| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | HOUSING REAR AXLE HOUSING WITH DIFFERENTIAL ABS 1:3.06 |
001 | A 124 350 82 14 |
| 005 | HOUSING REAR AXLE HOUSING WITH DIFFERENTIAL ASD 1:3.06 |
001 | A 124 350 93 14 |
| 005 | HOUSING REAR AXLE HOUSING WITH DIFFERENTIAL ASR 1:3.06 |
001 | A 124 350 90 14 |
| 008 | HOUSING | 001 | A 129 351 04 05 |
| 008 | HOUSING USED WITH INFRARED REMOTE CONTROL 103.940 099557 103.983 247486 |
001 | A 129 351 05 05 |
| 011 | SCREW PLUG | 002 | A 186 997 00 32 |
| 014 | DIFFERENTIAL GEAR LESS RING GEAR AND PINION |
001 | A 126 350 09 23 |
| 014 | DIFFERENTIAL GEAR LESS RING GEAR AND PINION VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
001 | A 126 350 40 23 |
| IMPORTANT INFORMATION BREAK-DOWN OF DIFFERENTIAL GEAR |
099 | Q 000000000001 | |
| 017 | THRUST WASHER AS REQUIRED 1.30 MM |
002 | A 184 353 00 62 |
| 017 | THRUST WASHER AS REQUIRED 1.35 MM |
002 | A 108 353 01 62 |
| 017 | THRUST WASHER AS REQUIRED 1.40 MM |
002 | A 184 353 01 62 |
| 017 | THRUST WASHER AS REQUIRED 1.45 MM |
002 | A 108 353 02 62 |
| 017 | THRUST WASHER AS REQUIRED 1.50 MM |
002 | A 184 353 02 62 |
| 017 | THRUST WASHER AS REQUIRED 1.55 MM |
002 | A 108 353 03 62 |
| 017 | THRUST WASHER AS REQUIRED 1.60 MM |
002 | A 184 353 03 62 |
| 017 | THRUST WASHER AS REQUIRED 1.65 MM |
002 | A 108 353 04 62 |
| 017 | THRUST WASHER AS REQUIRED 1.70 MM |
002 | A 184 353 04 62 |
| 017 | THRUST WASHER AS REQUIRED 2.8 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 10 62 |
| 017 | THRUST WASHER AS REQUIRED 2.9 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 09 62 |
| 017 | THRUST WASHER AS REQUIRED 3.0 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 08 62 |
| 017 | THRUST WASHER AS REQUIRED 3.1 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 07 62 |
| 017 | THRUST WASHER AS REQUIRED 3.2 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 06 62 |
| 017 | THRUST WASHER AS REQUIRED 3.3 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 05 62 |
| 017 | THRUST WASHER AS REQUIRED 3.4 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 04 62 |
| 017 | THRUST WASHER AS REQUIRED 3.5 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 03 62 |
| 017 | THRUST WASHER AS REQUIRED 3.6 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 02 62 |
| 017 | THRUST WASHER AS REQUIRED 4.0 MM ONLY FOR SECTIONAL REPAIR WORK I A T T E N T I O N ! PRIOR TO ORDERING A BODY SHELL, PLEASE DO ADHERE TO THE FOLLOWING: I I PLANT PRODUCTS CAN ONLY BE MANUFACTURED CONFORMING TO THE LATEST LEVEL I I WHEN ORDERING A BODY SHELL, PLEASE INDICATE THE SPECIAL VERSIONS (FROM DATA CARD) I I FOR POSSIBLE NEW ATTACHMENT PARTS, PLEASE REFER TO THE LATEST MICROFICHE, WITH DUE CONSIDERATION OF I IDENT NO. (VIN) I I ==============================================================================================================I VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 353 01 62 |
| 020 | SIDE GEAR | 002 | A 140 353 07 15 |
| 020 | SIDE GEAR VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 140 353 08 15 |
| 023 | DIFFERENTIAL PINION | 002 | A 140 353 05 14 |
| 026 | SPHERICAL WASHER | 002 | A 140 353 01 24 |
| 029 | PIN | 001 | A 126 353 08 21 |
| 032 | ROLL PIN | 001 | N 001481 006008 |
| 035 | THRUST WASHER LESS LINING; WITH 5 SHACKLES VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
010 | A 112 353 06 62 |
| 038 | THRUST WASHER WITH LINING ON BOTH SIDES VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
008 | A 129 353 11 62 |
| 044 | RING GEAR AND PINION 1:3.06 IMPORTANT:AFTER INSTALLATION IN VEHICLE,CONTROL UNIT SHOULD BE CODED WITH HAND-HELD TESTER AS SPECIFIED IN FOLLOWING TABLE: ============================================================================================================================== AUSFUEHRUNG ! AG4 TEMP. CODIERNUMMER CODE ! 420 440 ------------------------------------------------------------------------------------------------------------------------------ X X 000 018 128 ============================================================================================================================== |
001 | A 129 350 10 39 |
| 047 | GEAR 31 TEETH |
001 | A 126 353 01 85 |
| 050 | SCREW RING GEAR TO DIFFERENTIAL CASE |
010 | A 140 990 21 01 |
| IMPORTANT INFORMATION DIFFERENTIAL GEAR BEARING HAG 210 |
099 | Q 000000000001 | |
| 080 | TAPERED ROLLER BEARING RING GEAR BEARING |
002 | A 000 980 19 02 |
| 083 | SPACER WASHER AS REQUIRED 0.90 MM |
002 | A 116 353 14 52 |
| 083 | SPACER WASHER AS REQUIRED 1.00 MM |
002 | A 116 353 16 52 |
| 083 | SPACER WASHER AS REQUIRED 1.05 MM |
002 | A 116 353 17 52 |
| 083 | SPACER WASHER AS REQUIRED 1.10 MM |
002 | A 116 353 18 52 |
| 083 | SPACER WASHER AS REQUIRED 1.15 MM |
002 | A 116 353 19 52 |
| 083 | SPACER WASHER AS REQUIRED 1.20 MM |
002 | A 116 353 38 52 |
| 083 | SPACER WASHER AS REQUIRED 1.30 MM |
002 | A 116 353 39 52 |
| 083 | SPACER WASHER AS REQUIRED 1.40 MM |
002 | A 116 353 40 52 |
| 083 | SPACER WASHER AS REQUIRED 1.45 MM |
002 | A 116 353 41 52 |
| 083 | SPACER WASHER AS REQUIRED 1.50 MM |
002 | A 116 353 42 52 |
| 083 | SPACER WASHER AS REQUIRED 1.55 MM |
002 | A 116 353 43 52 |
| 083 | SPACER WASHER AS REQUIRED 1.60 MM |
002 | A 116 353 44 52 |
| 083 | SPACER WASHER AS REQUIRED 1.70 MM |
002 | A 116 353 45 52 |
| 083 | SPACER WASHER AS REQUIRED 1.80 MM |
002 | A 116 353 46 52 |
| 083 | SPACER WASHER AS REQUIRED 1.90 MM |
002 | A 116 353 47 52 |
| 083 | SPACER WASHER AS REQUIRED 2.00 MM |
002 | A 116 353 48 52 |
| 083 | SPACER WASHER AS REQUIRED 2.10 MM |
002 | A 116 353 49 52 |
| 083 | SPACER WASHER AS REQUIRED 2.20 MM |
002 | A 116 353 50 52 |
| 083 | SPACER WASHER AS REQUIRED 2.30 MM |
002 | A 116 353 51 52 |
| 083 | SPACER WASHER AS REQUIRED 2.40 MM |
002 | A 116 353 52 52 |
| 083 | SPACER WASHER AS REQUIRED 2.50 MM |
002 | A 116 353 53 52 |
| 083 | SPACER WASHER AS REQUIRED 2.60 MM |
002 | A 116 353 54 52 |
| 086 | COVER BEARING COVER |
002 | A 126 353 01 06 |
| 086 | COVER BEARING COVER USED WITH INFRARED REMOTE CONTROL 103.940 099557 103.983 247486 |
002 | A 126 353 04 06 |
| 086 | COVER BEARING COVER,LEFT VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
001 | A 129 350 05 02 |
| 086 | COVER BEARING COVER,RIGHT VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
001 | A 129 350 06 02 |
| 089 | BOOT BEARING COVER VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 124 353 00 89 |
| 092 | SEAL RING BEARING COVER TO AXLE HOUSING |
002 | A 003 997 25 48 |
| 095 | SCREW BEARING COVER TO AXLE HOUSING |
016 | N 000912 008012 |
| 098 | VALVE BLEEDER VALVE VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
001 | A 000 353 09 56 |
| 101 | PROTECTIVE CAP ONLY USED WITH ASD VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
001 | A 000 421 08 87 |
| 104 | SEAL RING INTERIOR FLANGE |
002 | A 020 997 25 47 |
| 104 | SEAL RING INTERIOR FLANGE VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 014 997 57 47 |
| 104 | SEAL RING INTERIOR FLANGE USED WITH INFRARED REMOTE CONTROL 103.940 099557 103.983 247486 |
002 | A 014 997 72 47 |
| 105 | REPAIR KIT MOUNTING PARTS |
001 | A 124 350 53 98 |
| 107 | FLANGE INSIDE |
002 | A 129 350 08 45 |
| 107 | FLANGE INSIDE VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 124 350 58 45 |
| 107 | FLANGE INSIDE USED WITH INFRARED REMOTE CONTROL 103.940 099557 103.983 247486 |
002 | A 129 350 09 45 |
| 113 | BALL BEARING VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 004 981 71 25 |
| 116 | SPACER WASHER AS REQUIRED 2.60 MM |
002 | A 115 357 76 52 |
| 116 | SPACER WASHER AS REQUIRED 2.65 MM |
002 | A 124 357 21 52 |
| 116 | SPACER WASHER AS REQUIRED 2.70 MM |
002 | A 115 357 75 52 |
| 116 | SPACER WASHER AS REQUIRED 2.75 MM |
002 | A 124 357 22 52 |
| 116 | SPACER WASHER AS REQUIRED 2.80 MM |
002 | A 115 357 74 52 |
| 116 | SPACER WASHER AS REQUIRED 2.85 MM |
002 | A 124 357 23 52 |
| 116 | SPACER WASHER AS REQUIRED 2.90 MM |
002 | A 115 357 64 52 |
| 116 | SPACER WASHER AS REQUIRED 2.95 MM |
002 | A 115 357 63 52 |
| 116 | SPACER WASHER AS REQUIRED 3.00 MM |
002 | A 115 357 62 52 |
| 116 | SPACER WASHER AS REQUIRED 3.05 MM |
002 | A 115 357 61 52 |
| 116 | SPACER WASHER AS REQUIRED 3.10 MM |
002 | A 115 357 60 52 |
| 116 | SPACER WASHER AS REQUIRED 3.15 MM |
002 | A 115 357 59 52 |
| 116 | SPACER WASHER AS REQUIRED 3.20 MM |
002 | A 115 357 58 52 |
| 116 | SPACER WASHER AS REQUIRED 3.25 MM |
002 | A 115 357 57 52 |
| 116 | SPACER WASHER AS REQUIRED 3.30 MM |
002 | A 115 357 56 52 |
| 116 | SPACER WASHER AS REQUIRED 3.35 MM |
002 | A 115 357 55 52 |
| 116 | SPACER WASHER AS REQUIRED 3.40 MM |
002 | A 115 357 54 52 |
| 119 | SNAP RING | 002 | A 115 994 04 34 |
| IMPORTANT INFORMATION (SHIM) ASR SENSOR TO REAR AXLE HOUSING |
099 | Q 000000000001 | |
| 122 | SHIM AS REQUIRED 1.0 MM |
002 | A 126 351 02 76 |
| 122 | SHIM AS REQUIRED 1.1 MM |
002 | A 126 351 03 76 |
| 122 | SHIM AS REQUIRED 1.2 MM |
002 | A 126 351 04 76 |
| 122 | SHIM AS REQUIRED 1.3 MM |
002 | A 126 351 05 76 |
| 122 | SHIM AS REQUIRED 1.4 MM |
002 | A 126 351 06 76 |
| 122 | SHIM AS REQUIRED 1.5 MM |
002 | A 126 351 07 76 |
| 122 | SHIM AS REQUIRED 1.6 MM |
002 | A 126 351 08 76 |
| 122 | SHIM AS REQUIRED 1.7 MM |
002 | A 126 351 09 76 |
| 122 | SHIM AS REQUIRED 1.8 MM |
002 | A 126 351 10 76 |
| 122 | SHIM AS REQUIRED 1.9 MM |
002 | A 126 351 11 76 |
| 122 | SHIM AS REQUIRED 2.0 MM |
002 | A 126 351 12 76 |
| 122 | SHIM AS REQUIRED 2.1 MM |
002 | A 126 351 13 76 |
| 122 | SHIM AS REQUIRED 2.2 MM |
002 | A 126 351 14 76 |
| 122 | SHIM AS REQUIRED 2.3 MM |
002 | A 126 351 15 76 |
| 125 | ADHESIVE TAPE | 002 | A 126 989 01 85 |
| IMPORTANT INFORMATION DRIVE PINION BEARING |
099 | Q 000000000001 | |
| 128 | SPACER WASHER AS REQUIRED 1.50 MM |
001 | A 116 353 11 52 |
| 128 | SPACER WASHER AS REQUIRED 1.55 MM |
001 | A 116 353 20 52 |
| 128 | SPACER WASHER AS REQUIRED 1.60 MM |
001 | A 116 353 21 52 |
| 128 | SPACER WASHER AS REQUIRED 1.65 MM |
001 | A 116 353 22 52 |
| 128 | SPACER WASHER AS REQUIRED 1.70 MM |
001 | A 116 353 23 52 |
| 128 | SPACER WASHER AS REQUIRED 1.75 MM |
001 | A 116 353 24 52 |
| 128 | SPACER WASHER AS REQUIRED 1.80 MM |
001 | A 116 353 25 52 |
| 128 | SPACER WASHER AS REQUIRED 1.85 MM |
001 | A 116 353 26 52 |
| 128 | SPACER WASHER AS REQUIRED 1.90 MM |
001 | A 116 353 27 52 |
| 128 | SPACER WASHER AS REQUIRED 1.95 MM |
001 | A 116 353 28 52 |
| 128 | SPACER WASHER AS REQUIRED 2.00 MM |
001 | A 116 353 29 52 |
| 128 | SPACER WASHER AS REQUIRED 2.05 MM |
001 | A 116 353 30 52 |
| 128 | SPACER WASHER AS REQUIRED 2.10 MM |
001 | A 116 353 31 52 |
| 128 | SPACER WASHER AS REQUIRED 2.15 MM |
001 | A 116 353 32 52 |
| 128 | SPACER WASHER AS REQUIRED 2.20 MM |
001 | A 116 353 33 52 |
| 128 | SPACER WASHER AS REQUIRED 2.25 MM |
001 | A 116 353 34 52 |
| 128 | SPACER WASHER AS REQUIRED 2.30 MM |
001 | A 116 353 35 52 |
| 128 | SPACER WASHER AS REQUIRED 2.35 MM |
001 | A 116 353 36 52 |
| 128 | SPACER WASHER AS REQUIRED 2.40 MM |
001 | A 116 353 37 52 |
| 131 | TAPERED ROLLER BEARING DRIVE PINION |
001 | A 000 980 84 02 |
| 134 | SPACER BUSHING | 001 | A 108 353 00 42 |
| 137 | THRUST WASHER | 002 | A 109 353 10 62 |
| 140 | TAPERED ROLLER BEARING DRIVE PINION |
001 | A 002 980 11 02 |
| 143 | THRUST WASHER | 001 | A 126 353 07 62 |
| 146 | SEAL RING DRIVE PINION |
001 | A 022 997 99 47 |
| 146 | SEAL RING DRIVE PINION Replaced by: A 025 997 00 47 |
001 | A 024 997 42 47 |
| 146 | SEAL RING DRIVE PINION |
001 | A 025 997 00 47 |
| 149 | FLANGE Replaced by: A 211 350 02 45 |
- | A 211 350 01 45 |
| 149 | JOINT FLANGE PROPELLER SHAFT 100 MM Replaced by: A 212 350 00 45 |
001 | A 211 350 02 45 |
| 149 | FLANGE PROPELLER SHAFT 100 MM |
001 | A 212 350 00 45 |
| 152 | NUT | 001 | A 123 353 00 72 |
| 155 | COVER END COVER |
001 | A 124 351 34 08 |
| 158 | SCREW Replaced by: N 910143 010009 |
- | A 000 990 32 04 |
| 158 | HEXALOBULAR BOLT END COVER |
008 | N 910143 010009 |
| 164 | GUIDE SIGN LIMITED-SLIP DIFFERENTIAL |
001 | A 124 584 58 17 |
| 167 | VALVE | 001 | A 126 350 00 90 |
| 173 | GASKET KIT O-RINGS VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
002 | A 129 350 01 84 |
| 176 | REPAIR KIT REAR AXLE HOUSING WITH DIFFERENTIAL |
001 | A 124 350 03 74 |
| 176 | REPAIR KIT REAR AXLE HOUSING WITH DIFFERENTIAL VACUUM LINE WITH CONNECTOR TO BE CUT OFF TO THE LENGTH REQUIRED, AND TO BE CONNECTED TO EXISTING VACUUM LINE BY MEANS OF 103.940 099556 103.983 247485 007 997 61 82 HOSE |
001 | A 124 350 07 74 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy