| №- | Name | A* | Part number | A |
|---|---|---|---|---|
| 010 | FUEL TANK | 001 | A 21 247 073 01 | - |
| 010 | FUEL TANK | 001 | A 21 247 075 01 | - |
| 010 | FUEL TANK | 001 | A 21 247 005 00 | - |
| 020 | BRACKET ATTACHMENT OF VENT LINE |
001 | A 21 247 500 40 | - |
| 030 | PRESSURE SENSOR | 001 | A 16 354 228 18 | - |
| 040 | ELECTRICAL WIRING HARNESS TANK PRESSURE SENSOR ADAPTER LINE |
001 | A 21 244 022 32 | - |
| 050 | FUEL DELIVERY MODULE IN TANK AT RIGHT WITHOUT FUEL LINES |
001 | A 21 847 004 94 | - |
| 060 | SENDER UNIT IN RIGHT TANK |
001 | A 20 454 007 17 | - |
| 100 | SUCTION JET PUMP IN TANK AT LEFT WITH LINES |
001 | A 21 847 005 94 | - |
| 110 | SENDER UNIT IN LEFT TANK |
001 | A 20 454 009 17 | - |
| 120 | PRESSURE SENSOR FUEL PUMP |
001 | A 00 090 511 00 | - |
| 130 | O-RING FEED UNIT AND PUMP TO TANK 135.5X6 |
002 | A 02 599 718 45 | - |
| 130 | O-RING FEED UNIT AND PUMP TO TANK |
002 | A 01 499 789 45 | - |
| 140 | BAYONET TYPE CAP FEED UNIT AND PUMP TO TANK |
002 | A 00 147 114 30 | - |
| 160 | FILLER CAP | 001 | A 22 147 007 05 | - |
| 160 | FILLER CAP | 001 | A 22 147 006 05 | - |
| 170 | SEAL RING FILLER CAP TO FILLER NECK Replaced by: A 000 476 00 00 |
001 | A 16 847 104 79 | - |
| 170 | PROFILE SEAL FILLER CAP TO FILLER NECK |
001 | A 00 047 600 00 | - |
| 170 | SEAL RING FILLER CAP TO FILLER NECK |
001 | A 16 847 106 79 | - |
| 180 | EXPANSION RIVET TANK LOCK FASTENING 5.2 MM |
001 | A 00 199 023 92 | - |
| 200 | FEED-THROUGH GROMMET SEAL FILLER NECK |
001 | A 21 899 800 01 | - |
| 250 | RETAINING STRAP TANK TO BODYSHELL |
002 | A 21 247 002 40 | - |
| 250 | RETAINING STRAP TANK TO BODYSHELL |
002 | A 21 247 001 40 | - |
| 260 | EXPANSION RIVET ATTACHMENT STRAP |
004 | A 00 099 176 40 | - |
| 270 | COMBINATION NUT FRONT FASTENING M8 |
002 | A 00 499 033 50 | - |
| 280 | COMBINATION NUT REAR FASTENING M8 |
002 | A 00 499 033 50 | - |
| 300 | BOLT FILLER NECK TO BODY, BOTTOM M8X35 |
001 | A 00 099 096 03 | - |
| 310 | WASHER FILLER NECK TO BODY, BOTTOM |
001 | A 00 399 014 82 | - |
| 330 | EXTERNAL HEXAL. HD. BOLT FILLER NECK TO BODY, TOP |
001 | A 00 199 054 03 | - |
| 340 | GASKET BETWEEN TANK LOCKING BASE AND VEHICLE SHELL |
001 | A 21 247 600 80 | - |
| 360 | MOUNTING PLATE BETWEEN FUEL TANK AND CHASSIS |
001 | A 20 447 501 85 | - |
| 370 | COMBINATION NUT REAR FASTENING M8 |
002 | A 00 499 033 50 | - |
| 450 | PAD ON TANK |
002 | A 21 247 501 20 | - |
| 900 | CLUTCH PLUG CONNECTION FOR FUEL PUMP WIRING HARNESS 7-PIN SLK2.8, MLK1.2;X36/2*1 |
001 | A 17 154 501 28 | - |
| 905 | CLUTCH CONNECTOR, TANK (PRESSURE SENSOR) 3-PIN MQS;X25/4 |
001 | A 21 054 021 81 | - |
| 910 | CLUTCH FUEL PRESSURE SENSOR 3-PIN MLK1.2;B4/7*1 |
001 | A 21 154 517 28 | - |
| 915 | COUPLING HOUSING PLUG CONNECTION FOR FUEL PUMP WIRING HARNESS 3-PIN MLK1.2;X36/3*1 |
001 | A 21 154 527 28 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy