| № | Name | Ext. inf. | A* | Part number | A |
|---|---|---|---|---|---|
| 101 | GUIDE, VLV LFTR(AT INTAKE VALVE) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 24502738 | - |
| 102 | BOLT, VLV LFTR GDE RET(TO CYL BLK)(5/16-18X. 855 W/FL WA)(00. 659) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 24500055 | - |
| 104 | LIFTER, VLV(HYD, ROLLER, NON-ACTIVE FUEL MANAGEMENT LIFTER)(ACDelco #HL124)G 3.8-1(L67) | G 3.8-1(L67) | 12 | 17122490 | - |
| 105 | RING KIT, PSTN(STD) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 24502947 | - |
| 105 | RING KIT, PSTN(. 020 OVSI)(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 24502948 | - |
| 106 | PISTON KIT, ENG(STD)(W/PIN & RET)(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 24503974 | - |
| 106 | PISTON KIT, ENG(. 020 OVSI)(W/PIN & RET)(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 24503975 | - |
| 107 | ROD, CONN (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 24502361 | - |
| 108 | BOLT, CONN ROD(00. 659) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 12 | 25531956 | - |
| 109 | BEARING KIT, CONN ROD(0. 026MM U. S. )(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 89017689 | - |
| 109 | BEARING KIT, CONN ROD(STD)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 89017700 | - |
| 110 | PLUG, BALR SHF RR BRG HOLE(. 010 O. S. )(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24502084 | - |
| 110 | PLUG, BALR SHF RR BRG HOLE(CUP, 1. 960X0. 240, 1010 STL, PL) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 25521361 | - |
| 111 | PLUG, CM/SHF BRG HOLE(CUP, 1. 960X0. 240, 1010 STL, PL) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 25521361 | - |
| 112 | PLUG, AUTO HEX SOC DRN(ENG BLK OIL GAL)G(L67) | G(L67) | 00444776 | - | |
| 113 | PIN, CYL HD LOC | - | |||
| 114 | PIN, TRANS LOC(19. 5 MM X 18. 5 MM)(TO CYL BLK) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 12338076 | - |
| 114 | PIN, TRANS LOC(. 005 OVERSIZE-ONE END ONLY)(CHAMFERED ENDS)(DOWEL PIN-18. 49 ONE HALF LEN & 18. 62 OTHER HALF, 19. 25, STL PL)(**VPI 1-877-846-8243)G 3.8K(L36),3.8-1(L67) | G 3.8K(L36),3.8-1(L67) | 02 | 24501598 | - |
| 115 | PLUG, ENG BLK COOL DRN HOLE(10. 16 O. D X 4. 95)(STEEL)(L67) | (L67) | 24504119 | - | |
| 116 | FLYWHEEL, ENG(INCLS RING GEAR; LESS BAL WEIGHT)(**VPI 1-877-846-8243) (CA, US)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 24502772 | - |
| 116 | FLYWHEEL, ENG(HAS BALANCE WEIGHT)(**VPI 1-877-846-8243)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 24503035 | - |
| 117 | BOLT, HEX, 5/16-18X5/8, ZN(FLYWHL) | 24501365 | - | ||
| 118 | SEAL, CR/SHF RR OILG 3.8-1(L67) | G 3.8-1(L67) | 01 | 12582320 | - |
| 119 | SEAL, CR/SHF RR MAIN BRG CAP(REPAIR)(**VPI 1-877-846-8243) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 24500058 | - |
| 120 | RTV T-330, 3 OZ. CARTRIDGE(CR/SHF RR MAIN BRG CAP) | 12346141 | - | ||
| 121 | BOLT, CR/SHF BRG CAP(VERTICAL INSTALLATION)(7/16-14X3. 6)G 3.8-1(L67) | G 3.8-1(L67) | 08 | 24503056 | - |
| 121 | BOLT, CR/SHF BRG CAP(SHLDR 0. 26 L)(HFH, 7/16-14X3. 25, 2. 322 THD, 0. 83 OD, 300M(MOD) PC, W/0. 434DIA) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 08 | 24503157 | - |
| 121 | BOLT, CR/SHF BRG CAP(SIDE BOLTS)(HORIZONTAL INSTALLATION)(HFH, 8X1. 25X48) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 24505576 | - |
| 122 | CAP, CR/SHF BRG(PART OF 156, 157) | - | |||
| 123 | BEARING KIT, CR/SHF(FOR REMAN ENGINES)(FOR POSITIONS #1, 2, 3, 4)(0. 010 OS)(1/4" O/PAN BOLTS & 2-BOLT CAM THRUST PLATE. 1ST DES SEE 12365948) (CA, US)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 12365941 | - |
| 123 | BEARING KIT, CR/SHF(FOR REMAN ENGINES)(FOR POSITIONS 1, 2, 3, 4)(0. 020" OS)(1/4" O/PAN BOLTS & 2-BOLT CAM THRUST PLATE. 2ND DES SEE 12365949) (CA, US)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 12365942 | - |
| 123 | BEARING KIT, CR/SHF(FOR REMAN ENGINES)(FOR POSITIONS #1, 2, 3, 4)(0. 010 OS)(5/16" O/PAN BLTS & 3-BLT CAM THR PLATE. 2ND DES SEE 12365941) (CA, US)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 12365948 | - |
| 123 | BEARING KIT, CR/SHF(FOR REMAN ENGINES)(FOR POSITIONS #1, 2, 3, 4)(0. 020" OS)(5/16" O/PAN BOLTS & 3-BOLT CAM THRUST PLATE. 2ND DES SEE 12365942) (CA, US)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 12365949 | - |
| 123 | BEARING KIT, CR/SHF(STD)(#4)(USED WITH POWDERED METAL BRG CAP, FOR 1ST DES SEE 12537037)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 12480823 | - |
| 123 | BEARING KIT, CR/SHF(#1)(. 001"U. S. )(. 026MM U. S. )(POSN # 1)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 12482035 | - |
| 123 | BEARING KIT, CR/SHF(. 026MM U. S. )(POSN # 2)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 12482036 | - |
| 123 | BEARING KIT, CR/SHF(. 026MM U. S. )(POSN # 3)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 12482037 | - |
| 123 | BEARING KIT, CR/SHF(#4)(STD)(USED WITH IRON BRG CAP. FOR 2ND DES SEE 12480823)(**VPI 1-877-846-8243)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 12537037 | - |
| 123 | BEARING KIT, CR/SHF(#4)(0. 001 U. S. ) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 12537038 | - |
| 123 | BEARING KIT, CR/SHF(. 026MM U. S. )(POSN # 4)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 12537173 | - |
| 123 | BEARING KIT, CR/SHF(STD)(POSN # 1)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 89017696 | - |
| 123 | BEARING KIT, CR/SHF(STD)(POSN # 2)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 89017697 | - |
| 123 | BEARING KIT, CR/SHF(STD)(POSN # 3)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 89017698 | - |
| 124 | BALANCER, CR/SHF(PART NUMBER & DATE CODE STAMPED ON O. D. )G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 88960264 | - |
| 124 | BALANCER, CR/SHF(PART NUMBER & DATE CODE STAMPED ON O. D. )G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 88960265 | - |
| 125 | WASHER, CR/SHF BALR (CA, US)G 3.8K(L36),3.8-1(L67) | G 3.8K(L36),3.8-1(L67) | 01 | 24500082 | - |
| 126 | BOLT, CR/SHF BALR(3/4-16X3)("WASHER (REF 24500082) IS NOT REQUIRED WHEN USING THIS BOLT. ) (CA, US)G 3.8K(L36),3.8-1(L67) | G 3.8K(L36),3.8-1(L67) | 01 | 24504736 | - |
| 127 | CRANKSHAFT, (1ST DES HAS 3. 3" RADIUS C/BAL WGTS, USED ON ENG W/FTA; 2ND DES SEE 24502168) (CA, US)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 24501594 | - |
| 128 | KEY, CR/SHF BALR(TO CR/SHF)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 12563282 | - |
| 129 | PLUG, ENG BLK CORE HOLE(4-IN SI OF BLK, 2-IN RR OF BLK STAINLESS STEEL)(1. 51 OD, . 31 THK)(STAINLESS STEEL) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 06 | 24500867 | - |
| 129 | PLUG, ENG BLK CORE HOLE(1. 500" X . 058")(. 003 OVERSIZE)(BRASS CUP)(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | AR | 24501422 | - |
| 129 | PLUG, ENG BLK CORE HOLE(CUP DIA 1 9/16" DIA)(**VPI 1-877-846-8243) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | AR | 25513255 | - |
| 130 | PIN, ENG FRT CVR LOC(TO CYL BLK)(DWL PIN, 0. 25X0. 875, STL, PL, CHAMFERED ENDS) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24501162 | - |
| 130 | PIN, ENG FRT CVR LOC(1/4 X 1-3/8", STEEL)(CHAMFERED ENDS)(08. 939)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 25536323 | - |
| 131 | PLUG, SOCKET, 3/8-18X. 56, STL, CZ(ENG BLK OIL GAL)G(L67) | G(L67) | 03835577 | - | |
| 132 | BEARING, CM/SHF(POS #1 & #4)(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 24501060 | - |
| 132 | BEARING, CM/SHF(POS #2 & #3)(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 24501061 | - |
| 133 | STUD, ENG MT STRUT BRKT(**VPI 1-877-846-8243)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24500288 | - |
| 133 | STUD, ENG MT STRUT BRKT(M10X1. 5X15-M10X1. 5X75) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 24506983 | - |
| 134 | DAMPENER, TMG CHAIN(INCLS BOLT, RET RING)(HAS 0. 62" WIDE SHOE)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 24501297 | - |
| 134 | DAMPENER, TMG CHAIN(INCLS BOLT, RET RING)(HAS 0. 81" WIDE SHOE) (US, CA)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 24503893 | - |
| 135 | BOLT, TMG CHAIN DPNR(PART OF 134) | - | |||
| 136 | SPROCKET, CR/SHF(24 TEETH)(HAS 6-TOOTH SPLINE ON O. D. FOR OIL PUMP GEAR)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 24502431 | - |
| 136 | SPROCKET, CR/SHF(HAS 2 FLATS ON O. D. FOR OIL PUMP GEAR)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 24502455 | - |
| 137 | BOLT, CM/SHF SPKT(ALSO HOLDS BAL SHF GEAR)(1/2-20X1. 64, W/WA)(00. 659) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24501366 | - |
| 138 | CHAIN, CM/SHF TMG(HAS TRAPEZOID SHAPED LINKS) (CA, US)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 24504668 | - |
| 138 | CHAIN, CM/SHF TMG(HAS OVAL LINKS)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 25535094 | - |
| 139 | MAGNET, CM/SHF POSN SEN(02. 383)(ACDelco #213-3136) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 10456195 | - |
| 139 | MAGNET, CM/SHF POSN SEN(ACDelco #213-3136) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 10456195 | - |
| 140 | SPROCKET, CM/SHF(IS FLAT ON BOTH SIDES) (CA, US)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 24500459 | - |
| 140 | SPROCKET, CM/SHF(48 TEETH)(HAS A STEPPED UP SURFACE ON ONE SIDE) (CA, US)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 24505306 | - |
| 141 | GEAR, BALR SHF DRV(USED ON FTA I. D. ENGINES AND HAS A 3. 8MM RAISED CIRCULAR SFC)(**VPI 1-877-846-8243) (US, CA)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 24503639 | - |
| 141 | GEAR, BALR SHF DRV(USED ON FTB I. D. ENGINES AND HAS ONLY A 1. 00 RAISED SFC) (CA, US)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 24504792 | - |
| 142 | BOLT, CM/SHF THR PLT(1/4-20X. 88)(01. 723)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 25519242 | - |
| 143 | PLATE, CM/SHF THR(HAS 3 BOLT HOLES)(**VPI 1-877-846-8243) (CA, US)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 24500339 | - |
| 143 | PLATE, CM/SHF THR(HAS 2 BOLT HOLES)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 24502801 | - |
| 144 | CAMSHAFT, (**VPI 1-877-846-8243) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24503401 | - |
| 145 | KEY, CM/SHF SPKT (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24500618 | - |
| 146 | BOLT, BAL SHF GR(3/8-16 X 1. 170)(HEX W/FL WA) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24501367 | - |
| 147 | GEAR, BALR SHF(DRIVEN) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24503524 | - |
| 148 | PIN, BALR SHF GR | - | |||
| 149 | BOLT, BAL SHF RET(TO CYL BLK)(5/16-18X. 855 W/FL WA) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 02 | 24500055 | - |
| 150 | RETAINER, BALR SHF (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 24500374 | - |
| 151 | SHAFT KIT, BALR(W/FRT AND RR BEARING) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 12353522 | - |
| 152 | PLUG, HEX SOC, 1/4-18X. 69, DOG PT(KNOCK SEN HOLE) (CA, US)G(L67) | G(L67) | 12338136 | - | |
| 153 | PLUG, ENG BLK OIL GAL(1/4-18 SHORT THD, . 41 LONG, STL, ZP4342M)(250-18)(08. 971)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 00444776 | - |
| 153 | PLUG, ENG BLK OIL GAL(. 003 OVERSIZE FRT REPAIR ONLY)(. 592" X . 281")(BRASS CUP) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | AR | 24501424 | - |
| 153 | PLUG, ENG BLK OIL GAL(. 010 OVERSIZE-REAR REPAIR ONLY)(SQUARE SOC, 1/4-18 DRY SEAL PTF, 0. 41 THD, STL, ZC) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | AR | 24501425 | - |
| 154 | SENSOR, KNOCK(**VPI 1-877-846-8243) (CA, US)G 3.8-1(L67) | G 3.8-1(L67) | 01 | 10456206 | - |
| 155 | HEATER, ENG COOL (CA, US)G 3.8K(L36),3.8-1(L67) | G 3.8K(L36),3.8-1(L67) | 01 | 25537080 | - |
| 156 | BLOCK, ENG(INCL 122)(PART OF 157) | - | |||
| 157 | ENGINE, 3. 8 L(231 CID)SERV PARTIAL(1ST DES: HAS 5/16-18 OIL PAN BOLT HOLES; 2ND DES 24505444 IS DISCONTINUED)(CONSIST OF BLK, PISTON & ROD ASM, CONN ROD BRGS, CR/SHF, CR/SHF BRGS, CM/SHF BRGS, BAL SHF & BAL SHF BRGS. ) (CA, US)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 24504086 | - |
| 157 | ENGINE, 3. 8 L(231 CID)SERV PARTIAL(2ND DES: HAS 1/4-20 OIL PAN BOLTS; 1ST DES SEE 24504086) (CA, US)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 24505444 | - |
| 157 | ENGINE, GASOLINE (SERVICE)(1ST DES: HAS 5/16" OIL PAN BOLTS & 3-BOLT CAM THRUST PLATE;2ND DES SEE 12362221)(SEE ADDITIONAL INFORMATION ICON)(REMANUFACTURED-NOT FOR SALE WHERE IMPORTS ARE RESTRICTED) (CA, US)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 12362220 | - |
| 157 | ENGINE, GASOLINE (SERVICE)(2ND DES: HAS 1/4" OIL PAN BOLTS & 2 BOLT CAM THRUSTER PLATE; 1ST DES SEE 12362220)(SEE ADDITIONAL INFORMATION ICON)(REMANUFACTURED-NOT FOR SALE WHERE IMPORTS ARE RESTRICTED) (CA, US)G 3.8-1(L67),(2ND DES) | G 3.8-1(L67),(2ND DES) | 01 | 12362221 | - |
| K01 | GASKET KIT, ENG SERV(HAS GRAY SILICON PERIMETER OIL PAN GASKET)(**VPI 1-877-846-8243)G 3.8-1(L67),(1ST DES) | G 3.8-1(L67),(1ST DES) | 01 | 12353084 | - |
| K01 | GASKET KIT, ENG SERV(HAS MOLDED PLASTIC BAFFLE W/IMPREGNATED BEAD OF ORANGE SILICON) (CA, US)G 3.8-1(L67), (W/O VLV SEALS)(2ND DES) | G 3.8-1(L67), (W/O VLV SEALS)(2ND DES) | 01 | 12538686 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy