REAR AXLE

EPC / Mercedes / 1 / FG / FG 189.000 / 35 / 029
‹ ›

№- Name A* Part number A

REAR AXLE TUBE 		- XXX XXX XXX XXXX -
045 REAR AXLE
TUBE, LEFT, WITH PIVOT PIN 		001 A 18 835 009 19  -
046 REAR AXLE
TUBE, RIGHT, WITH PIVOT PIN 		001 A 18 835 014 19  -
047 BUSHING
FOR FORKET FITTING AT REAR AXLE TUBE FOR REAR AXLE TUBE, RIGHT 		002 A 18 835 700 50  -
47a TAPERED PLUG
ASM 10X1 N 87 FOR REAR AXLE TUBE, RIGHT 		001 -
048 PIVOT PIN
FOR THRUST ARM 		002 A 18 835 000 55  -
049 JACKET
FOR SLEEVE FOR REAR AXLE TUBE, RIGHT 		001 A 18 835 700 53  -
050 GROOVED PIN
4X12 DIN 1474 MS FOR REAR AXLE TUBE, RIGHT 		001 -
051 PIN
FOR SHOCK ABSORBER AT REAR AXLE TUBE 		002 A 18 632 615 74  -
052 STUD BOLT
M 14X1,5X48 KR 591 IN REAR AXLE TUBE FOR SPRING CLAMP 		002 -
053 SCREW PLUG
FOR OIL FILLER 		001 A 18 699 700 32  -
054 BREATHER
FOR REAR AXLE TUBE, LEFT 		001 A 18 035 002 90  -

SLIDING JOINT 		- XXX XXX XXX XXXX -
055 SLIDING JOINT 001 A 19 835 000 13  -
056 WASHER
IN JOKE 		001 A 18 835 700 52  -
56a WASHER
IN JOKE 		001 A 18 035 701 52  -
057 LOCKING RING
48X1,75 DIN 472 IN JOKE UP TO REAR AXLE 8501135 		002 -
057 LOCKING RING
48X1,75 DIN 472 IN JOKE FROM REAR AXLE 8501136 		001 -
LOCKING RING
IN JOKE FROM REAR AXLE 8501136 		001 A 00 099 429 41  -
058 UNIVERSAL CROSS 001 A 18 835 700 13  -
059 NEEDLE BEARING BUSHING 004 A 18 635 700 14  -
REPLACED BY
2,5X13,8 II DIN 5402 2,5X13,8 DIN 617 		- -
060 NEEDLE
2,5X13,8 II DIN 5402 		112 -
061 SNAP RING 2.25 MM THICK
OPTIONAL, AS REQUIRED 		004 A 18 699 404 35  -
SNAP RING 2.15 MM THICK
OPTIONAL, AS REQUIRED 		004 A 18 699 412 35  -
SNAP RING 2.35 MM THICK
OPTIONAL, AS REQUIRED 		004 A 18 699 415 35  -
SNAP RING 2.45 MM THICK
OPTIONAL, AS REQUIRED 		004 A 18 699 417 35  -
SNAP RING 2.55 MM THICK
OPTIONAL, AS REQUIRED 		004 A 18 699 419 35  -
062 SLIDING SLEEVE 001 A 19 835 001 13  -
063 LOCKING RING 002 A 18 899 400 41  -
064 CYLINDR. ROLLER 4 X 4 108 A 18 098 100 86  -
065 RUBBER SLEEVE 001 A 18 835 700 91  -
066 HEX.-HD. SOCKET SCREW
M 10X85 DIN 912-8 G FOR JOINT FORK AT REAR AXLE SIDE GEAR 		001 -
067 LOCK WASHER
B 10 DIN 127 FOR JOINT FORK AT REAR AXLE SIDE GEAR 		001 -
068 SHIM 1.60 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 301 52  -
SHIM 1.70 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 303 52  -
SHIM 1.80 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 305 52  -
SHIM 1.90 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 307 52  -
SHIM 2.00 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 309 52  -
SHIM 2.10 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 311 52  -
SHIM 2.20 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 313 52  -
SHIM 2.30 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 315 52  -
SHIM 2.40 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 317 52  -
SHIM 2.50 MM THICK
OPTIONAL FOR JOINT FORK, INSIDE 		001 A 18 835 319 52  -

REAR AXLE SHAFT 		- XXX XXX XXX XXXX -
070 REAR AXLE SHAFT, LEFT 001 A 18 835 011 10  -
071 WHEEL MOUNTING PIN 005 A 18 340 101 71  -
072 REAR AXLE SHAFT, RIGHT 001 A 18 835 020 10  -
073 WHEEL MOUNTING PIN 005 A 18 340 101 71  -
73a LOCKING PIN 001 A 18 035 700 74  -
73b PRESSURE SPRING 001 A 18 099 331 01  -
73c LOCKING WASHER
3,2 DIN 6799 		001 -
074 GROOVED BEARING
6308 C 4 DIN 625 FOR REAR AXLE SHAFT 		002 -
075 LOCKING WASHER
FOR REAR AXLE SHAFT 		002 A 18 335 303 73  -
076 GROOVED NUT
FOR REAR AXLE SHAFT 		002 A 15 335 700 26  -
077 HEX.-HD. SCREW
M 12X25 DIN 933-8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING 		004 -
078 HEX.-HD. SCREW
M 8X22 DIN 933-8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING 		007 -
HOSE CLAMP
S 9 N 262 FOR RUBBER SLEEVE AT REAR AXLE TUBE AND REAR AXLE HOUSING 		002 -
HOSE STRAP
9X0,4 N 263 FOR RUBBER SLEEVE AT REAR AXLE TUBE AND REAR AXLE HOUSING ORDER BY THE METER 		NB -
AL-FIN BRAKE DRUM
Replaced by: A  189 420 00 05 		- A 19 842 002 05  -
081 AL-FIN BRAKE DRUM 002 A 18 942 000 05  -
082 SPH. COLLAR NUT M 14X1,5
SEE ALSO GROUPS 33 AND 40 		004 A 13 699 000 59  -
083 CONNECTION FITTING
M 8X1X16 DIN 71428 FOR LUBE OIL PIPE AT FORKED FITTING, REAR AXLE TUBE, RIGHT 		002 -
084 SEALING RING
A 8X12 DIN 7603 AL FOR LUBE OIL PIPE AT FORKED FITTING, REAR AXLE TUBE, RIGHT 		002 -

REAR AXLE SUSPENSION 		- XXX XXX XXX XXXX -
085 CONNECTING PIN 001 A 18 835 002 55  -
086 CASTLE NUT
M 20X1,5 DIN 935-5 S FOR REAR AXLE AT FRAME 		001 -
087 COTTER PIN
4X40 DIN 94 FOR REAR AXLE AT FRAME 		001 -
088 MOUNTING SUPPORT 001 A 18 835 006 32  -
089 LOCK WASHER
B 10 DIN 127 FOR MOUNTING SUPPORT AT FRAME 		004 -
090 HEX.-HD. SCREW
M 10 X 30 DIN 933-8 G FOR MOUNTING SUPPORT AT FRAME 		004 -
091 PIN
FOR THRUST ARM AT FRAME 		002 A 18 635 202 74  -
092 WASHER
19 DIN 433 FOR THRUST ARM AT FRAME 		002 -
093 CASTLE
M 18X1,5 DIN 937-5 S FOR THRUST ARM AT FRAME 		002 -
094 COTTER PIN
4X35 DIN 94 FOR THRUST ARM AT FRAME 		002 -
095 TIGHTENING PLATE
FOR RUBBER MOUNTING, SCREW SIDE 		002 A 18 835 201 76  -
096 LOCKING PLATE 002 A 18 899 400 12  -
097 HEX.-HD. SCREW 002 A 18 835 200 71  -
099 RUBBER MOUNTING 002 A 18 835 101 48  -
REPLACED BY
189 351 00 86 TOGETHER WITH 2 WASHER 189 351 00 52 UP TO REAR AXLE 002851 		- A 18 635 100 86  -
100 RUBBER RING
ON RUBBER MOUNTING FROM REAR AXLE 002852 		004 A 18 935 100 86  -
101 MOUNTING BODY
FOR REAR AXLE SUSPENSION 		001 A 18 835 004 32  -
WASHER
VALID ONLY FOR RUBBER RING 186 351 00 86
Replaced by: A  189 351 00 52 		- A 13 635 313 62  -
102 WASHER 002 A 18 935 100 52  -
103 LOCKING WASHER 001 A 18 835 100 73  -
104 GROOVED NUT
M 35X1,5 DIN 70852 		001 -
105 PIN
FOR REAR AXLE AT FRAME 		001 A 18 835 101 74  -
106 WEDGE-TYPE SCREW 001 A 18 899 000 35  -
107 LOCK WASHER
B 8 DIN 127 		001 -
108 HEX. NUT
M 8 DIN 934-5 S 		001 -
109 THRUST ARM 002 A 18 635 002 29  -
110 RUBBER MOUNTING 002 A 00 035 201 65  -
111 TIGHTENING PLATE
FOR RUBBER MOUNTING, WHEEL SIDE FOR THRUST ARM AT REAR AXLE TUBE 		002 A 18 835 200 76  -
112 RUBBER MOUNTING
FOR THRUST ARM AT REAR AXLE TUBE 		004 A 18 835 200 65  -
113 SHIM 1.9 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INNER, AND REAR AXLE TUBE, OUTER, AND WASHER 		004 A 18 835 108 52  -
SHIM 2.0 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INNER, AND REAR AXLE TUBE, OUTER, AND WASHER 		004 A 18 835 109 52  -
SHIM 2.1 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INNER, AND REAR AXLE TUBE, OUTER, AND WASHER 		004 A 18 835 110 52  -
SHIM 2.2 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INNER, AND REAR AXLE TUBE, OUTER, AND WASHER 		004 A 18 835 111 52  -
SHIM 2.3 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INNER, AND REAR AXLE TUBE, OUTER, AND WASHER REPAIR DESIGN 		004 A 18 835 112 52  -
SHIM 2.4 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INNER, AND REAR AXLE TUBE, OUTER, AND WASHER REPAIR DESIGN 		004 A 18 835 113 52  -
SHIM 2.5 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INNER, AND REAR AXLE TUBE, OUTER, AND WASHER REPAIR DESIGN 		004 A 18 835 114 52  -
SHIM 3.0 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INNER, AND REAR AXLE TUBE, OUTER, AND WASHER REPAIR DESIGN 		004 A 18 835 115 52  -
114 WASHER
ON CONNECTION PIN AT REAR AXLE TUBE MOUNTING, OUTSIDE 		002 A 18 835 100 51  -
115 RUBBER RING
OVER SHIMS 		004 A 18 835 100 86  -
116 MOUNTING SLEEVE
FOR FRONT RUBBER MOUNTING 		001 A 18 835 103 53  -
117 SLEEVE 002 A 18 835 100 53  -
118 RING HALF 002 A 18 835 101 51  -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA