REAR AXLE

EPC / Mercedes / 1 / FG / FG 128.010 / 35 / 022
‹ ›

№- Name A* Part number A

REAR AXLE TUBE 		- XXX XXX XXX XXXX -
045 REAR AXLE
TUBE, LEFT, WITH SUPPORTING TUBE 		001 A 18 035 044 19  -
046 REAR AXLE
TUBE, RIGHT, WITH PIVOT PIN 		001 A 18 035 039 19  -
047 BUSHING
FOR REAR AXLE TUBE, RIGHT 		002 A 18 035 101 50  -
048 SCREW PLUG
FOR OIL FILLER AT REAR AXLE TUBE, LEFT 		001 A 18 699 700 32  -
049 BREATHER
FOR REAR AXLE TUBE 		001 A 18 035 002 90  -

UNIVERSAL JOINT, SLIDING 		- XXX XXX XXX XXXX -
053 UNIVERSAL JOINT, SLIDING 001 A 18 035 005 13  -
054 WASHER
IN JOINT YOKE 		001 A 18 035 701 52  -
055 LOCKING RING
IN JOINT YOKE 		001 A 00 099 429 41  -
056 SLIDING SLEEVE
WITH GUIDE PLATE IN JOINT YOKE 		001 A 18 035 007 13  -
LOCKING RING
32X1,5 DIN 471 IN JOINT YOKE 		002 -
057 CYLINDR. ROLLER
IN JOINT YOKE 		132 A 18 098 100 86  -
058 WASHER
IN JOINT YOKE 		001 A 18 835 700 52  -
LOCKING RING
48X1,75 DIN 472 IN JOINT YOKE 		001 -
060 UNIVERSAL CROSS 001 A 18 035 700 13  -
061 NEEDLE BEARING BUSHING 004 A 12 035 701 14  -
NEEDLE
2,5X11,8 II DIN 5402 		100 -
062 SNAP RING, 2.25 MM THICK
OPTIONAL 		NB A 12 099 401 35  -
SNAP RING 2.35 MM THICK
OPTIONAL 		NB A 12 099 404 35  -
SNAP RING 2.40 MM THICK
OPTIONAL 		NB A 12 099 406 35  -
SNAP RING 2.45 MM THICK
OPTIONAL 		NB A 12 099 407 35  -
SNAP RING 2.55 MM THICK
OPTIONAL 		NB A 12 099 408 35  -
064 TIGHTENING SCREW
FOR JOINT YOKE, INSIDE 		001 A 18 035 300 76  -
LOCK WASHER
B 10 DIN 127 FOR JOINT YOKE, INSIDE 		001 -
066 SHIM, 1.0 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 330 52  -
SHIM, 1.1 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 331 52  -
SHIM, 1.2 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 333 52  -
SHIM, 1.3 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 335 52  -
SHIM, 1.4 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 337 52  -
SHIM, 1.5 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 339 52  -
SHIM, 1.6 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 341 52  -
SHIM, 1.7 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 343 52  -
SHIM, 1.8 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 345 52  -
SHIM, 1.9 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 347 52  -
SHIM, 2.0 MM THICK
OPTIONAL FOR JOINT YOKE, INSIDE 		001 A 18 035 349 52  -
RUBBER BOOT
Replaced by: A  110 357 01 91 		- A 18 035 705 91  -
068 RUBBER BOOT 001 A 11 035 701 91  -

REAR AXLE SHAFT 		- XXX XXX XXX XXXX -
070 REAR AXLE SHAFT, LEFT 001 A 18 035 013 10  -
071 WHEEL FIXING PIN 005 A 12 040 101 71  -
072 REAR AXLE SHAFT, RIGHT 001 A 18 035 014 10  -
073 WHEEL FIXING PIN 005 A 12 040 101 71  -
074 GROOVED BEARING
FOR REAR AXLE SHAFT 		002 A 18 398 100 25  -
075 LOCKING WASHER
FOR REAR AXLE SHAFT 		002 A 18 335 303 73  -
076 GROOVED NUT
FOR REAR AXLE SHAFT 		002 A 15 335 700 26  -
HEX.-HD. SCREW
M 10X22 DIN 933-8 G FOR REAR AXLE TUBE TO REAR AXLE HOUSING 		004 -
HEX.-HD. SCREW
M 7X22 DIN 933-8 G FOR REAR AXLE TUBE TO REAR AXLE HOUSING 		004 -
HOSE CLAMP
S 9 N 262 FOR RUBBER BOOT TO REAR AXLE 		002 -
HOSE STRAP
9X0,4 N 263 FOR RUBBER BOOT TO REAR AXLE ORDER BY THE METER 		NB -
081 BRAKE DRUM 002 A 18 042 108 01  -
SPHERICAL COLLAR NUT
FOR BRAKE DRUM TO WHEEL BOLT, REAR WHEEL HUB
Replaced by: A  110 990 00 59 		- A 12 099 000 59  -
082 SPHERICAL COLLAR NUT
FOR BRAKE DRUM TO WHEEL BOLT, REAR WHEEL HUB ALSO SEE GROUPS 33 AND 40 		004 A 11 099 000 59  -

REAR AXLE SUSPENSION 		- XXX XXX XXX XXXX -
085 CONNECTION PIN
FOR REAR AXLE SUSPENSION 		001 A 18 035 106 74  -
086 SLEEVE, 26.0 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN 		002 A 18 035 101 53  -
SLEEVE, 25.8 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIR DESIGN 		002 A 18 035 118 53  -
SLEEVE, 25.6 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIR DESIGN 		002 A 18 035 117 53  -
SLEEVE, 25.4 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIR DESIGN 		002 A 18 035 116 53  -
SLEEVE, 25.2 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIR DESIGN 		002 A 18 035 115 53  -
SLEEVE, 25.0 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIR DESIGN 		002 A 18 035 114 53  -
087 SHIM, 2.0 MM THICK
FOR REAR AXLE TUBE, OUTSIDE 		002 A 18 035 114 52  -
088 SHIM, 1.9 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002 A 18 035 113 52  -
SHIM, 2.0 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002 A 18 035 114 52  -
SHIM, 2.1 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002 A 18 035 115 52  -
SHIM, 2.2 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE 		002 A 18 035 116 52  -
SHIM, 2.3 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 117 52  -
SHIM, 2.4 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 118 52  -
SHIM, 2.5 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 119 52  -
SHIM, 2.6 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 127 52  -
SHIM, 2.7 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 128 52  -
SHIM, 2.8 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 129 52  -
SHIM, 2.9 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 130 52  -
SHIM, 3.0 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 120 52  -
SHIM, 3.1 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 131 52  -
SHIM, 3.2 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING, INSIDE REPAIR DESIGN 		002 A 18 035 132 52  -
089 SHIM
ON CONNECTION PIN AT REAR AXLE TUBE MOUNTING, OUTSIDE 		002 A 18 035 103 51  -
090 RUBBER RING
OVER SHIMS 		004 A 18 035 109 86  -
091 KEY
FOR CONNECTION PIN TO REAR AXLE HOUSING 		001 A 18 035 100 74  -
LOCK WASHER
B 8 DIN 127 FOR CONNECTION PIN TO REAR AXLE HOUSING 		001 -
HEX. NUT
M 8 DIN 934-5 S FOR CONNECTION PIN TO REAR AXLE HOUSING 		001 -
094 LOCKING RING
IN CONNECTION PIN 		001 A 18 099 403 41  -
COVER
20 DIN 443 IN CONNECTION PIN 		001 -
096 SPACER SLEEVE
ON CONNECTION PIN, FRONT 		001 A 18 035 111 53  -
097 LOCKING PLATE
FOR CONNECTION PIN TO SILENT BLOCK IN SUPPORT 		001 A 18 099 401 12  -
098 HEX.-HD. SCREW
FOR CONNECTION PIN TO SILENT BLOCK IN SUPPORT 		001 A 18 099 704 30  -
GREASE FITTING
A 6 DIN 71412 IN REAR EYE FOR REAR AXLE TUBE, RIGHT 		001 -
099 GREASE FITTING
IN FRONT EYE FOR REAR AXLE TUBE, RIGHT 		001 A 00 099 711 88  -
RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION
Replaced by: A  111 350 02 75 		- A 18 035 009 75  -
100 RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION 		001 A 11 135 002 75  -
101 SUPPORT WITH RETAINER
FOR REAR AXLE SUSPENSION 		001 A 18 035 009 32  -
LOCK WASHER
B 10 DIN 127 FOR RUBBER MOUNTING IN SUPPORT 		002 -
HEX.-HD. SCREW
M 10X35 DIN 931-8 G FOR RUBBER MOUNTING IN SUPPORT 		002 -
104 THRUST ARM, LEFT 001 A 18 035 000 29  -
105 THRUST ARM, RIGHT 001 A 18 035 001 29  -
106 CYLINDR. SCREW
FOR SHOCK ABSORBER MOUNTING 		004 A 12 099 009 20  -
107 CYLINDR. SCREW
FOR SHOCK ABSORBER MOUNTING 		004 A 12 099 010 20  -
110 RUBBER MOUNTING
FOR THRUST ARM TO REAR AXLE TUBE 		002 A 12 035 207 65  -
111 TIGHTENING WASHER
FOR RUBBER MOUNTING WHEEL SIDE FOR THRUST ARM TO REAR AXLE TUBE 		002 A 12 035 205 76  -
112 TIGHTENING WASHER
FOR RUBBER MOUNTING, SCREW SIDE FOR THRUST ARM TO REAR AXLE TUBE 		002 A 12 035 206 76  -
113 LOCKING PLATE
FOR THRUST ARM TO REAR AXLE TUBE 		002 A 12 099 404 12  -
114 HEX.-HD. SCREW
FOR THRUST ARM TO REAR AXLE TUBE 		002 A 12 099 000 01  -
115 RUBBER MOUNTING,
26-MM DIA., TOP WITH BUSHING FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 18 035 110 86  -
TIGHTENING WASHER
FOR REAR AXLE SUSPENSION TO BODY FLOOR UP TO CHASSIS 002534 		001 A 18 035 001 67  -
116 TIGHTENING WASHER
FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 12 835 000 67  -
116 TIGHTENING WASHER
FOR REAR AXLE SUSPENSION TO BODY FLOOR FROM CHASSIS 002535 		- A 12 835 000 67  -
117 LOCKING PLATE
FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 18 035 103 73  -
HEX. NUT
M 22X1,5 DIN 936-5 S FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 -
120 RUBBER RING, BOTTOM
FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 18 035 105 86  -
121 CROSS ARM
FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 18 035 101 96  -
CONTROL SWITCH
SEE GROUP 54 		- -
122 SHACKLE
OPTIONAL FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 18 035 105 40  -
SHACKLE
OPTIONAL FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 18 035 114 40  -
123 SHACKLE
OPTIONAL FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 18 035 104 40  -
SHACKLE
OPTIONAL FOR REAR AXLE SUSPENSION TO BODY FLOOR 		001 A 18 035 113 40  -
HEX.-HD. SCREW
M 12X1,5X25 DIN 961-8 G FOR SHACKLE TO CROSS ARM 		001 -
LOCK WASHER
B 12 DIN 127 FOR SHACKLE TO CROSS ARM 		001 -
HEX. NUT
M 12X1,5 DIN 934-5 S FOR SHACKLE TO CROSS ARM 		001 -
HEX.-HD. SCREW
M 12X1,5X35 DIN 960-8 G FOR CROSS ARM TO SUPPORT 		001 -
LOCK WASHER
B 12 DIN 127 FOR CROSS ARM TO SUPPORT 		001 -
129 RUBBER MOUNTING
FOR CROSS ARM TO SUPPORT 		001 A 18 035 100 48  -
130 WASHER
FOR CROSS ARM 		001 A 18 035 100 76  -
131 SPACER TUBE
FOR CROSS ARM 		001 A 18 035 106 53  -
132 RUBBER BUFFER 002 A 18 035 107 44  -
133 CUP
FOR CROSS ARM 		002 A 18 035 103 43  -
LOCK WASHER
B 12 DIN 127 FOR CUP AND RUBBER BUFFER TO CROSS ARM 		001 -
HEX. NUT
M 12X1,5 DIN 934-5 S FOR CUP AND RUBBER BUFFER TO CROSS ARM 		001 -
RUBBER MOUNTING
FOR THRUST ARM, FRONT FOR THRUST ARM TO BODY FLOOR
Replaced by: A  111 352 00 65 		- A 18 035 200 65  -
136 RUBBER MOUNTING
FOR THRUST ARM, FRONT FOR THRUST ARM TO BODY FLOOR 		002 A 11 135 200 65  -
RETAINER
FOR THRUST ARM TO BODY FLOOR
Replaced by: A  110 352 00 67 		- A 18 035 201 67  -
137 RETAINER
FOR RUBBER MOUNTING FOR THRUST ARM TO BODY FLOOR 		002 A 11 035 200 67  -
CASTLE COLLAR NUT
FOR THRUST ARM TO BODY FLOOR
Replaced by: A  180 352 03 72 		- A 18 035 202 72  -
138 CASTLE COLLAR NUT
FOR THRUST ARM TO BODY FLOOR 		002 A 18 035 203 72  -
COTTER PIN
3X28 DIN 94 FOR THRUST ARM TO BODY FLOOR 		002 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA