| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | CRANKSHAFT | 001 | A 111 030 01 01 |
| 005 | CRANKSHAFT | 001 | A 111 030 00 01 |
| 008 | PIN | 001 | A 601 997 04 10 |
| 011 | WOODRUFF KEY Replaced by: A 604 991 01 68 |
- | A 108 991 00 67 |
| 011 | KEY CRANKSHAFT GEAR AND HUB ON CRANKSHAFT |
001 | A 604 991 01 68 |
| 020 | CRANKSHAFT GEAR Replaced by: A 111 052 02 03 |
- | A 104 052 09 03 |
| 020 | CRANKSHAFT GEAR 941 12/52,22/62 000015 FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 960 12/52,22/62 043022 961 12/52,22/62 050895 ALSO INSTALLED ON 961 12/52,22/62 010464 Replaced by: A 111 052 05 03 |
- | A 111 052 02 03 |
| 020 | CRANKSHAFT GEAR 941 12/52,22/62 000016 960 12/52,22/62 043023 961 12/52,22/62 010465 |
001 | A 111 052 05 03 |
| 029 | DISC SPRING | 003 | A 127 993 00 26 |
| 032 | SCREW VIBRATION ABSORBER TO CRANKSHAFT |
001 | N 000961 018043 |
| 038 | VIBRATION ABSORBER Replaced by: A 111 030 06 03 |
- | A 111 030 03 03 |
| 038 | VIBRATION ABSORBER VIBRATION ABSORBER 941 12/52,22/62 000016 960 12/52,22/62 043023 961 12/52,22/62 010465 |
001 | A 111 030 06 03 |
| 038 | VIBRATION ABSORBER Replaced by: A 111 030 07 03 |
- | A 111 030 04 03 |
| 038 | VIBRATION ABSORBER VIBRATION ABSORBER 941 12/52,22/62 000016 960 12/52,22/62 043023 961 12/52,22/62 010465 |
001 | A 111 030 07 03 |
| 056 | RING GEAR | 001 | A 111 030 01 12 |
| RING GEAR | 001 | A 102 032 05 05 | |
| 062 | SCREW Replaced by: A 111 990 03 12 |
- | A 102 032 00 71 |
| 062 | SCREW Replaced by: A 001 990 91 12 |
- | A 111 990 03 12 |
| 062 | SCREW FOLLOWER DISC,WASHER AND FLYWHEEL TO CRANKSHAFT |
008 | A 001 990 91 12 |
| 065 | WASHER Replaced by: A 111 032 01 76 |
- | A 103 032 01 76 |
| 065 | WASHER | 002 | A 111 032 01 76 |
| 086 | CRANKSHAFT BEARING Replaced by: A 601 030 05 40 |
- | A 601 030 00 40 |
| 086 | CRANKSHAFT BEARING PARTS KIT,STANDARD 58.00 MM TO BE SELF-PREPARED; SPECIAL TOOL REQUIRED: 000 589 55 37 00 CRIMPING TOOL |
005 | A 601 030 05 40 |
| 086 | CRANKSHAFT BEARING Replaced by: A 601 030 06 40 |
- | A 601 030 01 40 |
| 086 | CRANKSHAFT BEARING PARTS KIT,REPAIR SIZE I 57.75 MM |
005 | A 601 030 06 40 |
| 086 | CRANKSHAFT BEARING Replaced by: A 601 030 07 40 |
- | A 601 030 02 40 |
| 086 | CRANKSHAFT BEARING PARTS KIT,REPAIR SIZE II 57.50 MM |
005 | A 601 030 07 40 |
| 086 | CRANKSHAFT BEARING Replaced by: A 601 030 08 40 |
- | A 601 030 03 40 |
| 086 | CRANKSHAFT BEARING PARTS KIT,REPAIR SIZE III 57.25 MM THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE |
005 | A 601 030 08 40 |
| 086 | CRANKSHAFT BEARING Replaced by: A 601 030 09 40 |
- | A 601 030 04 40 |
| 086 | CRANKSHAFT BEARING PARTS KIT,REPAIR SIZE IV 57.00 MM THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE |
005 | A 601 030 09 40 |
| 087 | CRANKSHAFT BEARING HALF LOWER;STANDARD 58.00 MM ONLY USED WITH TEMPOMAT (CRUISE CONTROL) 941 12/52,22/62 007870 960 12/52,22/62 067723 961 12/52,22/62 034372 |
005 | A 601 033 22 02 |
| 089 | GUARD PLATE PARTS KIT 2.15 MM |
002 | A 601 030 00 62 |
| 089 | GUARD PLATE PARTS KIT 2.20 MM |
002 | A 601 030 01 62 |
| 089 | GUARD PLATE PARTS KIT 2.25 MM |
002 | A 601 030 02 62 |
| 089 | GUARD PLATE PARTS KIT 2.35 MM |
002 | A 601 030 03 62 |
| 089 | GUARD PLATE PARTS KIT 2.40 MM |
002 | A 601 030 04 62 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy