| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | VIBRATION DAMPER PROPELLER SHAFT TO TRANSMISSION FROM IDENT NO. 941506; P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 611 411 00 47 |
| 010 | PROPELLER SHAFT WITH BEARING,FRONT 668 MM FROM IDENT NO. 941506; P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 611 410 55 01 |
| 010 | PROPELLER SHAFT TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED USED WITH 3050 MM WHEELBASE FROM CHASSIS 622908 USED WITH 3350 MM WHEELBASE FROM CHASSIS 623314 USED WITH 3700 MM WHEELBASE FROM CHASSIS 624245 Replaced by: A 611 410 75 01 |
- | A 611 410 36 01 |
| 010 | PROPELLER SHAFT WITH BEARING,FRONT 683 MM UP TO IDENT NO.941505 EXCEPT FOR 899081-941503 ONLY WITH OM 615/OM 616/OM 617 ENGINE; SEE ENGINE MICROFICHE USED WITH 3050 MM WHEELBASE FROM CHASSIS 500001-622907 USED WITH 3350 MM WHEELBASE FROM CHASSIS 500001-623313 USED WITH 3700 MM WHEELBASE FROM CHASSIS 500001-624244 UP TO IDENT NO. 763828 EXCEPT FOR 762813 UP TO IDENT NO. 831841 WHEELBASE: 3050 MM FROM IDENT NO.: 655871-690172 NOT FOR USE WITH FRONT AXLE 730.403 |
001 | A 611 410 75 01 |
| 010 | PROPELLER SHAFT WITH BEARING,FRONT 690 MM EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 695501 FROM IDENT NO. 831842 WHEELBASE: 3050 MM FROM IDENT NO.941506, P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 611 410 04 17 |
| 010 | PROPELLER SHAFT WITH BEARING,FRONT 683 MM |
001 | A 611 410 08 17 |
| 010 | PROPELLER SHAFT WITH BEARING,FRONT 683 MM |
001 | A 611 410 11 17 |
| 020 | LUBRICATING NIPPLE | 001 | N 071412 006101 |
| 030 | WASHER INTERMEDIATE SHAFT BEARING |
001 | A 601 411 00 76 |
| 040 | PROTECTIVE CAP INTERMEDIATE SHAFT BEARING |
002 | A 601 411 03 96 |
| 050 | RETAINING RING INTERMEDIATE SHAFT BEARING |
001 | N 900055 045200 |
| 060 | SEAL RING INTERMEDIATE SHAFT BEARING FROM IDENT NO.941506, P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 601 411 00 59 |
| 070 | SEAL HOLDER INTERMEDIATE SHAFT BEARING FROM IDENT NO.941506, P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 601 411 00 58 |
| 080 | REPAIR KIT Replaced by: A 601 410 21 10 |
- | A 601 410 17 10 |
| 080 | INTERMEDIATE BEARING INTERMEDIATE BEARING |
001 | A 601 410 21 10 |
| 090 | PROPELLER SHAFT TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED USED WITH 3050 MM WHEELBASE FROM CHASSIS 622908 USED WITH 3350 MM WHEELBASE FROM CHASSIS 623314 USED WITH 3700 MM WHEELBASE FROM CHASSIS 624245 Replaced by: A 611 410 09 02 |
- | A 611 410 01 02 |
| 090 | PROPELLER SHAFT REAR FROM IDENT NO. 941506; P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE UP TO IDENT NO. 941505 EXCEPT FOR 899081-941503 ONLY WITH OM601/OM602 ENGINE FROM IDENT NO.941506, P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 611 410 09 02 |
| 090 | PROPELLER SHAFT REAR |
001 | A 611 410 16 02 |
| 090 | PROPELLER SHAFT REAR |
001 | A 611 410 19 02 |
| 090 | PROPELLER SHAFT TO BE ORDERED ONLY ON COMMISSION AND INDICATING ALSO ALL THE VEHICLE DATA REQUIRED USED WITH 3050 MM WHEELBASE FROM CHASSIS 622908 USED WITH 3350 MM WHEELBASE FROM CHASSIS 623314 USED WITH 3700 MM WHEELBASE FROM CHASSIS 624245 Replaced by: A 611 410 12 02 |
- | A 611 410 04 02 |
| 090 | PROPELLER SHAFT REAR UP TO IDENT NO.941505 EXCEPT FOR 899081-941503 ONLY WITH OM 615/OM 616/OM 617 ENGINE; SEE ENGINE MICROFICHE USED WITH 3050 MM WHEELBASE FROM CHASSIS 500001-622907 USED WITH 3350 MM WHEELBASE FROM CHASSIS 500001-623313 USED WITH 3700 MM WHEELBASE FROM CHASSIS 500001-624244 EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.824407 899081-941503 ONLY WITH OM601/OM602 ENGINE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 611 410 12 02 |
| 100 | BOOT Replaced by: A 601 411 01 97 |
- | A 601 410 00 80 |
| 100 | BOOT SLIP JOINT FROM IDENT NO.941506, P 000001 ALSO INSTALLED ON 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 601 411 01 97 |
| 100 | BOOT SLIP JOINT ONLY USED WITH BUMPERS HAVING ADDITIONAL LOUVERS 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 901 411 00 97 |
| 110 | LOOM TIE Replaced by: A 004 997 23 90 |
- | A 003 997 16 90 |
| 110 | LOOM TIE BOOT TO PROPELLER SHAFT 50.0 MM |
002 | A 004 997 23 90 |
| 110 | LOOM TIE Replaced by: A 005 997 11 90 |
- | A 004 997 22 90 |
| 110 | LOOM TIE BOOT TO PROPELLER SHAFT 56.0 MM ONLY USED WITH BUMPERS HAVING ADDITIONAL LOUVERS 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 005 997 11 90 |
| 115 | VIBRATION DAMPER PROPELLER SHAFT TO REAR AXLE UP TO IDENT NO.941505 EXCEPT FOR 899081-941503 ONLY WITH OM 615/OM 616/OM 617 ENGINE; SEE ENGINE MICROFICHE USED WITH 3050 MM WHEELBASE FROM CHASSIS 500001-622907 USED WITH 3350 MM WHEELBASE FROM CHASSIS 500001-623313 USED WITH 3700 MM WHEELBASE FROM CHASSIS 500001-624244 EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.824407 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 611 411 02 47 |
| 115 | VIBRATION DAMPER PROPELLER SHAFT TO REAR AXLE EXHAUST STOCK OF OLD PART NUMBERS FIRST FROM IDENT NO. 764516 - 799417, P 000001 899081-941503 ONLY WITH OM601/OM602 ENGINE |
001 | A 611 411 05 47 |
| 120 | SCREW TO MOUNT THE PROPELLER SHAFTS M 10X23 |
NB | A 309 990 18 01 |
| 120 | SCREW TO MOUNT THE PROPELLER SHAFTS M 10X31 (SA 43552) |
NB | A 309 990 16 01 |
| 130 | SPRING LOCK WASHER PROPELLER SHAFT TO TRANSMISSION AND TO REAR AXLE ALSO FOR USE AFTER INSTALLATION OF REPAIR SOLUTION |
012 | N 912004 010102 |
| 140 | NUT Replaced by: A 003 990 30 51 |
- | N 070615 010008 |
| 140 | NUT PROPELLER SHAFT TO TRANSMISSION AND TO REAR AXLE |
012 | A 003 990 30 51 |
| 150 | PLATE INTERMEDIATE BEARING TO FRAME |
001 | A 601 410 00 25 |
| 160 | SCREW INTERMEDIATE BEARING TO FRAME |
002 | N 000961 012122 |
| 170 | SPRING LOCK WASHER INTERMEDIATE BEARING TO FRAME |
002 | N 912004 012100 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy