№ | Name | Ext. inf. | A* | Use of | Part number | A |
---|---|---|---|---|---|---|
rear lid lid lock |
||||||
(1) | rear lid | 1 | 7L6 827 025 AR | - | ||
(1) | rear lid for vehicles with spare wheel attachment on rear lid |
1 | 7L6 827 025 AQ | - | ||
2 | lid hinge PR-4E2,4E3
|
PR-4E2,4E3 | 1 | 7L6 827 301 E | - | |
2 | lid hinge PR-4E2,4E3
|
PR-4E2,4E3 | 1 | 7L6 827 301 B | - | |
2 | lid hinge F7L-6-105000* PR-4E7 |
PR-4E7 |
1 |
7L6 827 301 D | - | |
(2) | lid hinge | 1 | 7L6 827 302 C | - | ||
(2) | lid hinge | 1 | 7L6 827 302 B | - | ||
- | cable guide cover see illustration: |
2 | ||||
4 | fillister head bolt with multi-point socket head |
8 | N 908 962 02 | - | ||
5 | socket head bolt with inner multipoint head |
4 | N 909 891 02 | - | ||
5 | socket head bolt with inner multipoint head |
4 | N 909 891 01 | - | ||
6 | support plate for vehicles with spare wheel attachment on rear lid |
1 | 7L6 827 405 A | - | ||
7 | throttle control element ** see photo ** |
1 | 7L6 827 425 A | - | ||
7 | throttle control element | 1 | 7L6 827 425 | - | ||
8 | hexagon collar nut | 7 | N 902 158 05 | - | ||
8 | hexagon nut | 7 | N 902 158 02 | - | ||
9 | clip | 1 | 3B0 827 637 | - | ||
(10) | connecting piece remote control ** see photo ** |
1 | 3B0 862 247 A | - | ||
11 | servomotor use if required: |
1 2 2 |
7L6 959 781 | 5 | ||
11 | servomotor use if required: |
1 2 2 |
3B0 959 781 C | 7 | ||
12 | fillister hd. bolt | 2 | N 014 123 3 | - | ||
13 | retaining washer | 2 | N 012 097 3 | - | ||
15 | plate-type lock | 1 | 7L6 827 501 B | - | ||
15 | plate-type lock | 1 | 7L6 827 501 A | - | ||
16 | servomotor use if required: |
1 2 2 |
3B5 827 061 C | 6 | ||
19 | hexagon collar nut | 3 | N 902 158 05 | - | ||
19 | hexagon nut | 3 | N 902 158 02 | - | ||
20 | lid lock F >> 7L-7-020 000* also use: F 7L-6-020 061>> 7L-6-046 597 observe technical service handbook: PR-4E2,4E3
|
PR-4E2,4E3 | 1 1 |
7L6 827 505 | - | |
20 | lid lock PR-4E2,4E3
|
PR-4E2,4E3 | 1 | 7L6 827 505 D | - | |
- | stop buffer F 7L-6-020 061>> 7L-6-046 597 |
1 |
7L0 827 589 | - | ||
20 | lid lock F 7L-6-105 000>>* PR-4E7 |
PR-4E7 |
1 |
7L6 827 505 C | - | |
21 | clip ** see photo ** |
1 | 191 837 199 | - | ||
22 | cylinder screw, self-locking |
2 | N 906 405 01 | - | ||
23 | operating rod | 1 | 7L6 827 515 | - | ||
(24) | striker plate with motor for power latch for rear lid F >> 7L-7-020 000* PR-4E2,4E3
|
PR-4E2,4E3 | 1 | 7L0 827 511 C | - | |
(24) | striker plate with motor for power latch for rear lid F 7L-6-105 000>>*7L-7-020 000* PR-4E7+GY1 |
PR-4E7+GY1 |
1 |
7L0 827 511 E | - | |
(24) | striker plate with motor for power latch for rear lid F 7L-6-020 001>>* PR-GY1 |
PR-GY1 |
1 |
7L0 827 511 E | - | |
24 | striker plate PR-GY0
|
PR-GY0 | 1 | 7H0 827 512 B | - | |
24 | striker plate PR-GY0
|
PR-GY0 | 1 | 7H0 827 512 A | - | |
24 | striker plate PR-GY0
|
PR-GY0 | 1 | 7H0 827 512 | - | |
25 | countersunk multi-point socket head bolt |
2 | N 907 448 04 | - | ||
(25) | countersunk multi-point socket head bolt for vehicles with power latch for rear lid |
2 | N 908 047 05 | - | ||
(25) | countersunk multi-point socket head bolt for vehicles with power latch for rear lid |
2 | N 908 047 02 | - | ||
26 | cover for bonnet lock | 1 | 7L6 827 519 | - | ||
27 | protective plate | 1 | 7L6 827 529 | - | ||
28 | bowden cable use if required: |
1 1 |
7L6 827 531 B | - | ||
28 | bowden cable use if required: |
1 1 |
7L6 827 531 A | - | ||
- | cable ties | 1 | N 909 377 02 | - | ||
- | cable ties | 1 | N 909 377 01 | - | ||
29 | gas filled strut F >> 7L-6-050 000* PR-1G1,1G6, 1G8 |
PR-1G1,1G6, 1G8 |
2 |
7L6 827 550 J | - | |
29 | gas filled strut spare wheel mounting F >> 7L-6-050 000* PR-1G1,1G6, 1G8 |
PR-1G1,1G6, 1G8 |
2 |
7L6 827 550 C | - | |
(29) | gas filled strut D >> - 07.11.2005 PR-1G2,1G3
|
PR-1G2,1G3 | 2 | 7L6 827 550 P | 5 | |
(29) | gas filled strut for vehicles with spare wheel attachment on rear lid D - 07.11.2005>> PR-1G2,1G3
|
PR-1G2,1G3 | 1 | 7L6 827 550 P | 5 | |
(29) | gas filled strut for vehicles with spare wheel attachment on rear lid D - 07.11.2005>> PR-1G2,1G3
|
PR-1G2,1G3 | 1 | 7L6 827 550 M | 3 | |
(29) | gas filled strut D - 07.11.2005>> PR-PR-4E7
|
PR-PR-4E7 | 1 | 7L6 827 550 N | 4 | |
29 | gas filled strut D >> - 07.11.2005 PR-1G1,1G6,
1G8 |
PR-1G1,1G6, 1G8 |
2 | 7L6 827 550 N | 4 | |
(29) | gas filled strut D - 07.11.2005>> PR-1G1,1G6,
1G8+4E2,4E3 |
PR-1G1,1G6, 1G8+4E2,4E3 |
1 | 7L6 827 550 N | 4 | |
(29) | gas filled strut D - 07.11.2005>> PR-1G1,1G6,
1G8+4E2,4E3 |
PR-1G1,1G6, 1G8+4E2,4E3 |
1 | 7L6 827 550 L | 5 | |
(29) | gas filled strut F >> 7L-6-050 000* PR-1G2,1G3 |
PR-1G2,1G3 |
2 |
7L6 827 550 D | 6 | |
(29) | gas filled strut F 7L-6-105 000>>* PR-4E7 |
PR-4E7 |
1 |
7L6 827 550 J | - | |
(29) | gas filled strut spare wheel mounting F 7L-6-105 000>>* PR-4E7 |
PR-4E7 |
1 |
7L6 827 550 C | - | |
(29) | gas filled strut F 7L-6-050 001>>* PR-1G1,1G6, 1G8+4E2,4E3 |
PR-1G1,1G6, 1G8+4E2,4E3 |
1 |
7L6 827 550 J | - | |
(29) | gas filled strut spare wheel mounting F 7L-6-050 001>>* PR-1G1,1G6, 1G8+4E2,4E3 |
PR-1G1,1G6, 1G8+4E2,4E3 |
1 |
7L6 827 550 C | - | |
(29) | gas filled strut F 7L-6-050 001>>* PR-1G1,1G6, 1G8+4E2,4E3 |
PR-1G1,1G6, 1G8+4E2,4E3 |
1 |
7L6 827 550 E | - | |
(29) | gas filled strut F 7L-6-050 001>>* PR-1G2,1G3+ 4E2,4E3 |
PR-1G2,1G3+ 4E2,4E3 |
1 |
7L6 827 550 D | 6 | |
(29) | gas filled strut for rear window, heated see illustration: |
|||||
30 | ball stud | 1 | WHT 001 333 | - | ||
(30) | ball stud | 1 | WHT 001 670 | - | ||
31 | protective film (self-adhesive) make up from: |
2 X |
||||
- | protective film | 1 | AKL 448 030 05 | - | ||
32 | cover cap | 1 | 7L6 827 563 A | - | ||
33 | handle for vehicles with spare wheel attachment on rear lid |
1 | 7L6 827 565 B | - | ||
primed | 7L6 827 565 B G RU | - | ||||
33 | handle for vehicles with spare wheel attachment on rear lid |
1 | 7L6 827 565 | - | ||
primed | 7L6 827 565 G RU | - | ||||
34 | seal | 1 | 6Q0 827 634 | - | ||
35 | handle PR-7X0,7X2
|
PR-7X0,7X2 | 1 | 1J0 827 566 L | - | |
(35) | handle use if required: PR-7X8,7X9
|
PR-7X8,7X9 | 1 1 |
7L6 827 609 A | - | |
37 | micro switch PR-7X0,7X2
|
PR-7X0,7X2 | 1 | 1J5 962 104 A | - | |
(37) | micro switch PR-7X8,7X9
|
PR-7X8,7X9 | 1 | 7L6 962 104 | - | |
(37) | micro switch included in position: PR-1G2,1G3
|
PR-1G2,1G3 | ||||
38 | oval hexagon socket head bolt | 2 | N 104 840 02 | - | ||
38 | oval hexagon socket head bolt | 2 | N 104 840 01 | - | ||
39 | bracket for vehicles with spare wheel attachment on rear lid |
1 | 7L6 827 601 B | - | ||
39 | bracket for vehicles with spare wheel attachment on rear lid MIT MIKROSCHALTER |
1 | 7L6 827 601 A | - | ||
39 | bracket for vehicles with spare wheel attachment on rear lid MIT MIKROSCHALTER |
1 | 7L6 827 601 | - | ||
40 | oval hexagon socket head bolt | 2 | N 104 840 02 | - | ||
40 | oval hexagon socket head bolt | 2 | N 104 840 01 | - | ||
(40) | oval hexagon socket head bolt | 2 | N 103 470 02 | - | ||
41 | hexagon collar nut | 2 | N 902 158 05 | - | ||
41 | hexagon nut | 2 | N 902 158 02 | - | ||
42 | guide section | 1 | 7L6 827 679 B | - | ||
(42) | guide section | 1 | 7L6 827 680 B | - | ||
43 | hex socket oval head collared | 4 | N 909 004 01 | - | ||
44 | rivetted cap nut | 4 | N 909 182 01 | - | ||
45 | guide | 1 | 7L6 827 683 D | - | ||
(45) | guide | 1 | 7L6 827 684 D | - | ||
- | stop | 2 | 7L6 827 681 | - | ||
46 | hex socket oval head collared | 4 | N 909 004 01 | - | ||
47 | rivetted cap nut | 4 | N 907 674 01 | - | ||
48 | gasket for flap | 1 1 |
7L6 827 705 K | - | ||
48 | gasket for flap | 1 1 |
7L6 827 705 H | - | ||
48 | gasket for flap | 1 1 |
7L6 827 705 D | - | ||
49 | spoiler PR-6GA
|
PR-6GA | 1 | 7L6 827 991 | - | |
primed | 7L6 827 991 G RU | - | ||||
(49) | spoiler PR-6GB,6GC
|
PR-6GB,6GC | 1 | 7L9 827 933 C | - | |
primed | 7L9 827 933 C G RU | - | ||||
50 | hex. nut with washer | 3 | N 906 636 03 | - | ||
50 | hex. nut with washer | 3 | N 906 636 02 | - | ||
50 | hex. nut with washer | 3 | N 906 636 01 | - | ||
51 | water drain valve | 2 | 7L0 899 188 | - | ||
52 | lock cylinder grease spray | 1 | G 052 778 A2 | - | ||
53 | bellows bungs see illustration: |
|||||
54 | rivetted cap nut | 4 | N 907 667 02 | - | ||
54 | rivetted cap nut | 4 | N 907 667 01 | - | ||
55 | cover use if required: |
8 |
7L6 809 953 F | - | ||
(55) | cover | 1 | 7L6 809 954 F | - | ||
- | spreader rivet | 8 | 7L6 868 307 | 1 | ||
- | clip | 8 | 7L6 810 997 | - | ||
56 | packing, adhesive shorten if necessary PR-6P1,6P2
|
PR-6P1,6P2 | 1 | 8D0 853 419 D | - | |
56 | underlay shorten if necessary PR-6P1,6P2
|
PR-6P1,6P2 | 1 | 8H0 853 419 | - | |
56 | underlay shorten if necessary PR-6P1,6P2
|
PR-6P1,6P2 | 1 | 3B0 827 633 C | - | |
56A | sealing plug PR-6P4
|
PR-6P4 | 4 | 6Q0 860 137 A | - | |
59 | clamping piece | 2 | 7L6 845 233 | - | ||
60 | hydraulic pump F 7L-6-105 000>>* PR-4E7 |
PR-4E7 |
1 |
7L6 827 449 | - | |
61 | hydraulic unit for rear lid actuator F 7L-6-105 000>>* PR-4E7 |
PR-4E7 |
1 |
7L6 827 611 B | - | |
61 | hydraulic unit for rear lid actuator F 7L-6-105 000>>* PR-4E7 |
PR-4E7 |
1 |
7L6 827 611 C | - | |
- | foam (self-adhesive) F 7L-6-050 001>>* |
X |
7D0 971 798 | - | ||
63 | bracket F 7L-6-105 000>>* also use: PR-4E7 |
PR-4E7 |
1 1 |
7L6 827 391 | - | |
63 | bracket F 7L-6-105 000>>* PR-4E7 |
PR-4E7 |
1 |
7L6 827 389 | - | |
64 | tilt angle sensor F 7L-6-105 000>>* PR-4E7
|
PR-4E7 | 1 |
7L6 907 651 A | - | |
65 | oval hexagon socket head bolt F 7L-6-105 000>>* PR-4E7
|
PR-4E7 | 4 |
N 905 988 04 | - | |
70 | spreader rivet | 8 | 7L6 868 307 | 1 | ||
70 | spoiler PR-6GB,6GC
|
PR-6GB,6GC | 1 | 7L9 827 940 | - | |
primed | 7L9 827 940 G RU | - | ||||
71 | bracket for spoiler PR-6GB,6GC
|
PR-6GB,6GC | 1 | 7L9 827 989 | - | |
72 | spoiler PR-6GB,6GC
|
PR-6GB,6GC | 1 | 7L9 827 933 A | - | |
primed | 7L9 827 933 A G RU | - |