OIL PUMP

EPC / Mercedes / 1 / FG 189.033 / M 189.980 / 18 / 008
‹ ›

№- Name A* Part number A

OIL PUMP 		- XXX XXX XXX XXXX -
001 OIL PUMP 001 A 18 918 000 01  -
002 BEARING BUSHING, TOP
FOR DRIVE SHAFT 		001 A 13 618 101 50  -
003 DRIVE SHAFT 001 A 18 618 005 07  -
004 OIL PUMP 001 A 18 618 003 08  -
005 HEX.-HD. SCREW
M 6X42 DIN 931-8 G FOR OIL PUMP HOUSING, LOWER PART AT UPPER PART 		004 -
006 LOCK WASHER
B 6 DIN 127 FOR OIL PUMP HOUSING, LOWER PART AT UPPER PART 		004 -
007 HEX. NUT
M 6 DIN 934-5 S FOR OIL PUMP HOUSING, LOWER PART AT UPPER PART 		004 -
008 FOLLOWER
ON OIL PUMP DRIVE SHAFT 		001 A 19 818 100 27  -
009 DOWEL PIN
4X18 DIN 1481 FOR FOLLOWER 		001 -
010 SNAP RING
16 DIN 9045 FOR FOLLOWER 		001 -
011 SUCTION TO 001 A 18 618 004 52  -
012 TUBE CLAMP
FOR SUCTION TUBE 		001 A 18 699 509 44  -
013 COUPLING SLEEVE
FOR OIL PUMP DRIVE 		001 A 18 618 104 33  -
014 HEX.-HD. SCREW
M 8X18 DIN 933-8 G FOR OIL PUMP AT CYLINDER CRANKCASE 		002 -
015 SPRING
B 8 DIN 137 FOR OIL PUMP AT CYLINDER CRANKCASE 		002 -
016 HEX.-HD. SCREW
M 6X15 DIN 933-8 G FOR TUBE CLAMP, SUCTION TUBE, AT BRACKET 		001 -
017 LOCK WASHER
B 6 DIN 127 FOR TUBE CLAMP, SUCTION TUBE, AT BRACKET 		001 -
018 HEX. NUT
M 6 DIN 934-5 S FOR TUBE CLAMP, SUCTION TUBE, AT BRACKET 		001 -

OIL FILTER 		- XXX XXX XXX XXXX -
020 OIL FILTER 001 A 18 918 000 10  -
REPLACED BY
189 184 02 08 TOGETHER WITH 1 SEALING RING D 10X14 DIN 7603 A1 1 LOCKING SCREW M 10X1 DIN 7604 UP TO ENGINE 8500939 		- A 18 918 400 08  -
REPLACED BY
189 184 02 08 TOGETHER WITH 1 SEALING RING D 10X14 DIN 7603 A1 1 LOCKING SCREW M 10X1 DIN 7604 UP TO ENGINE 8500329 		- A 18 918 400 08  -
021 OIL FILTER
HOUSING, UPPER PART FROM CHASSIS 8500940 		- A 18 918 402 08  -
021 OIL FILTER
HOUSING, UPPER PART FROM CHASSIS 8500330 		- A 18 918 402 08  -
022 HOLLOW SCREW 001 A 12 118 400 73  -
023 SEALING RING
D 22X27 DIN 7603 A1 FOR CONNECTION OF OIL PIPE 		001 -
024 THREADED NIPPLE
16 DIN 7627 FOR CONNECTION OF OIL PIPE 		001 -
025 SEALING RING
D 8X12 DIN 7603 A1 FOR CONNECTION OF OIL PIPE, INJECTION PUMP 		001 -
026 THREADED NIPPLE
3 DIN 7627 FOR CONNECTION OF OIL PIPE, INJECTION PUMP 		001 -
027 VALVE CONE 002 A 18 118 400 30  -
028 SPRING 002 A 18 199 306 01  -
029 SEALING RING
D 18X22 DIN 7603 A1 		002 -
030 LOCKING SCREW 002 A 18 118 400 56  -
SEALING RING
D 10X14 DIN 7603 A1 FOR LOCK, CONNECTION OF FAN AND COUPLING FROM ENGINE 8500940 		- -
SEALING RING
D 10X14 DIN 7603 A1 FOR LOCK, CONNECTION OF FAN AND COUPLING FROM ENGINE 8500330 		- -
LOCKING SCREW
M 10X1 DIN 7604 FOR LOCK, CONNECTION OF FAN AND COUPLING FROM ENGINE 8500940 		- -
LOCKING SCREW
M 10X1 DIN 7604 FOR LOCK, CONNECTION OF FAN AND COUPLING FROM ENGINE 8500330 		- -
THREADED NIPPLE
4 DIN 7627 FOR OIL PIPE, OUTOMATIC FAN COUPLING SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM 		001 -
HOUSING WITHOUT
MICRONIC ELEMENT
Replaced by: A  000 184 30 01 		- A 00 018 435 01  -
035 HOUSING WITHOUT
MICRONIC ELEMENT 		001 A 00 018 430 01  -
036 HOUSING 001 A 00 018 414 02  -
037 COIL 001 A 00 018 405 12  -
038 DISCHARGE RING 001 A 00 018 400 15  -
039 SEALING RING 001 A 00 018 406 80  -
040 GASKET 001 A 00 018 417 80  -
041 HEX. NUT M 14X1,5 001 A 00 099 049 51  -
042 FILTER ELEMENT
WITH MICRONIC ELEMENT 		001 A 00 018 422 25  -
043 SEALING RING
FOR OIL FILTER HOUSING, UPPER PART AND LOWER PART 		001 A 18 199 703 41  -
044 SEALING RING
D 10X16 DIN 7603 A1 FOR LUBRICATING-OIL FILTER AT OIL FILTER HOUSING 		001 -
045 HEX.-HD. SCREW
M 10X1X160 DIN 960-8 G FOR LUBRICATING-OIL FILTER AT OIL FILTER HOUSING 		001 -
046 GASKET
FOR OIL FILTER HOUSING AT CYLINDER CRANKCASE 		001 A 18 918 400 80  -
047 WASHER
8, 4 DIN 433 FOR OIL FILTER HOUSING AT CYLINDER CRANKCASE 		003 -
048 HEX.-HD. SOCKET SCREW
M 8X100 DIN 912-8 G FOR OIL FILTER HOUSING AT CYLINDER CRANKCASE 		002 -
049 HEX.-HD. SOCKET SCREW
M 8X25 DIN 912-8 G FOR OIL FILTER HOUSING AT CYLINDER CRANKCASE 		001 -

OIL PIPES 		- XXX XXX XXX XXXX -
055 OIL PIPE
FROM OIL FILTER TO OIL COOLER AT CYLINDER COVER 		001 A 18 918 000 30  -
056 OIL PIPE
FROM OIL COOLER AT CYLINDER COVER TO CYLINDER CRANKCASE 		001 A 19 918 004 30  -
057 OIL PIPE
FROM OIL FILTER TO INJECTION PUMP 		001 A 18 918 001 30  -
058 BRACKET
FOR FIXING OF OIL PIPE FROM OIL FILTER TO INJECTION PUMP 		001 A 19 918 000 40  -
059 FIXING CLAMP
FOR OIL PIPE, INJECTION PUMP AT BRACKET 		001 A 63 699 500 20  -
060 LOCK WASHER
B 5 DIN 127 FOR OIL PIPE, INJECTION PUMP AT BRACKET 		001 -
061 HEX.-HD. SCREW
M 5X10 DIN 933-8 G FOR OIL PIPE, INJECTION PUMP AT BRACKET 		001 -

OIL RELIEF VALVE 		- XXX XXX XXX XXXX -
065 OIL RELIEF
VALVE, 6 KG/CMÝ AT CYLINDER CRANKCASE, SPARK PLUG SIDE 		001 A 18 618 002 33  -
066 SPRING 001 A 18 699 317 01  -
067 PISTON 001 A 15 918 100 42  -
068 LOCKING RING
12X1 DIN 472 		001 -
070 OIL RELIEF
VALVE, 8 KG/CMÝ AT CYLINDER CRANKCASE, REAR, FOR CYLINDER LUBRICATION 		001 A 18 618 003 33  -
071 SPRING 001 A 18 699 318 01  -
072 PISTON 001 A 15 918 100 42  -
073 LOCKING RING
12X1 DIN 472 		001 -
074 SEALING RING
D 20X24 DIN 7603 A1 FOR OIL RELIEF VALVE 		002 -
075 OIL COOLER TRANSMISSION - A 00 018 810 01  -
076 SHACKLE
FOR OIL COOLER AT BRACKET OF CYLINDER CRANKCASE 		- A 18 618 800 45  -
077 SHACKLE
FOR OIL COOLER AT BRACKET OF CYLINDER CRANKCASE 		- A 18 918 800 45  -
078 LOCK WASHER
B 6 DIN 127 FOR OIL COOLER AT BRACKET OF CYLINDER CRANKCASE 		- -
079 HEX.-HD. SCREW
M 6X15 DIN 933-8 G FOR OIL COOLER AT BRACKET OF CYLINDER CRANKCASE 		- -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA