REAR AXLE

EPC / Mercedes / 1 / FG / FG 120.011 / 35 / 039
‹ ›

№- Name A* Part number A

REAR AXLE 		- XXX XXX XXX XXXX -
001 REAR AXLE,
COMPLETE RATIO 1:3.9 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4 		001 A 12 035 064 00  -
REAR AXLE,
COMPLETE RATIO 1:4.1 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4
Replaced by: A  121 350 17 00 		- A 12 135 012 00  -
REAR AXLE,
COMPLETE RATIO 1:4.1 WITH RIGHT-HAND DRIVE THE BUILT-IN COMPENSATING LEVER FOR HAND BRAKE HAS TO BE EXCHANGED WITH 120 4 		001 A 12 035 062 00  -
REAR AXLE
HOUSING RATIO 1:3.9 WITH DIFFERENTIAL GEAR AND LEFT REAR AXLE TUBE, WITHOUT SLIDING JOINT, RIGHT REAR AXLE TUBE AND REAR 		001 A 10 535 001 00  -

REAR AXLE HOUSING 		- XXX XXX XXX XXXX -
002 REAR AXLE HOUSING 001 A 18 035 001 20  -
003 SCREW PLUG
FOR OIL DRAIN AND OIL FILLING IN 		002 A 18 699 700 32  -

DIFFERENTIAL GEAR 		- XXX XXX XXX XXXX -
004 DIFFERENTIAL GEAR
RATIO 1:3.9 		001 A 12 035 013 23  -
DIFFERENTIAL GEAR
RATIO 1:4.1 		001 A 18 035 005 23  -
REPLACED BY
110 353 01 01 TOGETHER WITH 1 BEARING RING 110 353 00 48 		- A 18 035 305 01  -
005 DIFFERENTIAL GEAR HOUSING 001 A 11 035 301 01  -
BEARING RING
FOR DIFFERENTIAL CASE 110 353 01 01 		001 A 11 035 300 48  -
006 GUARD PLATE, 1.3 MM THICK
OPTIONAL 		002 A 18 035 310 62  -
GUARD PLATE, 1.4 MM THICK
OPTIONAL 		002 A 18 035 311 62  -
GUARD PLATE, 1.5 MM THICK
OPTIONAL 		002 A 18 035 312 62  -
GUARD PLATE, 1.6 MM THICK
OPTIONAL 		002 A 18 035 313 62  -
GUARD PLATE, 1.7 MM THICK
OPTIONAL 		002 A 18 035 314 62  -
007 REAR AXLE
SIDE GEAR, LEFT, 16 TEETH 		001 A 18 035 308 15  -
REAR AXLE
SIDE GEAR, LEFT, 16 TEETH, HUB 36.3-MM DIA. REPAIR VERSION 		- A 18 035 310 15  -
008 REAR AXLE
SIDE GEAR, RIGHT, 16 TEETH 		001 A 18 035 003 40  -
REAR AXLE
SIDE GEAR, RIGHT, 16 TEETH, HUB 36.3-MM DIA. REPAIR VERSION 		- A 18 035 005 40  -
009 SPIDER GEAR, 10 TEETH 002 A 18 035 300 14  -
010 SPHERICAL WASHER 002 A 18 035 300 24  -
011 DIFFERENTIAL PIN 001 A 18 035 300 21  -
012 LOCK PIN
FOR DIFFERENTIAL PIN 		001 A 13 635 302 74  -
013 DRIVE PINION
WITH RING GEAR, RATIO 1:3.9 		001 A 12 035 013 39  -
DRIVE PINION
WITH RING GEAR, RATIO 1:4.1 		001 A 18 035 002 39  -
014 LOCKING PLATE
RING GEAR AT DIFFERENTIAL GEAR HOUSING 		008 A 12 099 400 10  -
015 HEX. HEAD SCREW
RING GEAR AT DIFFERENTIAL GEAR HOUSING 		008 A 18 399 001 01  -
016 TAPERED ROLLER BEARING
DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		002 A 00 098 114 05  -
017 THREADED RING
FOR REAR AXLE HOUSING FLANGE DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001 A 18 035 308 25  -
018 THREADED RING
FOR REAR AXLE HOUSING DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001 A 18 035 306 25  -
019 LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001 A 18 035 301 73  -
LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001 A 18 035 302 73  -
LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001 A 18 035 303 73  -
LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001 A 18 035 305 73  -
LOCK
OPTIONAL DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001 A 18 035 306 73  -
020 HEX. HEAD
SCREW M 6X12 DIN 933-8 G DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		002 N 000933 006015 -
021 LOCK PLATE
DIFFERENTIAL GEAR TO REAR AXLE HOUSING 		001 A 18 099 400 30  -
022 LOCK SCREW
THREADED RING TO REAR AXLE TUBE, LEFT 		001 A 18 099 002 15  -
023 LOCK PLATE
THREADED RING TO REAR AXLE TUBE, LEFT 		001 A 18 099 401 10  -
024 CYLINDER ROLLER BEARING 001 A 00 098 116 01  -
025 SPACER SLEEVE 001 A 18 035 300 40  -
026 PRESSURE RING 001 A 18 035 301 48  -
027 INCLINED BALL BEARING 001 A 00 098 104 27  -
028 SHOULDER RING 001 A 18 035 300 63  -
029 COVER
FOR REAR AXLE HOUSING, FRONT 		001 A 18 035 303 08  -
030 SEAL RING
FOR REAR AXLE HOUSING, FRONT 		001 A 00 099 713 46  -
031 JOINT FLANGE
FOR DRIVE PINION 		001 A 18 035 001 45  -
032 GROOVED NUT
FOR DRIVE PINION 		001 A 12 035 000 66  -
033 LOCK 001 A 12 099 400 44  -
034 SNAP RING, REAR 001 A 12 099 402 35  -
035 SNAP RING,
FRONT 80 DIN 9045 		001 N 009045 080000 -
036 ADJUSTING SCREW
FOR PRESSURE RING 		002 A 18 335 101 70  -
037 LOCK PLATE 15 DIN 93
FOR ADJUSTING SCREW 		002 N 000093 015000 -
038 HEX. NUT
FOR ADJUSTING SCREW 		002 A 18 099 001 50  -
039 SHIM, 1.00 MM THICK
OPTIONAL 		001 A 12 035 324 52  -
SHIM, 1.10 MM THICK
OPTIONAL 		001 A 12 035 326 52  -
SHIM, 1.20 MM THICK
OPTIONAL 		001 A 12 035 328 52  -
SHIM, 1.30 MM THICK
OPTIONAL 		001 A 12 035 330 52  -
SHIM, 1.40 MM THICK
OPTIONAL 		001 A 12 035 332 52  -
SHIM, 1.50 MM THICK
OPTIONAL 		001 A 12 035 334 52  -
SHIM, 1.60 MM THICK
OPTIONAL 		001 A 12 035 336 52  -
SHIM, 1.70 MM THICK
OPTIONAL 		001 A 12 035 338 52  -
SHIM, 1.80 MM THICK
OPTIONAL 		001 A 12 035 340 52  -
SHIM, 1.00 MM THICK
OPTIONAL 		001 A 12 035 342 52  -
SHIM, 2.00 MM THICK
OPTIONAL 		001 A 12 035 344 52  -
SHIM, 2.05 MM THICK
OPTIONAL 		001 A 12 035 345 52  -
040 HEX. HEAD
SCREW M 7X20 DIN 931-10 K COVER TO REAR AXLE HOUSING 		006 N 000931 007002 -
041 LOCK WASHER B 7 DIN 127
COVER TO REAR AXLE HOUSING 		006 N 000127 007200 -

REAR AXLE TUBE 		- XXX XXX XXX XXXX -
045 REAR AXLE
TUBE, LEFT, WITH THRUST ARM SUPPORT AND SCREW PLUG 		001 A 18 035 044 19  -
046 REAR AXLE
TUBE, RIGHT, WITH THRUST ARM SUPPORT 		001 A 18 035 039 19  -
047 BUSHING
FOR REAR AXLE TUBE, RIGHT 		002 A 18 035 101 50  -
048 SCREW PLUG
FOR OIL FILLING IN TO REAR AXLE TUBE, LEFT 		001 A 18 699 700 32  -
BREATHER
FOR REAR AXLE TUBE
Replaced by: A  180 350 04 90 		- A 18 035 002 90  -
049 BREATHER
FOR REAR AXLE TUBE 		001 A 18 035 004 90  -

UNIVERSAL JOINT, SLIDING 		- XXX XXX XXX XXXX -
053 UNIVERSAL JOINT, SLIDING 001 A 18 035 005 13  -
054 WASHER 001 A 18 035 701 52  -
055 LOCK RING 001 A 00 099 429 41  -
056 SLIDING SLEEVE 001 A 18 035 007 13  -
057 LOCK RING 32X1,5 DIN 471 002 N 000471 032000 -
058 CYLINDER ROLLER 132 A 18 098 100 86  -
059 WASHER 001 A 18 835 700 52  -
060 LOCK RING 48X1,75 DIN 472 001 N 000472 048000 -

Replaced by: A  111 350 00 28 		- A 18 035 700 13  -

Replaced by: A  111 350 00 28 		- A 12 035 701 14  -
UNIVERSAL JOINT
CROSS WITH NEEDLES AND BEARING BUSHINGS 2,5X11,8 II DIN 5402
Replaced by: A  111 350 00 28 		- -
061 UNIVERSAL JOINT
CROSS WITH NEEDLES AND BEARING BUSHINGS 		001 A 11 135 000 28  -
062 SNAP RING, 2.25 MM THICK
OPTIONAL 		004 A 12 099 401 35  -
SNAP RING, 2.35 MM THICK
OPTIONAL 		004 A 12 099 404 35  -
SNAP RING, 2.40 MM THICK
OPTIONAL 		004 A 12 099 406 35  -
SNAP RING, 2.45 MM THICK
OPTIONAL 		004 A 12 099 407 35  -
SNAP RING, 2.55 MM THICK
OPTIONAL 		004 A 12 099 408 35  -
TIGHTENING SCREW
Replaced by: A  111 353 00 76 		- A 18 035 300 76  -
064 TIGHTENING SCREW 001 A 11 135 300 76  -
065 LOCK WASHER B 10 DIN 127 001 N 000127 010200 -
066 SHIM, 1.00 MM THICK
OPTIONAL 		001 A 18 035 330 52  -
SHIM, 1.10 MM THICK
OPTIONAL 		001 A 18 035 331 52  -
SHIM, 1.20 MM THICK
OPTIONAL 		001 A 18 035 333 52  -
SHIM, 1.30 MM THICK
OPTIONAL 		001 A 18 035 335 52  -
SHIM, 1.40 MM THICK
OPTIONAL 		001 A 18 035 337 52  -
SHIM, 1.50 MM THICK
OPTIONAL 		001 A 18 035 339 52  -
SHIM, 1.60 MM THICK
OPTIONAL 		001 A 18 035 341 52  -
SHIM, 1.70 MM THICK
OPTIONAL 		001 A 18 035 343 52  -
SHIM, 1.80 MM THICK
OPTIONAL 		001 A 18 035 345 52  -
SHIM, 1.90 MM THICK
OPTIONAL 		001 A 18 035 347 52  -
SHIM, 2.00 MM THICK
OPTIONAL 		001 A 18 035 349 52  -
RUBBER SLEEVE
Replaced by: A  110 357 01 91 		- A 18 035 705 91  -
067 RUBBER SLEEVE 001 A 11 035 701 91  -
068 RUBBER SLEEVE, SPLIT
FOR REPAIRS 		001 A 11 035 703 91  -
069 CLIP
FOR REPAIRS 		009 A 00 298 810 78  -

REAR AXLE SHAFT 		- XXX XXX XXX XXXX -
REAR AXLE SHAFT, LEFT
Replaced by: A  180 350 26 10 		- A 18 035 013 10  -
070 REAR AXLE SHAFT, LEFT 001 A 18 035 026 10  -
071 WHEEL MOUNTING PIN 005 A 12 040 101 71  -
REAR AXLE SHAFT, RIGHT
Replaced by: A  180 350 27 10 		- A 18 035 014 10  -
072 REAR AXLE SHAFT, RIGHT 001 A 18 035 027 10  -
073 WHEEL MOUNTING PIN 005 A 12 040 101 71  -
074 GROOVED BALL BEARING
FOR REAR AXLE SHAFT 		002 A 18 398 100 25  -
075 LOCK PLATE
FOR REAR AXLE SHAFT 		002 A 18 335 303 73  -
076 GROOVED NUT
FOR REAR AXLE SHAFT 		002 A 15 335 700 26  -
077 HEX. HEAD
SCREW M 10X22 DIN 933-8 G REAR AXLE TUBE TO REAR AXLE HOUSING 		004 N 000933 010026 -
078 HEX. HEAD
SCREW M 7X22 DIN 933-8 G REAR AXLE TUBE TO REAR AXLE HOUSING 		004 N 000933 007006 -
HOSE CLAMP S 9 N 262
RUBBER SLEEVE TO REAR AXLE TUBE AND REAR AXLE HOUSING 		002 N 900262 009000 -
HOSE STRAP
(ORDER BY THE METER) RUBBER SLEEVE TO REAR AXLE TUBE AND REAR AXLE HOUSING 		002 N 900263 009000 -
081 BRAKE DRUM 002 A 12 042 106 01  -
082 SPHERICAL COLLAR NUT
FOR BRAKE DRUM TO WHEEL PIN, REAR AXLE SHAFT 		004 A 11 099 000 59  -

REAR AXLE SUSPENSION 		- XXX XXX XXX XXXX -
085 CONNECTION PIN 001 A 18 035 106 74  -
086 SLEEVE, 26.0 MM LONG
OPTIONAL 		002 A 18 035 101 53  -
SLEEVE, 25.8 MM LONG
OPTIONAL 		002 A 18 035 118 53  -
SLEEVE, 25.6 MM LONG
OPTIONAL 		002 A 18 035 117 53  -
SLEEVE, 25.4 MM LONG
OPTIONAL 		002 A 18 035 116 53  -
SLEEVE, 25.2 MM LONG
OPTIONAL 		002 A 18 035 115 53  -
SLEEVE, 25.0 MM LONG
OPTIONAL 		002 A 18 035 114 53  -
087 SHIM, 2.0 MM THICK 002 A 18 035 114 52  -
088 SHIM, 1.9 MM THICK
OPTIONAL 		002 A 18 035 113 52  -
SHIM, 2.0 MM THICK
OPTIONAL 		002 A 18 035 114 52  -
SHIM, 2.1 MM THICK
OPTIONAL 		002 A 18 035 115 52  -
SHIM, 2.2 MM THICK
OPTIONAL 		002 A 18 035 116 52  -
SHIM, 2.3 MM THICK
OPTIONAL 		002 A 18 035 117 52  -
SHIM, 2.4 MM THICK
OPTIONAL 		002 A 18 035 118 52  -
SHIM, 2.5 MM THICK
OPTIONAL 		002 A 18 035 119 52  -
SHIM, 2.6 MM THICK
OPTIONAL 		002 A 18 035 127 52  -
SHIM, 2.7 MM THICK
OPTIONAL 		002 A 18 035 128 52  -
SHIM, 2.8 MM THICK
OPTIONAL 		002 A 18 035 129 52  -
SHIM, 2.9 MM THICK
OPTIONAL 		002 A 18 035 130 52  -
SHIM, 3.0 MM THICK
OPTIONAL 		002 A 18 035 120 52  -
SHIM, 3.1 MM THICK
OPTIONAL 		002 A 18 035 131 52  -
SHIM, 3.2 MM THICK
OPTIONAL 		002 A 18 035 132 52  -
089 SHIM 002 A 18 035 103 51  -
090 RUBBER RING 004 A 18 035 109 86  -
091 WEDGE
CONNECTION PIN TO REAR AXLE HOUSING 		001 A 18 035 100 74  -
092 LOCK WASHER B 8 DIN 127
CONNECTION PIN TO REAR AXLE HOUSING 		001 N 000127 008200 -
093 HEX. NUT M 8 DIN 934-5 S
CONNECTION PIN TO REAR AXLE HOUSING 		001 N 000934 008000 -
094 LOCK RING
AT CONNECTION PIN 		001 A 18 099 403 41  -
095 COVER 20 DIN 443
AT CONNECTION PIN 		001 N 000443 020000 -
096 SPACER SLEEVE
FOR CONNECTION PIN, FRONT 		001 A 18 035 111 53  -
097 LOCK PLATE
CONNECTION PIN TO SILENT BLOCK IN SUPPORT 		001 A 18 099 401 12  -
098 HEX. HEAD SCREW
CONNECTION PIN TO SILENT BLOCK IN SUPPORT 		001 A 18 099 704 30  -
099 GREASE FITTING
A 6 DIN 71412 TO REAR EYE 		001 N 071412 006100 -
100 GREASE FITTING
B 6 DIN 71 412 HIGH = 20.5 MM TO FRONT EYE 		001 N 071412 006200 -
101 RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION 		001 A 11 135 002 75  -
102 SUPPORT WITH RETAINER
FOR REAR AXLE SUSPENSION 		001 A 18 035 009 32  -
103 HEX. HEAD
SCREW M 10X35 DIN 70 613-8 G RUBBER MOUNTING IN SUPPORT 		002 N 070613 010000 -
104 LOCK WASHER B 10 DIN 127
RUBBER MOUNTING IN SUPPORT 		002 N 000127 010200 -
105 THRUST ARM, LEFT
FOR REAR AXLE 		001 A 18 035 000 29  -
106 THRUST ARM, RIGHT
FOR REAR AXLE 		001 A 18 035 001 29  -
107 CYLINDER SCREW
FOR MOUNTING SHOCK ABSORBER 		004 A 12 099 009 20  -
108 CYLINDER SCREW
FOR MOUNTING SHOCK ABSORBER 		004 A 12 099 010 20  -
109 RUBBER MOUNTING
THRUST ARM TO REAR AXLE TUBE 		002 A 12 035 207 65  -
110 TIGHTENING PLATE
THRUST ARM TO REAR AXLE TUBE 		002 A 12 035 205 76  -
111 TIGHTENING PLATE
THRUST ARM TO REAR AXLE TUBE 		002 A 12 035 206 76  -
112 LOCK PLATE
THRUST ARM TO REAR AXLE TUBE 		002 A 12 099 404 12  -
113 HEX. HEAD SCREW
THRUST ARM TO REAR AXLE TUBE 		002 A 12 099 000 01  -
114 RUBBER RING
BOTTOM REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001 A 18 035 105 86  -
117 RUBBER MOUNTING
TOP REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001 A 12 135 101 86  -
118 TIGHTENING WASHER
REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001 A 12 835 000 67  -
119 LOCK PLATE
REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001 A 18 035 103 73  -
120 HEX. NUT
M 22X1,5 DIN 936-5 S REAR AXLE SUSPENSION, BOTTOM, TO BODY FLOOR 		001 N 000936 022000 -
REPLACED BY
180 350 01 93 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 SHACKLE 111 351 03 40 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. HEAD 		- A 18 035 101 96  -
REPLACED BY
180 350 01 93 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 SHACKLE 111 351 03 40 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. HEAD 		- A 18 035 101 96  -
121 CROSS STRUT 001 A 18 035 001 93  -
HEX. NUT
M 12X1,5 DIN 934-5 S 		001 N 000934 012004 -
122 HEX. NUT
M 14X1,5 DIN 934-5 S 		001 N 000934 014003 -
REPLACED BY
111 351 03 40 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. H 		- A 18 035 105 40  -
REPLACED BY
111 351 03 40 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. H 		- A 18 035 105 40  -
REPLACED BY
111 351 03 40 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. H 		- A 18 035 114 40  -
REPLACED BY
111 351 03 40 TOGETHER WITH 1 SHACKLE 111 351 02 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 14X1,5 DIN 934-5 S 1 HEX. H 		- A 18 035 114 40  -
123 SHACKLE 001 A 11 135 103 40  -
124 RUBBER MOUNTING 001 A 18 035 100 48  -
REPLACED BY
111 351 02 40 TOGETHER WITH 1 SHACKLE 111 351 03 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 12X1,5 DIN 934-5 S 1 HEX. H 		- A 18 035 104 40  -
REPLACED BY
111 351 02 40 TOGETHER WITH 1 SHACKLE 111 351 03 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 12X1,5 DIN 934-5 S 1 HEX. H 		- A 18 035 104 40  -
REPLACED BY
111 351 02 40 TOGETHER WITH 1 SHACKLE 111 351 03 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 12X1,5 DIN 934-5 S 1 HEX. H 		- A 18 035 113 40  -
REPLACED BY
111 351 02 40 TOGETHER WITH 1 SHACKLE 111 351 03 40 1 CROSS STRUT 180 350 01 93 1 HEX. NUT M 12X1,5 DIN 934-5 S 1 HEX. H 		- A 18 035 113 40  -
125 SHACKLE 001 A 11 135 102 40  -
HEX. HEAD
SCREW M 12X1,5X25 DIN 961-8 G 		001 N 000961 012011 -
126 HEX. HEAD
SCREW M 10X18 DIN 933-8 G 		001 N 000933 010011 -
LOCK WASHER B 12 DIN 127 001 N 000127 012200 -
127 SPRING WASHER 001 N 000137 010200 -
HEX. HEAD
SCREW M 12X1,5X35 DIN 960-8 G 		001 N 000960 012015 -
128 HEX. HEAD
SCREW M 12X1,5X30 DIN 960-8 G 		001 N 000960 012005 -
LOCK WASHER B 12 DIN 127 001 N 000127 012200 -
129 SPRING WASHER 001 N 000137 012200 -
WASHER 001 A 18 035 100 76  -
SPACER TUBE 001 A 18 035 106 53  -
132 RUBBER BUFFER
CROSS STRUT TO BODY FLOOR 		002 A 18 035 107 44  -
133 CUP
FOR RUBBER BUFFER CROSS STRUT TO BODY FLOOR 		002 A 18 035 103 43  -
133 CUP
FOR RUBBER BUFFER CROSS STRUT TO BODY FLOOR 		001 A 18 035 103 43  -
134 CUP
FOR RUBBER BUFFER CROSS STRUT TO BODY FLOOR 		001 A 18 035 104 43  -
LOCK WASHER B 12 DIN 127
CROSS STRUT TO BODY FLOOR 		001 N 000127 012200 -
135 HEX. NUT
M 12X1,5 DIN 934-5 S CROSS STRUT TO BODY FLOOR 		001 N 000934 012004 -
136 LOCK NUT
M 12X1,5 DIN 7967 CROSS STRUT TO BODY FLOOR 		001 N 007967 012000 -
137 RUBBER MOUNTING
THRUST ARM TO BODY FLOOR 		002 A 11 135 200 65  -
RETAINER
THRUST ARM TO BODY FLOOR
Replaced by: A  110 352 00 67 		- A 18 035 201 67  -
138 RETAINER
FOR RUBBER MOUNTING THRUST ARM TO BODY FLOOR 		002 A 11 035 200 67  -
140 CASTLE COLLAR NUT
THRUST ARM TO BODY FLOOR 		002 A 18 035 203 72  -
COTTER PIN 3X28 DIN 94
THRUST ARM TO BODY FLOOR 		002 N 000094 003005 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA