UNDERPAN

EPC / Mercedes / 1 / FG / FG 105.011 / 52 / 034
‹ ›

№- Name A* Part number A

UNDERPAN-EXPORT, SPECIAL REQUEST 		- XXX XXX XXX XXXX -
001 SLIDING PROTECTION,
FRONT TOWING CLAMP FOR SUB-FRAME, OIL PAN 		001 A 18 033 000 83  -
002 FIXING SHACKLE
FOR SLIDING PROTECTION AT SUB-FRAME, FRONT 		001 A 18 033 100 75  -
HEX. -HD. SCREW
M 10X25 DIN 933-8 G FOR SLIDING PROTECTION AT SUB-FRAME, FRONT 		001 -
LOCK WASHER
B 10 DIN 127 FOR SLIDING PROTECTION AT SUB-FRAME, FRONT 		001 -
005 COVER, LATERAL
FOR UNDERPAN, SUB-FRAME 		002 A 12 033 000 56  -
006 FIXING SHACKLE
FOR COVER, LATERAL AT SUB-FRAME 		002 A 12 033 101 75  -
HEX. -HD. SCREW
M 6X35 DIN 933-8 G FOR COVER, LATERAL AT SUB-FRAME 		002 -
LOCK WASHER
B 6 DIN 127 FOR COVER, LATERAL AT SUB-FRAME 		002 -
009 COVER PLATE, LEFT
FOR UNDERPAN BETWEEN FRONT CROSS TUBE AND SUBFRAME 		001 A 18 052 404 33  -
010 COVER PLATE, RIGHT
FOR UNDERPAN BETWEEN FRONT CROSS TUBE AND SUBFRAME 		001 A 18 052 403 33  -
LENS-HD. SHEET
METAL SCREW B 5, 5X9,5 DIN 7981 FOR COVER PLATE AT CROSS TUBE 		004 -
011 UNDERPAN
FOR MASTER CYLINDER 		- A 18 043 100 62  -
UNDERPAN
FOR MASTER CYLINDER 		- A 18 043 101 62  -
LENS-HD. SHEET
METAL SCREW BZ 3,9X9,5 DIN 7981 FOR UNDERPAN, MASTER CYLINDER AT FORKED SUPPORT 		005 -
REPLACED BY
180 520 12 75 TOGETHER WITH 6 WELDED BOLT M 8X17 180 524 00 74 6 CERAMIC RING 180 524 00 76 6 WASHER 9,5 DIN 126 6 HEX. 		- A 18 052 001 75  -
REPLACED BY
180 520 12 75 TOGETHER WITH 6 WELDED BOLT M 8X17 180 524 00 74 6 CERAMIC RING 180 524 00 76 6 WASHER 9,5 DIN 126 6 HEX. 		- A 18 052 007 75  -
015 UNDERPAN - CENTER
FOR CLUTCH AND TRANSMISSION 		- A 18 052 012 75  -
REPLACED BY
180 520 13 75 TOGETHER WITH 6 WELDED BOLT M 8X17 180 524 00 74 6 CERAMIC RING 180 524 00 76 6 WASHER 9,5 DIN 126 6 HEX. 		- A 18 052 002 75  -
REPLACED BY
180 520 13 75 TOGETHER WITH 6 WELDED BOLT M 8X17 180 524 00 74 6 CERAMIC RING 180 524 00 76 6 WASHER 9,5 DIN 126 6 HEX. 		- A 18 052 008 75  -
UNDERPAN - CENTER
FOR CLUTCH AND TRANSMISSION 		- A 18 052 013 75  -
017 REINFORCEMENT PLATE
IS WELDED WITH FRAME FOR UNDERPAN AT FORKED SUPPORT TO 180 520 01 75 180 520 02 75 180 520 07 75 180 520 08 75 		006 A 12 052 402 12  -
HEX. -HD. SCREW
M 8X15 DIN 933-8G FOR UNDERPAN AT FORKED SUPPORT TO 180 520 01 75 180 520 02 75 180 520 07 75 180 520 08 75 		006 -
WELDED BOLT M 8X17
TO 180 520 12 75 180 520 13 75 		006 A 18 052 400 74  -
CERAMIC RING
FOR PROTECTION WHEN WELDING THE BOLTS TO 180 520 12 75 180 520 13 75 		006 A 18 052 400 76  -
WASHER
9,5 DIN 126 FOR UNDERPAN AT FORKED SUPPORT TO 180 520 12 75 180 520 13 75 		006 -
LOCK WASHER
B 8 DIN 127 FOR UNDERPAN AT FORKED SUPPORT 		006 -
HEX. NUT
M 8 DIN 70616-5 S FOR UNDERPAN AT FORKED SUPPORT TO 180 520 12 75 180 520 13 75 		006 -
018 UNDERPAN
FOR REAR AXLE HOUSING 		001 A 18 035 003 83  -
18a RUBBER BUFFER 001 A 00 098 765 40  -
HEX. -HD. SCREW
M 10X20 DIN 933-8 G FOR UNDERPAN, REAR AXLE HOUSING AT DRIVE SHAFT TUNNEL 		002 -
LOCK WASHER
B 10 DIN 127 FOR UNDERPAN, REAR AXLE HOUSING AT DRIVE SHAFT TUNNEL 		002 -
HEX. NUT
M 10 DIN 934-5 S FOR UNDERPAN, REAR AXLE HOUSING AT DRIVE SHAFT TUNNEL 		002 -
SUPPORT, REAR
FOR UNDERPAN, REAR AXLE HOUSING UP TO CHASSIS 8503452 		001 A 18 035 112 40  -
022 SUPPORT, REAR
FOR UNDERPAN, REAR AXLE HOUSING FROM CHASSIS 8503453 		001 A 18 035 115 40  -
HEX. -HD. SCREW
M 10X20 DIN 933-8 G FOR UNDERPAN, REAR AXLE HOUSING AT SUPPORT, REAR 		001 -
LOCK WASHER
B 10 DIN 127 FOR UNDERPAN, REAR AXLE HOUSING AT SUPPORT, REAR 		001 -
HEX. NUT
M 10 DIN 934-5 S FOR UNDERPAN, REAR AXLE HOUSING AT SUPPORT, REAR 		001 -
031 UNDERPAN
FOR THRUST ARM SUSPENSION AT BODY FLOOR 		002 A 12 035 004 83  -
HEX. -HD.
SHEET METAL SCREW B 6,3X13 DIN 7976 FOR UNDERPAN AT BODY FLOOR 		004 -
SPRING WASHER
B 6 DIN 137 FOR UNDERPAN AT BODY FLOOR 		004 -
035 PROTECTIVE RAIL, FRONT
FOR FUEL PIPE AND BRAKE PIPE SEE ALSO GROUP 47 		001 A 18 047 604 46  -
PROTECTIVE RAIL, CENTER
FOR FUEL PIPE AND BRAKE PIPE
Replaced by: A  120 476 08 46 		- A 18 047 608 46  -
35a PROTECTIVE RAIL, CENTER
FOR FUEL PIPE AND BRAKE PIPE 		001 A 12 047 608 46  -
35b PROTECTIVE RAIL, REAR
FOR FUEL PIPE AND BRAKE PIPE 		001 A 18 047 001 48  -
LOCK WASHER
B 5 DIN 137 FOR PROTECTIVE RAIL AT BODY FLOOR 		016 -
LENS-HD. SHEET
METAL SCREW B 4, 2X9, 5 DIN 7981 FOR PROTECTIVE RAIL AT BODY FLOOR 		016 -

DRAW HOOK-EXPORT, SPECIAL REQUEST 		- XXX XXX XXX XXXX -
045 DRAW HOOK, REAR 002 A 13 631 000 08  -
046 RUBBER HOSE, 27 MM LONG
ORDER BY THE METER 		002 A 00 099 741 82  -
BASE, REAR
FOR DRAW HOOK, REAR WELDED DESIGN 		002 A 12 031 002 63  -
STIFFENING ANGLE, LEFT
FOR DRAW HOOK, REAR WELDED DESIGN 		001 A 12 031 001 57  -
STIFFENING ANGLE, RIGHT
FOR DRAW HOOK, REAR WELDED DESIGN 		001 A 12 031 002 57  -
049 BASE, REAR, LEFT
FOR DRAW HOOK, REAR SCREWED DESIGN 		001 A 12 031 003 63  -
050 BASE, REAR, RIGHT
FOR DRAW HOOK, REAR SCREWED DESIGN 		001 A 12 031 004 63  -
051 STRUT
FOR BASE AT BODY FLOOR SCREWED DESIGN 		002 A 12 031 504 04  -
HEX. -HD. SCREW
M 10X22 DIN 933-8 G FOR STRUT AT BODY FLOOR SCREWED DESIGN 		002 -
LOCK WASHER
B 10 DIN 127 FOR STRUT AT BODY FLOOR SCREWED DESIGN 		002 -
HEX. -HD. SCREW
M 10X25 DIN 933-8 G FOR BASE AT BODY FLOOR OR DRAW HOOK, REAR RESP. WELDED DESIGN 		004 -
LOCK WASHER
B 10 DIN 127 FOR BASE AT BODY FLOOR OR DRAW HOOK, REAR RESP. WELDED DESIGN 		004 -
HEX. -HD. SCREW
M 10X22 DIN 933-8 G FOR DRAW HOOK AT BASE, REAR SCREWED DESIGN 		002 -
HEX. -HD. SCREW
10X28 DIN 931-8 G FOR DRAW HOOK AT BASE, REAR SCREWED DESIGN 		002 -
LOCK WASHER
B 10 DIN 127 FOR DRAW HOOK AT BASE, REAR SCREWED DESIGN 		004 -
HEX. NUT
M 10 DIN 934-5 S FOR DRAW HOOK AT BASE, REAR SCREWED DESIGN 		004 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA