| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | WHEEL HOUSE LEFT Replaced by: A 246 620 19 00 |
001 | A 246 620 07 61 |
| 010 | WHEEL HOUSE LEFT |
001 | A 246 620 19 00 |
| 020 | LONGITUDINAL MEMBER INSIDE LEFT |
001 | A 246 620 23 34 |
| 030 | LONGITUDINAL MEMBER OUTSIDE LEFT |
001 | A 246 620 21 34 |
| 040 | CROSS MEMBER LONGITUDINAL MEMBER, TOP, LEFT |
001 | A 246 620 29 30 |
| 050 | LONGITUDINAL MEMBER TOP INSIDE,LEFT |
001 | A 246 630 09 00 |
| 100 | WHEEL HOUSE RIGHT Replaced by: A 246 620 20 00 |
001 | A 246 620 08 61 |
| 100 | WHEEL HOUSE RIGHT |
001 | A 246 620 20 00 |
| 110 | LONGITUDINAL MEMBER INSIDE RIGHT |
001 | A 246 620 24 34 |
| 120 | LONGITUDINAL MEMBER OUTSIDE RIGHT |
001 | A 246 620 26 34 |
| 140 | CROSS MEMBER LONGITUDINAL MEMBER, TOP, RIGHT |
001 | A 246 620 30 30 |
| 150 | LONGITUDINAL MEMBER TOP INSIDE,RIGHT |
001 | A 246 630 10 00 |
| 300 | INTEGRAL CARRIER OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== Replaced by: A 246 620 12 00 |
001 | A 246 620 00 87 |
| 300 | INTEGRAL CARRIER IMPORTANT: ALSO ORDER ACCEL. PEDAL COVER ADAPT WIRING HARNESS FOR ASSEMBLY SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== ALSO ORDER: 1 X A 607 141 00 51 COMPENSATING RING, TURBOCHARGER CONNECTION FITTING FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. |
001 | A 246 620 12 00 |
| 310 | THREAD FORMING SCREW FRONT FRAME-TYPE INTEGRAL SUPPORT |
002 | A 000 990 57 11 |
| 320 | HEX. HD. BOLT W FLANGE REAR FRAME-TYPE INTEGRAL SUPPORT M8X24 |
006 | A 000 990 80 11 |
| 330 | FIXTURE REAR |
001 | A 246 626 05 05 |
| 800 | BOLT REPAIR SOLUTION FOR RUPTURED WELDED PINS |
NB | A 000 990 12 10 |
| 810 | BLIND RIVET REPAIR SOLUTION FOR RUPTURED WELDED PINS 6,4 X 12MM / 1-3,5MM NO LONGER AVAILABLE RIVET IS ONLY VALID FOR MODEL SERIES 222. FOR REPAIR INFORMATION SEE WIS. ADDITIONAL INFORMATION VIA TECHNICAL MARKET SUPPORT. |
NB | A 000 991 76 32 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy