 326 | NUT RELEASE BEARING LUBRICATION |
001 | N 308675 014002 |
| LEVER CLUTCH ACTUATION TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 307 295 02 28 | |
| 328 | LEVER (PARTS KIT),CLUTCH ACTUATION TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 620 290 05 34 |
| 334 | ROD END CLUTCH ACTUATION TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 000 996 64 40 |
| 334 | ROD END CLUTCH ACTUATION TO BE FILLED UP WITH SEALING MATERIAL FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 190520 |
001 | A 000 996 87 40 |
| PIN CLUTCH ACTUATION |
001 | A 620 295 02 74 | |
| 340 | PIN ROD END TO RELEASE LEVER TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 307 256 00 74 |
| 340 | PIN ROD END TO RELEASE LEVER TO BE FILLED UP WITH SEALING MATERIAL FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 190520 |
001 | A 620 256 00 74 |
| 346 | SEAL RING THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: A 001 997 21 41 |
- | A 001 997 00 41 |
| 346 | SEAL RING ROD END TO RELEASE LEVER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 190520 |
002 | A 001 997 21 41 |
| 352 | LOCK RING ROD END TO RELEASE LEVER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 190520 |
002 | N 000471 012001 |
| 358 | COVER RELEASE SHAFT,TOP TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 107925 |
001 | A 620 250 01 55 |
| 358 | WASHER TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 123718 Replaced by: A 620 254 01 76 |
- | A 385 254 05 76 |
| 358 | WASHER RELEASE SHAFT,TOP TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 5 123718 |
001 | A 620 254 01 76 |
| 364 | SEAL RING RELEASE SHAFT,TOP TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 002 997 29 48 |
| 370 | SCREW Replaced by: N 304017 010053 |
- | N 304017 010030 |
| 370 | SCREW LEVER TO RELEASE SHAFT TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | N 304017 010053 |
| 376 | LOCK WASHER LEVER TO RELEASE SHAFT TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | N 912004 010102 |
| 382 | BRACKET SLAVE CYLINDER TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 307 295 08 40 |
| 388 | SCREW Replaced by: N 304017 010002 |
- | N 000933 010129 |
| 388 | SCREW BRACKET TO BELL HOUSING TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
004 | N 304017 010002 |
| 394 | LOCK WASHER BRACKET TO BELL HOUSING TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
004 | N 912004 010102 |
| 400 | SLAVE CYLINDER Replaced by: A 001 295 53 07 |
- | A 001 295 03 07 |
| 400 | SLAVE CYLINDER Replaced by: A 001 295 88 07 |
- | A 001 295 53 07 |
| 400 | SLAVE CYLINDER Replaced by: A 002 295 04 07 |
- | A 001 295 88 07 |
| 400 | SLAVE CYLINDER CLUTCH ACTUATION TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 002 295 04 07 |
| 400 | SLAVE CYLINDER CLUTCH ACTUATION TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 001 295 44 07 |
| 406 | BOOT Replaced by: A 000 586 31 29 |
- | A 000 295 26 83 |
| 406 | BOOT FROM CHASSIS 616.024-028,121,122 5 098805 616.065,131,132 5 103045 Replaced by: A 000 295 60 83 |
- | A 000 295 48 83 |
| 406 | BOOT CLUTCH SLAVE CYLINDER TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 000 295 60 83 |
| 412 | LOCK TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
- | A 000 295 06 73 |
| 414 | VALVE Replaced by: A 307 553 01 07 |
- | A 000 431 02 65 |
| 414 | VALVE BREATHER |
001 | A 307 553 01 07 |
| 418 | PROTECTIVE CAP Replaced by: A 000 421 08 87 |
- | A 316 421 01 87 |
| 418 | PROTECTIVE CAP Replaced by: A 000 421 71 87 |
- | A 000 421 08 87 |
| 418 | PROTECTIVE CAP CLUTCH SLAVE CYLINDER |
001 | A 000 421 71 87 |
| 424 | REPAIR KIT Replaced by: A 000 290 09 11 |
- | A 000 586 31 29 |
| 424 | REPAIR KIT CLUTCH SLAVE CYLINDER TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
001 | A 000 290 09 11 |
| 424 | REPAIR KIT TO BE FILLED UP WITH SEALING MATERIAL FROM CHASSIS 616.024-028,121,122 5 098805 616.065,131,132 5 103045 Replaced by: A 000 290 40 67 |
- | A 000 290 12 67 |
| 424 | REPAIR KIT CLUTCH SLAVE CYLINDER TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 000 290 40 67 |
| 430 | SCREW Replaced by: N 304017 010002 |
- | N 000933 010129 |
| 430 | SCREW CLUTCH SLAVE CYLINDER TO BRACKET TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
002 | N 304017 010002 |
| 430 | SCREW CLUTCH SLAVE CYLINDER TO BELL HOUSING TO BE FILLED UP WITH SEALING MATERIAL |
002 | N 000933 010105 |
| 436 | LOCK WASHER CLUTCH SLAVE CYLINDER TO BRACKET |
002 | N 912004 010102 |
| 442 | SCREW Replaced by: N 308676 016015 |
- | N 000960 016112 |
| 442 | SCREW BELL HOUSING TO TRANSMISSION TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED |
006 | N 308676 016015 |
| 442 | SCREW BELL HOUSING TO TRANSMISSION TO BE FILLED UP WITH SEALING MATERIAL |
006 | N 000960 018111 |
| 448 | LOCK WASHER BELL HOUSING TO TRANSMISSION |
006 | N 912004 016101 |
| 448 | LOCK WASHER BELL HOUSING TO TRANSMISSION TO BE FILLED UP WITH SEALING MATERIAL |
006 | N 912004 018101 |
| 455 | SENDER UNIT OVERREVVING TO BE FILLED UP WITH SEALING MATERIAL |
001 | A 006 542 71 17 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy