TRANSMISSION

EPC / Mercedes / 1 / FG / FG 120.100 / 26 / 033
‹ ›

№- Name A* Part number A

TRANSMISSION 		- XXX XXX XXX XXXX -
TRANSMISSION
WITHOUT CLUTCH HOUSING, BUT WITH RELEASE PARTS 		001 A 12 026 025 01  -
TRANSMISSION
WITHOUT CLUTCH HOUSING, BUT WITH RELEASE PARTS 		001 A 12 026 026 01  -
001 TRANSMISSION
WITHOUT CLUTCH HOUSING, BUT WITH RELEASE PARTS 		001 A 12 026 029 01  -
TRANSMISSION
WITHOUT CLUTCH HOUSING, BUT WITH RELEASE PARTS 		001 A 12 026 030 01  -

TRANSMISSION CASE 		- XXX XXX XXX XXXX -
TRANSMISSION CASE
Replaced by: A  186 260 04 11 		- A 18 626 000 11  -
002 TRANSMISSION CASE 001 A 18 626 004 11  -
003 CYLINDRICAL PIN
6 H8X16 DIN 7 		002 N 000007 006205 -
PIVOT PIN
FOR 186 260 00 11 FOR INTERMEDIATE LEVER - REVERSE GEAR 		001 A 13 626 200 74  -
004 PIVOT PIN
FOR 186 260 04 11 FOR INTERMEDIATE LEVER - REVERSE GEAR 		001 A 11 126 200 74  -

TRANSMISSION GEARS 		- XXX XXX XXX XXXX -
005 REVERSE IDLER GEAR 001 A 12 026 003 25  -
006 BUSHING 001 A 12 026 303 50  -
007 REVERSE IDLER SHAFT 001 A 18 626 300 30  -
008 THREADED PIN
WITH HARDENED PIVOT M 10X45 DIN 417-5 S REVERSE IDLER SHAFT TO TRANSMISSION CASE 		001 N 000417 010002 -
009 HEX. NUT M 10 DIN 934-5 S
REVERSE IDLER SHAFT TO TRANSMISSION CASE 		001 N 000934 010000 -
010 INTERMEDIATE LEVER
FOR REVERSE GEAR 		001 A 13 626 000 37  -
011 DOWEL PIN 8X16 N 37 B 001 N 900037 008104 -
SHIFT DOG
FOR REVERSE IDLER GEAR
Replaced by: A  121 263 01 23 		- A 13 626 300 23  -
012 SHIFT DOG
FOR REVERSE IDLER GEAR 		001 A 12 126 301 23  -
COUNTERSHAFT 001 A 12 026 001 24  -
COUNTERSHAFT - A 12 026 001 24  -
013 COUNTERSHAFT
LONG TOOTHING 		001 A 11 026 002 24  -
014 KEY 001 A 18 699 103 68  -
COUNTERSHAFT GEAR,
27 TEETH FOR 3RD GEAR
Replaced by: A  110 263 00 13 		- A 12 026 303 13  -
015 COUNTERSHAFT GEAR,
27 TEETH FOR 3RD GEAR 		001 A 11 026 300 13  -
016 COUNTERSHAFT GEAR,
32 TEETH FOR 4TH GEAR 		001 A 12 026 309 10  -
017 LOCK RING A 35X2 N 55 D 001 N 900055 035300 -
018 GROOVED BALL
BEARING 6305 C 3 DIN 625 ON COUNTERSHAFT 		002 N 000625 036305 -
SPACER WASHER,
0.10-MM THICK OPTIONAL 		NB A 12 026 314 52  -
019 SPACER WASHER,
0 25-MM THICK OPTIONAL 		NB A 12 026 315 52  -
SPACER WASHER,
0.50-MM THICK OPTIONAL 		NB A 12 026 316 52  -
SPACER WASHER,
1.00-MM THICK OPTIONAL 		NB A 12 026 308 52  -
020 PROTECTIVE WASHER
FOR GROOVED BALL BEARING, REAR 		001 A 18 699 018 40  -
REPLACED BY
120 260 13 20 TOGETHER WITH 1 SLIDING SLEEVE 111 262 04 23 		- A 12 026 005 20  -
DRIVE SHAFT
WITH SYNCHRONIZING CONE
Replaced by: A  120 260 13 20 		- A 12 026 010 20  -
DRIVE SHAFT
WITH SYNCHRONIZING CONE 		001 A 12 026 013 20  -
REPLACED BY
120 260 12 20 TOGETHER WITH 1 SLIDING SLEEVE 111 262 04 23 		- A 12 126 000 20  -
DRIVE SHAFT
WITH SYNCHRONIZING CONE
Replaced by: A  120 260 12 20 		- A 12 126 010 20  -
021 DRIVE SHAFT
WITH SYNCHRONIZING CONE 		001 A 12 026 012 20  -
022 OIL SLINGER
ON DRIVE SHAFT 		001 A 18 626 200 66  -
023 GROOVED BALL
BEARING 6306 ZN DIN 625 		001 N 000625 606306 -
024 SNAP RING 001 A 13 626 400 94  -
SEAL RING
A 30X2,5 AC DIN 73 102 ON DRIVE SHAFT
Replaced by: A  000 262 01 60 		- -
025 SEAL RING
ON DRIVE SHAFT 		001 A 00 026 201 60  -
026 SPACER RING 001 A 18 626 204 51  -
SNAP RING, 1.90 MM THICK
OPTIONAL FOR BEARING, DRIVE SHAFT TO TRANSMISSION CASE 		001 A 13 699 406 35  -
027 SNAP RING, 2.00, MM THICK
OPTIONAL FOR BEARING, DRIVE SHAFT TO TRANSMISSION CASE 		001 A 13 699 409 35  -
SNAP RING, 2.05 MM THICK
OPTIONAL FOR BEARING, DRIVE SHAFT TO TRANSMISSION CASE 		001 A 13 699 407 35  -
028 SPACER WASHER,
0.10-MM THICK OPTIONAL FOR BEARING, DRIVE SHAFT TO TRANSMISSION CASE 		NB A 13 626 206 52  -
SPACER WASHER,
0.20-MM THICK OPTIONAL FOR BEARING, DRIVE SHAFT TO TRANSMISSION CASE 		NB A 13 626 207 52  -
SPACER WASHER,
0.30-MM THICK OPTIONAL FOR BEARING, DRIVE SHAFT TO TRANSMISSION CASE 		NB A 13 626 208 52  -

MAIN SHAFT 		- XXX XXX XXX XXXX -
MAIN SHAFT
Replaced by: A  180 262 01 05 		- A 18 026 200 05  -
029 MAIN SHAFT 001 A 18 026 201 05  -

Replaced by: A  110 260 01 44 		- A 11 026 000 44  -
HELICAL GEAR
FOR 3RD GEAR
Replaced by: A  110 260 01 44 		- A 12 126 002 44  -
030 HELICAL GEAR
FOR 3RD GEAR 		001 A 11 026 001 44  -
031 NEEDLE BEARING
FOR 3RD GEAR 		001 A 00 098 129 12  -
SYNCHRONIZER RING
FOR 3RD AND 4TH GEAR
Replaced by: A  111 262 01 34 		- A 18 626 207 36  -
032 SYNCHRONIZER RING
FOR 3RD AND 4TH GEAR 		002 A 11 126 201 34  -
033 GUARD PLATE
FOR 3RD GEAR 		001 A 12 026 223 62  -

Replaced by: A  111 260 08 45 		- A 11 126 006 45  -

Replaced by: A  111 260 08 45 		- A 12 026 004 45  -
SYNCHRONIZER BODY
FOR 3RD AND 4TH GEAR
Replaced by: A  111 260 08 45 		- A 12 026 009 45  -
034 SYNCHRONIZER BODY
FOR 3RD AND 4TH GEAR 		001 A 11 126 008 45  -

Replaced by: A  111 262 04 35 		- A 12 026 208 35  -
SYNCHRONIZER BODY
Replaced by: A  111 262 04 35 		- A 12 026 209 35  -
035 SYNCHRONIZER BODY 001 A 11 126 204 35  -
036 THRUST SPRING 003 A 18 099 341 01  -
037 BALL 6,5 MM III DIN 5401 003 N 005401 306500 -
038 FOLLOWER 003 A 12 126 200 40  -
SLIDING SLEEVE
Replaced by: A  111 262 04 23 		- A 19 826 201 23  -
039 SLIDING SLEEVE 001 A 11 126 204 23  -
040 LOCK PLATE
FOR MAIN SHAFT, FRONT 		001 A 12 099 401 15  -
041 GROOVED NUT
FOR MAIN SHAFT, FRONT 		001 A 12 026 203 26  -
042 ROLLER CAGE
OPTIONAL 		001 A 00 098 108 12  -
ROLLER CAGE
OPTIONAL 		001 A 00 098 109 12  -
ROLLER CAGE
OPTIONAL 		001 A 00 098 137 12  -
043 ROLLER CAGE, SPLIT 001 A 12 098 103 12  -
REPLACED BY
110 262 00 12 TOGETHER WITH 1 SYNCHRONIZER BODY 111 260 07 45 		- A 12 026 210 12  -
REPLACED BY
110 262 00 12 TOGETHER WITH 1 SYNCHRONIZER BODY 111 260 07 45 		- A 12 026 210 12  -
HELICAL GEAR, 24 TEETH
FOR 2ND GEAR 		001 A 11 026 200 12  -
HELICAL GEAR, 24 TEETH
FOR 2ND GEAR 		001 A 11 026 200 12  -
HELICAL GEAR, 34 TEETH
FOR 2ND GEAR
Replaced by: A  111 262 04 12 		- A 11 126 202 12  -
044 HELICAL GEAR, 34 TEETH
LONG TOOTHING FOR 2ND GEAR 		001 A 11 126 204 12  -
045 BUTTING RING,
7.90-MM THICK OPTIONAL 		001 A 12 026 216 62  -
BUTTING RING,
7.95-MM THICK OPTIONAL 		001 A 12 026 217 62  -
BUTTING RING,
8.00-MM THICK OPTIONAL 		001 A 12 026 218 62  -
BUTTING RING,
8.05-MM THICK OPTIONAL 		001 A 12 026 219 62  -
BUTTING RING,
8.10-MM THICK OPTIONAL 		001 A 12 026 220 62  -
SYNCHRONIZER RING
FOR 2ND GEAR
Replaced by: A  111 262 01 34 		- A 18 626 207 36  -
046 SYNCHRONIZER RING
FOR 2ND GEAR 		001 A 11 126 201 34  -
SYNCHRONIZER RING
FOR 1ST GEAR
Replaced by: A  111 262 00 34 		- A 18 626 214 36  -
46a SYNCHRONIZER RING
FOR 1ST GEAR 		001 A 11 126 200 34  -

Replaced by: A  111 260 07 45 		- A 11 126 005 45  -

Replaced by: A  111 260 07 45 		- A 12 026 002 45  -
SYNCHRONIZER BODY
FOR 1ST AND 2ND GEAR
Replaced by: A  111 260 07 45 		- A 18 626 011 45  -
047 SYNCHRONIZER BODY
FOR 1ST AND 2ND GEAR 		001 A 11 126 007 45  -
REPLACED BY
111 262 03 35 TOGETHER WITH 1 SLIDING SLEEVE 111 262 03 23 		- A 12 026 205 35  -
REPLACED BY
111 262 03 35 TOGETHER WITH 1 SLIDING SLEEVE 111 262 03 23 		- A 12 026 205 35  -
SYNCHRONIZER BODY
Replaced by: A  111 262 03 35 		- A 18 626 206 35  -
048 SYNCHRONIZER BODY 001 A 11 126 203 35  -
048 SYNCHRONIZER BODY 001 A 11 126 203 35  -
049 THRUST SPRING 003 A 18 099 341 01  -
050 BALL 6,5 MM III DIN 5401 003 N 005401 306500 -
051 FOLLOWER 003 A 12 126 200 40  -
REPLACED BY
111 262 03 23 TOGETHER WITH 1 SYNCHRONIZER BODY 111 262 03 35 		- A 12 026 214 23  -
REPLACED BY
111 262 03 23 TOGETHER WITH 1 SYNCHRONIZER BODY 111 262 03 35 		- A 12 026 214 23  -
SLIDING SLEEVE
Replaced by: A  111 262 03 23 		- A 18 626 208 23  -
052 SLIDING SLEEVE 001 A 11 126 203 23  -
052 SLIDING SLEEVE 001 A 11 126 203 23  -
053 KEY
FOR MAIN SHAFT, 1ST AND 2ND GEAR 		001 A 12 026 200 81  -
054 GUARD PLATE,
4.40-MM THICK OPTIONAL 		001 A 12 026 211 62  -
GUARD PLATE,
4.45-MM THICK OPTIONAL 		001 A 12 026 212 62  -
GUARD PLATE,
4.50-MM THICK OPTIONAL 		001 A 12 026 213 62  -
GUARD PLATE,
4.55-MM THICK OPTIONAL 		001 A 12 026 214 62  -
GUARD PLATE,
4.60-MM THICK OPTIONAL 		001 A 12 026 215 62  -
055 ROLLER CAGE
FOR 1ST GEAR 		001 A 12 098 102 12  -
REPLACED BY
110 262 01 11 TOGETHER WITH 1 SYNCHRONIZER BODY 111 260 07 45 		- A 12 026 210 11  -
REPLACED BY
110 262 01 11 TOGETHER WITH 1 SYNCHRONIZER BODY 111 260 07 45 		- A 12 026 210 11  -
HELICAL GEAR, 28 TEETH
FOR 1ST GEAR
Replaced by: A  110 262 01 11 		- A 11 026 200 11  -
056 HELICAL GEAR, 28 TEETH
FOR 1ST GEAR 		001 A 11 026 201 11  -
056 HELICAL GEAR, 28 TEETH
FOR 1ST GEAR 		001 A 11 026 201 11  -
057 GUARD PLATE, 3.8 MM THICK
OPTIONAL 		001 A 18 626 201 62  -
GUARD PLATE, 3.9 MM THICK
OPTIONAL 		001 A 18 626 202 62  -
GUARD PLATE, 4.0 MM THICK
OPTIONAL 		001 A 18 626 203 62  -
GUARD PLATE, 4.1 MM THICK
OPTIONAL 		001 A 18 626 204 62  -
GUARD PLATE, 4.2 MM THICK
OPTIONAL 		001 A 18 626 205 62  -
GUARD PLATE, 4.3 MM THICK
OPTIONAL 		001 A 18 626 206 62  -
GUARD PLATE, 4.4 MM THICK
OPTIONAL 		001 A 18 626 207 62  -
GUARD PLATE, 4.5 MM THICK
OPTIONAL 		001 A 18 626 208 62  -
058 GROOVED BALL BEARING
ON MAIN SHAFT 		001 A 13 698 102 25  -
059 SNAP RING
SP 72 A DIN 5417 		001 N 005417 072000 -
060 SPACER WASHER,
0.1-MM THICK OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 13 626 204 52  -
SPACER WASHER,
0.2-MM THICK OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 13 626 205 52  -
SPACER WASHER,
0.3-MM THICK OPTIONAL ON MAIN SHAFT TO REAR TRANSMISSION CASE COVER 		NB A 13 626 209 52  -
061 HELICAL GEAR
FOR SPEEDOMETER DRIVE 		001 A 12 026 408 30  -
TRANSMISSION CASE
COVER, FRONT 		001 A 12 026 002 21  -
TRANSMISSION CASE
COVER, FRONT 		001 A 12 026 003 21  -
062 TRANSMISSION CASE
COVER, FRONT 		001 A 12 126 000 21  -
TRANSMISSION CASE
COVER, FRONT 		001 A 18 026 000 21  -
063 SEAL RING
FOR DRIVE SHAFT 		001 A 18 626 100 60  -
064 BALL PIN
FOR RELEASE FORK 		001 A 12 099 103 15  -
065 HEX. HEAD
SCREW M 8X25 DIN 931-8 G TRANSMISSION CASE COVER, FRONT TO TRANSMISSION CASE 		002 N 000931 008007 -
HEX. HEAD
SCREW M 8X22 DIN 933-8 G TRANSMISSION CASE COVER, FRONT TO TRANSMISSION CASE 		004 N 000933 008048 -
066 SPRING WASHER B 8 DIN 137
TRANSMISSION CASE COVER, FRONT TO TRANSMISSION CASE 		006 N 000137 008200 -
068 TRANSMISSION CASE
COVER, REAR 		001 A 12 026 020 16  -
069 PLUG 001 A 15 326 400 55  -
070 SHIM
FOR TRANSMISSION CASE COVER, REAR 		001 A 18 626 104 79  -
071 SEAL RING
FOR MAIN SHAFT 		001 A 00 099 717 46  -
072 SEAL RING
FOR SPEEDOMETER DRIVE 		001 A 12 026 100 80  -
073 SHAFT
FOR SPEEDOMETER DRIVE 		001 A 12 026 404 32  -
074 DRIVE GEAR,
SMALL, 13 TEETH FOR SPEEDOMETER DRIVE 		001 A 12 026 402 31  -
HEX. HEAD
SCREW M 6X30 DIN 931-8 G FLEXIBLE DRIVE SHAFT TO TRANSMISSION CASE COVER, REAR 		001 N 000931 006027 -
SPRING WASHER B 6 DIN 137
FLEXIBLE DRIVE SHAFT TO TRANSMISSION CASE COVER, REAR 		001 N 000137 006200 -
077 HEX. HEAD
SCREW M 8X22 DIN 933-8 G TRANSMISSION CASE COVER, REAR TO TRANSMISSION CASE 		002 N 000933 008048 -
078 COLLAR NUT
TRANSMISSION CASE COVER, REAR TO TRANSMISSION CASE 		004 A 12 099 000 10  -
079 SPRING WASHER B 8 DIN 137
TRANSMISSION CASE COVER, REAR TO TRANSMISSION CASE 		006 N 000137 008200 -
THREE-ARM FLANGE
ON MAIN SHAFT
Replaced by: A  111 262 00 45 		- A 18 626 208 45  -
080 THREE-ARM FLANGE
ON MAIN SHAFT 		001 A 11 126 200 45  -
081 LOCK
FOR THREE-ARM FLANGE TO MAIN SHAFT 		001 A 18 626 201 73  -
082 GROOVED NUT
FOR THREE-ARM FLANGE TO MAIN SHAFT 		001 A 18 626 202 26  -
083 SCREW PLUG M 24X1,5
FOR FILLING IN OIL 		001 A 18 699 700 32  -
084 SCREW PLUG WITH COLLAR
FOR OIL DRAIN 		001 A 18 699 701 32  -
085 SEAL RING
A 24X30 DIN 7603 A1 FOR OIL DRAIN 		001 N 007603 024100 -
HEX. HEAD
SCREW M 10X40 DIN 931-8 G TRANSMISSION TO CYLINDER CRANKCASE 		005 N 000931 010053 -
SPRING WASHER
B 10 DIN 137 TRANSMISSION TO CYLINDER CRANKCASE 		004 N 000137 010200 -
WASHER 10,5 DIN 125
TRANSMISSION TO CYLINDER CRANKCASE 		001 N 000125 010500 -
LOCK WASHER B 10 DIN 127
TRANSMISSION TO CYLINDER CRANKCASE 		001 N 000127 010200 -
HEX. NUT M 10 DIN 934-5 S
TRANSMISSION TO CYLINDER CRANKCASE 		001 N 000934 010000 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA