PROPELLER SHAFT

EPC / Mercedes / Truck / FG / FG 381.113 / 41 / 001
‹ ›

№- Name A* Part number
160 PROPELLER SHAFT
WITH BOOT

Replaced by: A 674 410 22 02 		- A 383 410 10 02
160 PROPELLER SHAFT
FROM TRANSMISSION TO TRANSFER CASE 657 MM

PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART 		001 A 674 410 22 02
160 PROPELLER SHAFT
WITH BOOT

Replaced by: A 674 410 22 02 		- A 383 410 56 02
160 PROPELLER SHAFT
FROM TRANSMISSION TO TRANSFER CASE 640 MM
NOT FOR USE LESS MERCEDES-BENZ PLATFORM


EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 4 764686
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART 		001 A 674 410 22 02
162 DRIVE FLANGE
WITH BOOT
002 A 354 411 00 11
162 DRIVE FLANGE

EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 4 764686 		002 A 381 411 08 11
164 UNIVERSAL JOINT CROSS
WITH BUSHINGS
IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY

WITH BOOT
002 A 385 410 01 31
164 UNIVERSAL JOINT CROSS
Replaced by: A 000 410 40 31 		- A 617 410 00 31
164 UNIVERSAL JOINT CROSS
WITH BUSHINGS
IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY


EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 4 764686 		002 A 000 410 40 31
BEARING BUSHING 008 A 383 410 00 42
168 NEEDLE
Replaced by: A 381 981 04 87 		- A 000 981 71 87
168 NEEDLE
SET = 144 PIECES
WITH BOOT
002 A 381 981 04 87
EXPANSION PLUG 008 A 337 411 00 33
174 GREASE NIPPLE 002 N 071412 008302
176 SNAP RING
AS REQUIRED 2.80 MM
WITH BOOT
008 A 337 994 50 35
176 SNAP RING
AS REQUIRED 2.85 MM
WITH BOOT
008 A 337 994 54 35
176 SNAP RING
AS REQUIRED 2.90 MM
WITH BOOT
008 A 337 994 51 35
176 SNAP RING
AS REQUIRED 2.95 MM
WITH BOOT
008 A 337 994 52 35
176 SNAP RING
AS REQUIRED 3.00 MM
WITH BOOT
008 A 337 994 53 35
176 LOCK RING
AS REQUIRED 1.750 MM

EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 4 764686 		008 N 000472 042001
176 LOCK
AS REQUIRED 1.875 MM

EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 4 764686 		008 A 005 994 99 41
176 LOCK
AS REQUIRED 2.000 MM

EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 4 764686 		008 A 006 994 04 41
180 BOOT 001 A 381 410 01 80
181 WIRE RING 002 A 321 411 00 53
182 CLAMP
78 MM 		001 N 916002 078100
183 CLAMP
98 MM 		001 N 916002 098100
185 PROPELLER SHAFT
THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE
Replaced by: A 385 410 53 07 		- A 307 410 12 02
185 PROPELLER SHAFT
FROM TRANSFER CASE TO REAR AXLE 1250 MM

TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART 		001 A 385 410 53 07
185 PROPELLER SHAFT
THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE
FIRST EXHAUST STOCK OF OLD PARTS FROM IDENT NO. 4 389955-4 786530

Replaced by: A 385 410 51 07 		- A 307 410 13 02
185 PROPELLER SHAFT
FROM TRANSFER CASE TO REAR AXLE 1355 MM

EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 4 456943
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART 		001 A 385 410 51 07
185 PROPELLER SHAFT
FROM TRANSFER CASE TO REAR AXLE 1190 MM

UP TO IDENT NO. 4 872645;FROM IDENT NO. SEE GROUP 83
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART 		001 A 385 410 46 07
187 DRIVE FLANGE
Replaced by: A 385 411 17 11 		- A 360 411 06 11
187 DRIVE FLANGE 002 A 385 411 17 11
187 DRIVE FLANGE 002 A 385 411 17 11
189 UNIVERSAL JOINT CROSS

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.4 350131
EXHAUST STOCK OF OLD PARTS
Replaced by: A 385 410 05 31 		- A 360 410 02 31
189 UNIVERSAL JOINT CROSS
Replaced by: A 381 410 02 31 		- A 385 410 05 31
189 UNIVERSAL JOINT CROSS
Replaced by: A 973 410 00 31 		- A 381 410 02 31
189 UNIVERSAL JOINT CROSS - A 973 410 00 31
189 UNIVERSAL JOINT CROSS
Replaced by: A 973 410 00 31 		- A 381 410 02 31
189 UNIVERSAL JOINT CROSS
WITH BUSHINGS
IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY
002 A 973 410 00 31
BEARING BUSHING
Replaced by: A 385 410 08 42 		- A 385 410 02 42
BEARING BUSHING

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.4 301537

381.017 NOT FOR USE LESS MERCEDES-BENZ PLATFORM 		008 A 385 410 08 42
BEARING BUSHING

066 UP TO IDENT NO. 4 314610 		008 A 385 410 07 42
BEARING BUSHING

066 UP TO IDENT NO. 4 314610 		008 A 385 410 10 42
BEARING BUSHING

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.4 350131 		008 A 360 410 01 42
193 NEEDLE
Replaced by: A 381 981 04 87 		- A 000 981 71 87
193 NEEDLE
SET = 144 PIECES

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.4 350131 		002 A 381 981 04 87
SEAL RING

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.4 350131 		008 A 008 997 09 46
EXPANSION PLUG

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.4 350131 		008 A 360 411 02 33
197 GREASE NIPPLE 002 N 071412 008302
198 LOCK
Replaced by: A 006 994 06 41 		- A 002 994 12 41
198 LOCK
AS REQUIRED 1.65 MM 		008 A 006 994 06 41
198 LOCK
AS REQUIRED 1.70 MM 		008 A 006 994 08 41
198 LOCK RING
AS REQUIRED 1.75 MM 		008 N 000472 048000
198 LOCK
AS REQUIRED 1.80 MM 		008 A 006 994 12 41
198 LOCK
AS REQUIRED 1.85 MM 		008 A 006 994 14 41
198 LOCK
AS REQUIRED 1.90 MM 		008 A 003 994 36 41
199 PLUG 001 N 900087 008000
200 PROPELLER SHAFT
FROM TRANSFER CASE TO FRONT AXLE 1150 MM
ODER ADDITIONALLY: 676 501 00 81
001 A 381 410 07 02
200 PROPELLER SHAFT
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88

Replaced by: A 674 410 15 02 		- A 381 410 69 02
200 PROPELLER SHAFT
FROM TRANSFER CASE TO FRONT AXLE 1127 MM

UP TO IDENT NO. 4 872645;FROM IDENT NO. SEE GROUP 83
PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART 		001 A 674 410 15 02
202 DRIVE FLANGE
Replaced by: A 352 411 00 11 		- A 381 411 00 11
202 DRIVE FLANGE
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
002 A 352 411 00 11
202 DRIVE FLANGE

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.5 162440 		002 A 381 411 08 11
204 UNIVERSAL JOINT CROSS
WITH BUSHINGS
IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY

UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
002 A 385 410 02 31
204 UNIVERSAL JOINT CROSS
Replaced by: A 000 410 40 31 		- A 617 410 00 31
204 UNIVERSAL JOINT CROSS
WITH BUSHINGS
IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY


FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.5 162440 		002 A 000 410 40 31
BEARING BUSHING 008 A 322 410 05 42
208 NEEDLE
Replaced by: A 318 981 02 87 		- A 000 981 50 87
208 NEEDLE
SET = 132 PIECES
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
002 A 318 981 02 87
EXPANSION PLUG 008 A 312 411 12 33
212 GREASE NIPPLE 002 N 071412 008302
214 SNAP RING
AS REQUIRED 2.50 MM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
008 A 312 994 11 35
214 SNAP RING
AS REQUIRED 2.55 MM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
008 A 312 994 16 35
214 SNAP RING
AS REQUIRED 2.60 MM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
008 A 312 994 13 35
214 SNAP RING
AS REQUIRED 2.65 MM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
008 A 312 994 14 35
214 SNAP RING
AS REQUIRED 2.70 MM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
008 A 312 994 15 35
214 SNAP RING
AS REQUIRED 2.75 MM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
008 A 312 994 17 35
214 LOCK RING
AS REQUIRED 1.750 MM

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.5 162440 		008 N 000472 042001
214 LOCK
AS REQUIRED 1.875 MM

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.5 162440 		008 A 005 994 99 41
214 LOCK
AS REQUIRED 2.000 MM

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.5 162440 		008 A 006 994 04 41
230 BOOT

FROM IDENT NO.4 368902 ALSO INSTALLED ON:
Replaced by: A 381 410 01 80 		- A 381 410 00 80
230 BOOT
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
001 A 381 410 01 80
232 WIRE RING

381.017,018,113,114 FOR USE WITH MERCEDES-BENZ CAB;381.017 NOT FOR USE LESS MERCEDES-BENZ PLATFORM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
002 A 321 411 00 53
232 WIRE RING

EXHAUST STOCK OF OLD PARTS NUMBER FIRST UP TO CHASSIS 4 656938 		003 A 321 411 00 53
234 CLAMP
78 MM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
001 N 916002 078100
236 CLAMP
98 MM
UP TO IDENT NO. 5 143360;FROM IDENT NO.SEE GROUP 88
001 N 916002 098100
245 SCREW
Replaced by: A 360 990 30 01 		- A 360 990 19 01
245 SCREW
PROPELLER SHAFT TO TRANSFER CASE AND TO REAR AXLES 12X36 MM 		016 A 360 990 30 01
247 LOCK WASHER
PROPELLER SHAFT TO TRANSFER CASE AND TO REAR AXLES 		016 N 912004 012100
249 NUT
PROPELLER SHAFT TO TRANSFER CASE AND TO REAR AXLES 		016 N 000934 012034
260 SCREW
Replaced by: A 352 990 47 01 		- A 352 990 04 01
260 SCREW
Replaced by: A 007 990 10 01 		- A 352 990 47 01
260 SCREW
PROPELLER SHAFT TO TRANSMISSION AND TO TRANSFER CASE 10X30 MM 		016 A 007 990 10 01
260 SCREW
PROPELLER SHAFT TO TRANSFER CASE AND TO FRONT AXLE 10X30 MM 		016 A 007 990 10 01
262 LOCK WASHER
PROPELLER SHAFT TO TRANSMISSION AND TO TRANSFER CASE 		016 N 912004 010102
262 LOCK WASHER
PROPELLER SHAFT TO TRANSFER CASE AND TO FRONT AXLE 		016 N 912004 010102
264 NUT
PROPELLER SHAFT TO TRANSMISSION AND TO TRANSFER CASE 		016 N 000934 010010
264 NUT
PROPELLER SHAFT TO TRANSFER CASE AND TO FRONT AXLE 		016 N 000934 010010
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA