Shock absorbers. anti-roll bar..
| № | Name | Ext. inf. | A* | Use of | Part number |
|---|---|---|---|---|---|
| suspension anti-roll bar shock absorbers rear
quattro
|
rear | quattro | |||
| 1 | stone chip guard D >> - 26.09.2011 |
1 | 8R0 511 539 B | ||
| (1) | stone chip guard D - 26.09.2011>> |
1 | 8R0 511 539 C | ||
| (1) | stone chip guard D >> - 26.09.2011 |
1 | 8R0 511 540 B | ||
| (1) | stone chip guard D - 26.09.2011>> |
1 | 8R0 511 540 C | ||
| 2 | wheel bearing housing see illustration: 505-010 |
505-010 |
|||
| 3 | spring support | 2 | 8K0 512 297 A | ||
| 3 | spring support | 2 | 8K0 512 297 C | ||
| 4 | spring support | 2 | 8K0 512 149 | ||
| 4 | spring support | 2 | 8K0 512 149 C | ||
| 5 | coil spring 1 paint mark 3 paint marks PR-1BA,1BL,
1BV+0YB |
2 | PR-1BA,1BL, 1BV+0YB |
8R0 511 115 AK | |
| (5) | coil spring 1 paint mark PR-1BA,1BL,
1BV+0YC |
2 | PR-1BA,1BL, 1BV+0YC |
8R0 511 115 AL | |
| (5) | coil spring 1 paint mark 2 paint marks PR-1BA,1BL,
1BV+0YD |
2 | PR-1BA,1BL, 1BV+0YD |
8R0 511 115 AM | |
| (5) | coil spring 1 paint mark 3 paint marks PR-1BA,1BL,
1BV+0YE |
2 | PR-1BA,1BL, 1BV+0YE |
8R0 511 115 AN | |
| (5) | coil spring 1 paint mark 2 paint marks PR-1BA,1BL,
1BV+0YF |
2 | PR-1BA,1BL, 1BV+0YF |
8R0 511 115 AP | |
| (5) | coil spring 1 paint mark 3 paint marks PR-1BA,1BL,
1BV+0YG |
2 | PR-1BA,1BL, 1BV+0YG |
8R0 511 115 AQ | |
| 6 | gas shock absorber D >> - 13.07.2009* PR-1BA
|
2 | PR-1BA | 8R0 513 035 C | |
| 6 | gas shock absorber
PR-1BA
|
2 | PR-1BA | 8R0 513 035 E | |
| (6) | gas shock absorber D >> - 13.07.2009* PR-1BV
|
2 | PR-1BV | 8R0 513 035 H | |
| (6) | gas shock absorber
PR-1BV
|
2 | PR-1BV | 8R0 513 035 J | |
| (6) | gas shock absorber
PR-1BL
|
1 | PR-1BL | 8R0 513 025 G | |
| (6) | gas shock absorber
PR-1BL
|
1 | PR-1BL | 8R0 513 025 J | |
| (6) | gas shock absorber
PR-1BL
|
1 | PR-1BL | 8R0 513 026 G | |
| (6) | gas shock absorber
PR-1BL
|
1 | PR-1BL | 8R0 513 026 J | |
| 7 | protective sleeve D >> - 13.07.2009* PR-1BA,1BV
|
2 | PR-1BA,1BV | 4B0 512 137 B | |
| (7) | protective sleeve D - 13.07.2009>>* PR-1BA,1BV
|
2 | PR-1BA,1BV | 4G0 512 137 A | |
| (7) | protective sleeve
PR-1BL
|
2 | PR-1BL | 8K0 512 137 A | |
| 8 | stop buffer
PR-1BA,1BV
|
2 | PR-1BA,1BV | 8K0 512 131 | |
| (8) | stop buffer
PR-1BL
|
2 | PR-1BL | 8R0 512 131 E | |
| 9 | shock absorber bearing | 2 | 8K0 513 353 E | ||
| 10 | hexagon nut, self-locking M10
|
M10 | 2 | N 102 951 01 | |
| 10 | hexagon nut, self-locking M10
|
M10 | 2 | N 102 951 01 | |
| 11 | washer 34X34X4
|
34X34X4 | 2 | WHT 002 389 | |
| 12 | bolt, hex. hd. with shoulder, self-locking M14X1,5X90
|
M14X1,5X90 | 2 | N 105 008 02 | |
| 13 | hexagon head bolt (combi) M10X35
|
M10X35 | 4 | N 910 661 01 | |
| 14 | anti-roll bar 22,5 MM
|
22,5 MM | 1 | 8R0 511 305 Q | |
| 17 | socket head collared bolt with inner multipoint head M8X30
|
M8X30 | 4 | N 106 447 01 | |
| 18 | coupling rod D >> - 27.09.2010 |
2 | 8K0 505 465 E | ||
| 18 | coupling rod | 2 | 8K0 505 465 G | ||
| 19 | hex collared bolt M10X65
|
M10X65 | 2 | N 909 978 02 | |
| 20 | hexagon collar nut self-locking M10
|
M10 | 2 | N 102 723 02 | |
| 21 | hex collared bolt M10X65
|
M10X65 | 2 | N 909 978 02 | |
| 22 | stone chip guard | 2 | 8K0 511 533 | ||
| 23 | protective cap | 2 | 8K0 512 135 | ||
| 24 | grommet 8,2X40
PR-1BL
|
8,2X40 | 2 | PR-1BL | 1J0 906 102 |
| 25 | flat connector housing with contact locking mechanism PR-1BL
|
2 | PR-1BL | 1J0 973 802 | |
| 30 | 2-pack epoxy adhesive
"RUS"
|
1 | "RUS" | DA 001 730 A2 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy