REAR AXLE

EPC / Mercedes / 1 / FG / FG 120.011 / 35 / 020
‹ ›

№- Name A* Part number A

REAR AXLE TUBE 		- XXX XXX XXX XXXX -
045 REAR AXLE
TUBE, LEFT, WITH THRUST ARM SUPPORT AND SCREW PLUG 		001 A 18 035 044 19  -
REAR AXLE
TUBE, RIGHT, WITH THRUST ARM SUPPORT
Replaced by: A  180 350 39 19 		- A 18 035 045 19  -
046 REAR AXLE
TUBE, RIGHT, WITH THRUST ARM SUPPORT 		001 A 18 035 039 19  -
047 BUSHING
FOR REAR AXLE TUBE, RIGHT 		002 A 18 035 101 50  -
47a CONICAL PLUG
ASM 10X1 N 87 FOR REAR AXLE TUBE, RIGHT VALID ONLY FOR REAR AXLE TUBE 180 350 45 19 		001 -
048 SCREW PLUG
AT REAR AXLE TUBE, LEFT ONLY VALID FOR REAR AXLE TUBE 180 350 44 19 		001 A 18 699 700 32  -
049 BREATHER
FOR REAR AXLE TUBE 		001 A 18 035 002 90  -

UNIVERSAL JOINT, SLIDING 		- XXX XXX XXX XXXX -
053 UNIVERSAL JOINT,
SLIDING, BEDDED IN NEEDLES 		001 A 18 035 005 13  -
054 WASHER
IN YOKE 		001 A 18 835 700 52  -
54a WASHER
IN YOKE 		001 A 18 035 701 52  -
055 CIRCLIP
48X1,75 DIN 472 IN YOKE UP TO REAR AXLE 8505559 		002 -
055 CIRCLIP
48X1,75 DIN 472 IN YOKE FROM REAR AXLE 8505560 		001 -
55a CIRCLIP
IN YOKE FROM REAR AXLE 8505560 		001 A 00 099 429 41  -
056 UNIVERSAL CROSS 001 A 18 035 700 13  -
057 NEEDLE BEARING BUSHING 004 A 12 035 701 14  -
REPLACED BY
2,5X11,8 II DIN 5402 2,5 Ø X 11,8 DIN 617 		- -
058 NEEDLE
2,5X11,8 II DIN 5402 FOR SLIDING SLEEVE 		100 -
059 SNAP RING, 2.25 MM THICK
OPTIONAL 		NB A 12 099 401 35  -
SNAP RING, 2.35 MM THICK
OPTIONAL 		NB A 12 099 404 35  -
SNAP RING, 2.40 MM THICK
OPTIONAL 		NB A 12 099 406 35  -
SNAP RING, 2.45 MM THICK
OPTIONAL 		NB A 12 099 407 35  -
SNAP RING, 2.55 MM THICK
OPTIONAL 		NB A 12 099 408 35  -
060 SLIDING SLEEVE
WITH GUIDE PLATE 		001 A 18 035 007 13  -
061 CIRCLIP
32X1,5 DIN 471 		002 -
062 CYLINDER ROLLER 4 X 4 132 A 18 098 100 86  -
063 RUBBER SLEEVE 001 A 18 035 705 91  -
064 TIGHTENING SCREW, INNER
FOR YOKE 		001 A 18 035 300 76  -
065 LOCK WASHER
B 10 DIN 127 		001 -
066 SHIM, 1.00 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 330 52  -
SHIM, 1.10 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 331 52  -
SHIM, 1.20 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 333 52  -
SHIM, 1.30 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 335 52  -
SHIM, 1.40 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 337 52  -
SHIM, 1.50 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 339 52  -
SHIM, 1.60 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 341 52  -
SHIM, 1.70 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 343 52  -
SHIM, 1.80 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 345 52  -
SHIM, 1.90 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 347 52  -
SHIM, 2.00 MM THICK
OPTIONAL FOR YOKE, INNER 		001 A 18 035 349 52  -

REAR AXLE SHAFT 		- XXX XXX XXX XXXX -
070 REAR AXLE SHAFT, LEFT 001 A 18 035 013 10  -
071 WHEEL FIXING PIN 005 A 12 040 101 71  -
072 REAR AXLE SHAFT, RIGHT 001 A 18 035 014 10  -
073 WHEEL FIXING PIN 005 A 12 040 101 71  -
ANNULAR GROOVED BEARING
FOR REAR AXLE SHAFT
Replaced by: A  183 981 00 25 		- A 18 098 100 25  -
074 ANNULAR GROOVED BEARING
FOR REAR AXLE SHAFT 		002 A 18 398 100 25  -
075 LOCKING PLATE
FOR REAR AXLE SHAFT 		002 A 18 335 303 73  -
076 GROOVED NUT
FOR REAR AXLE SHAFT 		002 A 15 335 700 26  -
077 HEX.-HD. SCREW
M 10X22 DIN 933 - 8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING 		004 -
078 HEX.-HD.SCREW
M 7X22 DIN 933 - 8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING 		004 -
079 HOSE CLAMP
S 9 N 262 		002 -
080 HOSE STRAP
9 X 0,4 N 263 ORDER BY THE METER 		NB -
081 BRAKE DRUM 002 A 12 042 106 01  -
SPHERICAL COLLAR NUT
FOR BRAKE DRUM AT WHEEL BOLT, REAR AXLE SHAFT
Replaced by: A  110 990 00 59 		- A 12 099 000 59  -
082 SPHERICAL COLLAR NUT
FOR BRAKE DRUM AT WHEEL BOLT, REAR AXLE SHAFT SEE ALSO GROUP 33 AND 40 		004 A 11 099 000 59  -

REAR AXLE SUSPENSION 		- XXX XXX XXX XXXX -
085 CONNECTION PIN
FOR REAR AXLE SUSPENSION 		001 A 18 035 106 74  -
086 SLEEVE, 26.0 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN 		002 A 18 035 101 53  -
SLEEVE, 25.8 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS 		002 A 18 035 118 53  -
SLEEVE, 25.6 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS 		002 A 18 035 117 53  -
SLEEVE, 25.4 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS 		002 A 18 035 116 53  -
SLEEVE, 25.2 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS 		002 A 18 035 115 53  -
SLEEVE, 25.00 MM LONG
OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS 		002 A 18 035 114 53  -
087 WASHER, 2.00 MM THICK
FOR REAR AXLE TUBE, OUTSIDE 		002 A 18 035 114 52  -
088 SHIM, 1.90 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 113 52  -
SHIM, 2.00 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 114 52  -
SHIM, 2.10 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 115 52  -
SHIM, 2.20 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 116 52  -
SHIM, 2.30 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 117 52  -
SHIM, 2.40 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 118 52  -
SHIM, 2.50 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 119 52  -
SHIM, 2.60 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 127 52  -
SHIM, 2.70 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 128 52  -
SHIM, 2.80 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 129 52  -
SHIM, 2.90 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 130 52  -
SHIM, 3.00 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 120 52  -
SHIM, 3.10 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 131 52  -
SHIM, 3.20 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS 		002 A 18 035 132 52  -
089 SHIM
ON CONNECTION PIN AT REAR AXLE TUBE MOUNTING, OUTSIDE 		002 A 18 035 103 51  -
090 RUBBER RING
ON SHIMS 		004 A 18 035 109 86  -
091 WEDGE
FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 A 18 035 100 74  -
092 LOCK WASHER
B 8 DIN 127 FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 -
093 HEX.NUT
M 8 DIN 934-5 S FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 -
094 CIRCLIP
IN CONNECTION PIN 		001 A 18 099 403 41  -
095 COVER
20 DIN 443 IN CONNECTION PIN 		001 -
096 SPACER SLEEVE
ON CONNECTION PIN, FRONT 		001 A 18 035 111 53  -
097 LOCKING PLATE
FOR CONNECTION PIN AT SILENT BLOC IN SUPPORT 		001 A 18 099 401 12  -
098 HEX.-HD.SCREW
FOR CONNECTION PIN AT SILENT BLOC IN SUPPORT 		001 A 18 099 704 30  -
099 GREASE FITTING
A 6 DIN 71412 IN REAR EYE FOR REAR AXLE TUBE, RIGHT 		001 -
GREASE FITTING
IN FRONT EYE FOR REAR AXLE TUBE, RIGHT
Replaced by: A  000 997 11 88 		- A 00 099 708 88  -
99a GREASE FITTING
IN FRONT EYE FOR REAR AXLE TUBE, RIGHT 		001 A 00 099 711 88  -
RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION
Replaced by: A  111 350 02 75 		- A 18 035 009 75  -
100 RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION 		001 A 11 135 002 75  -
SUPPORT WITH RETAINER
FOR REAR AXLE SUSPENSION
Replaced by: A  180 350 09 32 		- A 18 035 008 32  -
101 SUPPORT WITH RETAINER
FOR REAR AXLE SUSPENSION 		001 A 18 035 009 32  -
102 LOCK WASHER
B 10 DIN 127 FOR RUBBER MOUNTING IN SUPPORT 		002 -
103 HEX.-HD.SCREW
M 10X35 DIN 931-8 G FOR RUBBER MOUNTING IN SUPPORT 		002 -
104 THRUST ARM, LEFT
FOR REAR AXLE 		001 A 18 035 000 29  -
105 THRUST ARM, RIGHT
FOR REAR AXLE 		001 A 18 035 001 29  -
106 CYLINDRICAL SCREW
FOR MOUNTING SHOCK ABSORBER 		004 A 12 099 009 20  -
107 CYLINDRICAL SCREW
FOR MOUNTING SHOCK ABSORBER 		004 A 12 099 010 20  -
110 RUBBER MOUNTING
FOR THRUST ARM, REAR FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 035 207 65  -
111 WASHER
FOR RUBBER MOUNTING, WHEEL SIDE FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 035 205 76  -
112 WASHER
FOR RUBBER MOUNTING, SCREW SIDE FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 035 206 76  -
113 LOCKING PLATE
FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 099 404 12  -
114 HEX.-HD.SCREW
FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 099 000 01  -
RUBBER MOUNTING, TOP
FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR
Replaced by: A  121 351 01 86 		- A 12 135 100 48  -
115 RUBBER MOUNTING, TOP
FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR 		001 A 12 135 101 86  -
WASHER
FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR
Replaced by: A  128 350 00 67 		- A 18 035 001 67  -
116 WASHER
FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR 		001 A 12 835 000 67  -
117 LOCKING PLATE
FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR 		001 A 18 035 103 73  -
118 HEX.NUT
M 22X1,5 DIN 936-5 S FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR 		001 -
120 RUBBER RING, BOTTOM
FOR REAR AXLE SUSPENSION, BOTTOM AT BODY FLOOR 		001 A 18 035 105 86  -
121 CROSS ARM
FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 101 96  -
122 SHACKLE
OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 105 40  -
SHACKLE
OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 114 40  -
123 SHACKLE
OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 104 40  -
SHACKLE
OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 113 40  -
124 HEX.-HD.SCREW
M 12 X 1,5 X 25 DIN 961 - 8 G FOR SHACKLE AT CROSS STRUT 		001 -
125 LOCK WASHER
B 12 DIN 127 FOR SHACKLE AT CROSS STRUT 		001 -
126 HEX.NUT
M 12X1,5 DIN 934-5 S FOR SHACKLE AT CROSS STRUT 		001 -
127 HEX.-HD.SCREW
M 12 X 1,5 X 35 DIN 960 - 8 G FOR CROSS STRUT AT SUPPORT 		001 -
128 LOCK WASHER
B 12 DIN 127 FOR CROSS STRUT AT SUPPORT 		001 -
129 RUBBER MOUNTING
FOR CROSS STRUT AT SUPPORT 		001 A 18 035 100 48  -
130 WASHER
FOR CROSS STRUT 		001 A 18 035 100 76  -
131 SPACER TUBE
FOR CROSS STRUT 		001 A 18 035 106 53  -
132 RUBBER BUFFER 002 A 18 035 107 44  -
133 CUP
FOR CROSS STRUT 		002 A 18 035 103 43  -
134 LOCK WASHER
B 12 DIN 127 FOR CUP, RUBBER BUFFER AT CROSS STRUT 		001 -
135 HEX.NUT
M 12 X 1,5 DIN 934-5 S FOR CUP, RUBBER BUFFER AT CROSS STRUT 		001 -
RUBBER MOUNTING
FOR THRUST ARM AT BODY, FLOOR
Replaced by: A  111 352 00 65 		- A 18 035 200 65  -
136 RUBBER MOUNTING
FOR THRUST ARM, FRONT FOR THRUST ARM AT BODY, FLOOR 		002 A 11 135 200 65  -
137 RETAINER
FOR RUBBER MOUNTING FOR THRUST ARM AT BODY, FLOOR 		002 A 18 035 201 67  -
CASTLE COLLAR NUT
FOR THRUST ARM AT BODY, FLOOR
Replaced by: A  180 352 03 72 		- A 18 035 202 72  -
138 CASTLE COLLAR NUT
FOR THRUST ARM AT BODY, FLOOR 		002 A 18 035 203 72  -
139 COTTER PIN
3X28 DIN 94 FOR THRUST ARM AT BODY, FLOOR 		002 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA