| №- | Name | A* | Part number | A |
|---|---|---|---|---|
INSTRUMENTS AND SWITCHES |
- | XXX XXX XXX XXXX | - | |
| COMBI INSTRUMENT WITH KM-GRADUATION RATIO 0.935, REAR AXLE RATIO 1:4.67 Replaced by: A 189 542 06 01 |
- | A 18 954 200 01 | - | |
| 001 | COMBI INSTRUMENT WITH KM-GRADUATION RATIO 0.935, REAR AXLE RATIO 1:4.67 |
001 | A 18 954 206 01 | - |
| COMBI INSTRUMENT WITH M.P.H.-GRADUATION RATIO 1.50, REAR AXLE RATIO 1:4.67 Replaced by: A 189 542 07 01 |
- | A 18 954 201 01 | - | |
| COMBI INSTRUMENT WITH M.P.H.-GRADUATION RATIO 1.50, REAR AXLE RATIO 1:4.67 |
001 | A 18 954 207 01 | - | |
| COMBI-INSTRUMENT WITH KM-GRADUATION RATIO 1.0, REAR AXLE RATIO 1:5.125 Replaced by: A 189 542 11 01 |
- | A 18 954 205 01 | - | |
| COMBI-INSTRUMENT WITH KM-GRADUATION RATIO 1.0, REAR AXLE RATIO 1:5.125 SPECIAL REQUEST |
001 | A 18 954 211 01 | - | |
| COMBI INSTRUMENT WITH M.P.H.-GRADUATION RATIO 1.61, REAR AXLE RATIO 1/5.125 Replaced by: A 189 542 10 01 |
- | A 18 954 204 01 | - | |
| COMBI INSTRUMENT WITH M.P.H.-GRADUATION RATIO 1.61, REAR AXLE RATIO 1/5.125 SPECIAL REQUEST |
001 | A 18 954 210 01 | - | |
| COMBI INSTRUMENT WITH KM-GRADUATION RATIO 0.91, REAR AXLE RATIO 1:4.67 Replaced by: A 189 542 08 01 |
- | A 18 954 202 01 | - | |
| COMBI INSTRUMENT WITH KM-GRADUATION RATIO 0.91, REAR AXLE RATIO 1:4.67 |
001 | A 18 954 208 01 | - | |
| COMBI INSTRUMENT WITH M.P.H.-GRADUATION RATIO 1.46, REAR AXLE RATIO 1:4.67 Replaced by: A 189 542 09 01 |
- | A 18 954 203 01 | - | |
| COMBI INSTRUMENT WITH M.P.H.-GRADUATION RATIO 1.46, REAR AXLE RATIO 1:4.67 |
001 | A 18 954 209 01 | - | |
| 002 | OIL PRESSURE GAUGE FOR ALL COMBI INSTRUMENTS |
001 | A 00 054 246 02 | - |
| 003 | TEMPERATURE GAUGE FOR ALL COMBI INSTRUMENTS |
001 | A 00 154 219 05 | - |
| FUEL GAUGE FOR ALL COMBI INSTRUMENTS Replaced by: A 000 542 64 03 |
- | A 00 054 254 03 | - | |
| 004 | FUEL GAUGE FOR ALL COMBI INSTRUMENTS |
001 | A 00 054 264 03 | - |
| 005 | AMPEREMETER 40 AMP. FOR ALL COMBI INSTRUMENTS |
001 | A 00 054 210 24 | - |
| SPEEDOMETER WITH KILOMETER GRADUATION Replaced by: A 002 542 15 06 |
- | A 00 154 284 06 | - | |
| 006 | SPEEDOMETER WITH KILOMETER GRADUATION FOR COMBI INSTRUMENT 189 542 00 01/06 01 |
001 | A 00 254 215 06 | - |
| SPEEDOMETER WITH M.P.H. GRADUATION Replaced by: A 002 542 16 06 |
- | A 00 154 285 06 | - | |
| SPEEDOMETER WITH M.P.H. GRADUATION FOR COMBI INSTRUMENT 189 542 01 01/07 01 |
001 | A 00 254 216 06 | - | |
| SPEEDOMETER WITH KILOMETER GRADUATION Replaced by: A 002 542 17 06 |
- | A 00 154 286 06 | - | |
| SPEEDOMETER WITH KILOMETER GRADUATION FOR COMBI INSTRUMENT 189 542 02 01/08 01 |
001 | A 00 254 217 06 | - | |
| SPEEDOMETER WITH M.P.H. GRADUATION Replaced by: A 002 542 18 06 |
- | A 00 154 287 06 | - | |
| SPEEDOMETER WITH M.P.H. GRADUATION FOR COMBI INSTRUMENT 189 542 03 01/09 01 |
001 | A 00 254 218 06 | - | |
| SPEEDOMETER WITH M.P.H. GRADUATION Replaced by: A 002 542 19 06 |
- | A 00 154 288 06 | - | |
| SPEEDOMETER WITH M.P.H. GRADUATION FOR COMBI INSTRUMENT 189 542 04 01/10 010 |
001 | A 00 254 219 06 | - | |
| SPEEDOMETER WITH KILOMETER GRADUATION Replaced by: A 002 542 20 06 |
- | A 00 254 204 06 | - | |
| SPEEDOMETER WITH KILOMETER GRADUATION FOR COMBI INSTRUMENT 189 542 05 01/11 01 |
001 | A 00 254 220 06 | - | |
| 007 | CONTROL SWITCH | 001 | A 00 054 201 25 | - |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | |
| 009 | LAMP SOCKET | 005 | A 00 054 507 19 | - |
| BULB H 12 V 2 W DIN 72601 |
005 | - | ||
| SPRING WASHER B 5 DIN 137 FOR COMBI INSTRUMENT AT INSTRUMENT PANEL |
002 | - | ||
| CLOCK, ELECTRIC, 12 VOLT UP TO CHASSIS 001692 |
001 | A 18 654 206 11 | - | |
| 012 | CLOCK, ELECTRIC, 12 VOLT FROM CHASSIS 001693 |
001 | A 18 654 208 11 | - |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | |
| 013 | LAMP SOCKET | 001 | A 00 054 507 19 | - |
| BULB H 12 V 2 W DIN 72601 |
001 | - | ||
| SPRING WASHER B 5 DIN 137 FOR CLOCK AT INSTRUMENT PANEL |
002 | - | ||
| WASHER FOR ROTARY SWITCH AND SWITCH FOR SPRING TENSION DEVICE |
NB | A 00 098 717 41 | - | |
| SWITCH FOR SPRING-DRIVE, TORSION BAR UP TO CHASSIS 001692 |
001 | A 00 054 501 67 | - | |
| 014 | SWITCH FOR SPRING-DRIVE, TORSION BAR FROM CHASSIS 001693 |
001 | A 00 054 507 67 | - |
| ROTARY SWITCH FOR HEADLIGHT, FOGLIGHTS AND CLEARANCE LIGHTS UP TO CHASSIS 001692 |
001 | A 12 054 000 58 | - | |
| 015 | PULL SWITCH FOR HEADLIGHT, FOGLIGHTS AND CLEARANCE LIGHTS FROM CHASSIS 001693 |
001 | A 12 854 000 58 | - |
| LENS-HD. SCREW AM 4X6 DIN 85-4 S |
010 | - | ||
| TOOTHED WASHER 4,3 DIN 6797 |
010 | - | ||
Replaced by: A 000 545 06 11 |
- | A 18 654 000 44 | - | |
Replaced by: A 000 545 06 11 |
- | A 18 654 001 44 | - | |
| PUSH-PULL SWITCH FOR 3RD HORN WHICH CAN BE SWITCHED OFF Replaced by: A 000 545 06 11 |
- | A 18 654 001 44 | - | |
| 016 | PUSH-PULL SWITCH FOR 3RD HORN WHICH CAN BE SWITCHED OFF |
001 | A 00 054 506 11 | - |
| WASHER 8,4 DIN 433 |
001 | - | ||
| ESCUTCHEON TO 186 540 00 44 |
001 | A 18 654 503 72 | - | |
| 018 | ESCUTCHEON TO 186 540 01 44 |
001 | A 13 654 506 72 | - |
| 019 | FELT RING | 001 | A 00 099 720 40 | - |
| BUTTON UP TO CHASSIS 001692 |
001 | A 18 654 500 37 | - | |
| 020 | BUTTON FROM CHASSIS 001693 |
001 | A 11 054 006 83 | - |
| 021 | PUSH-PULL SWITCH WITH CONTROL LIGHT SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING |
001 | A 00 054 518 11 | - |
| 022 | ESCUTCHEON SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING |
001 | A 19 854 505 72 | - |
| BUTTON WITH GREEN CONTROL GLASS SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING UP TO CHASSIS 001692 |
001 | A 19 854 504 37 | - | |
| 22a | BUTTON WITH GREEN CONTROL GLASS SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING FROM CHASSIS 001693 |
001 | A 11 054 007 83 | - |
| 22b | WASHER SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING |
001 | A 18 899 006 40 | - |
| WASHER SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING |
NB | A 00 098 408 55 | - | |
| BULB J 12 V 2 W DIN 72601 SWITCH FOR AUXILIARY FUEL PUMP FOR PREHEATING |
001 | - | ||
Replaced by: A 000 545 06 11 |
001 | A 18 654 000 44 | - | |
| PUS-PULL SWITCH FOR DOME LIGHT Replaced by: A 000 545 06 11 |
001 | A 18 954 000 44 | - | |
| 023 | PUS-PULL SWITCH FOR DOME LIGHT |
001 | A 00 054 506 11 | - |
| 024 | ESCUTCHEON | 001 | A 18 654 503 72 | - |
| 025 | FELT RING | 001 | A 00 099 720 40 | - |
| BUTTON UP TO CHASSIS 001692 |
001 | A 18 654 500 37 | - | |
| 026 | BUTTON FROM CHASSIS 001693 |
001 | A 11 054 006 83 | - |
| 027 | DISTANCE LIGHT | 001 | A 00 054 525 15 | - |
| BULB J 12 V 2 W DIN 72601 |
001 | - | ||
| GROMMET FOR CAPILLARY TUBE, TELE-THERMOMETER THROUGH FRONT WALL Replaced by: A 186 997 06 81 |
- | A 18 699 705 81 | - | |
| 029 | GROMMET FOR CAPILLARY TUBE, TELE-THERMOMETER THROUGH FRONT WALL |
001 | A 18 699 706 81 | - |
| 030 | SOCKET FOR HAND LAMP AT BODY FORNT END, INSIDE |
001 | A 00 054 505 25 | - |
| 031 | CABLE BRACKET FOR CAPILLARY TUBE AT HOOD CABLE |
001 | A 00 054 603 43 | - |
| 035 | DISTANCE LIGHT BLINKER SWITCH WITH HORN SIGNAL BLACK UP TO CHASSIS 001692 |
001 | A 00 054 579 24 | - |
| DISTANCE LIGHT BLINKER SWITCH WITH HORN SIGNAL BLACK UP TO CHASSIS 001692 |
001 | A 00 054 578 24 | - | |
| 036 | BLINKER TRANSMITTER, 12 VOLT MAX. LOAD 90 WATT |
001 | A 00 054 423 32 | - |
| LENS-HD. SHEET METAL SCREW BZ 4,2X9,5 DIN 7981 FOR DISTANCE LIGHT BLINKER TRANSMITTER AT FRONT WALL |
002 | - | ||
| SWITCH UP TO CHASSIS 001692 SPECIAL REQUEST FOR CARS WITH ZF-HYDRO STEERING IS NOT APPLICABLE TO CARS TO THE USA FROM CHASSIS 0 Replaced by: A 001 545 03 24 |
- | A 00 054 587 24 | - | |
| 037 | SWITCH UP TO CHASSIS 001692 SPECIAL REQUEST FOR CARS WITH ZF-HYDROSTEERING IS NOT APPLICABLE TO CARS TO THE USA FROM CHASSIS 00 |
001 | A 00 154 503 24 | - |
| 038 | BUTTON, BLACK UP TO CHASSIS 001692 SPECIAL REQUEST FOR CARS WITH ZF-HYDRO STEERING IS NOT APPLICABLE TO CARS TO THE USA FROM CHASSIS 0 |
001 | A 18 054 504 37 | - |
| BUTTON, IVORY COLOURED SPECIAL REQUEST UP TO CHASSIS 001692 SPECIAL REQUEST FOR CARS WITH ZF-HYDRO STEERING IS NOT APPLICABLE TO CARS TO THE US |
001 | A 18 054 505 37 | - | |
| REVERSING SWITCH FROM CHASSIS 7500011 TO 8501106 |
001 | A 00 054 591 24 | - | |
| REVERSING SWITCH FROM CHASSIS 8501107 TO 001692 |
001 | A 00 054 590 24 | - | |
| BLINKER LEVER KNOB, BLACK Replaced by: A 180 545 04 37 |
- | A 18 054 502 37 | - | |
| BLINKER LEVER KNOB, BLACK FROM CHASSIS 7500011 TO 001692 |
001 | A 18 054 504 37 | - | |
| BLINKER LEVER KNOB, IVORY COLOURED SPECIAL REQUEST FROM CHASSIS 7500011 TO 001692 Replaced by: A 180 545 05 37 |
- | A 18 054 503 37 | - | |
| BLINKER LEVER KNOB, IVORY COLOURED SPECIAL REQUEST FROM CHASSIS 7500011 TO 001692 |
001 | A 18 054 505 37 | - | |
| REVERSING SWITCH FROM CHASSIS 001693 |
001 | A 00 054 590 24 | - | |
| BLINKER LEVER KNOB, BLACK FROM CHASSIS 001693 |
001 | A 18 054 504 37 | - | |
| BLINKER LEVER KNOB, IVORY COLOURED SPECIAL REQUEST FROM CHASSIS 001693 |
001 | A 18 054 505 37 | - | |
| CABLE HARNESS FOR DIRECTION INDICATOR BLINKER LIGHT UP TO CHASSIS 8501106 |
001 | A 18 954 008 09 | - | |
| CABLE HARNESS FOR DIRECTION INDICATOR BLINKER LIGHT AND HORN FROM CHASSIS 8501107 TO 001692 |
001 | A 18 954 010 09 | - | |
| ELECTRIC CABLE FOR LIGHTENING OF GEAR SELECTOR INDICATOR FROM CHASSIS 8501107 TO 001692 |
001 | A 18 954 600 02 | - | |
| ELECTRIC CABLE FOR LIGHTENING OF GEAR SELECTOR INDICATOR UP TO CHASSIS 001692 |
001 | A 18 954 600 02 | - | |
| ADDITIONAL CABLE HARNESS FOR DIRECTION INDICATOR BLINKER LIGHT, HORN AND BLINKER LIGHT SYSTEM IS NOT APPLICABLE TO CARS TO THE USA |
001 | A 18 954 011 09 | - | |
| ADDITIONAL CABLE HARNESS FOR DIRECTION INDICATOR BLINKER LIGHT FROM CHASSIS 7500011 TO 001692 |
001 | A 18 954 003 09 | - | |
| ADDITIONAL CABLE HARNESS FROM SLIP RING TO SWITCH UP TO CHASSIS 001692 IS NOT APPLICABLE TO CARS TO THE USA |
001 | A 18 954 012 09 | - | |
| HOSE CLAMP WSN 9 N 262 FOR BLINKER TRANSMITTER CABLE AT JACKET TUBE UP TO CHASSIS 001692 |
001 | - | ||
| HOSE STRAP 9X0,4X330 N 263 ORDER BY THE METER FOR BLINKER TRANSMITTER CABLE AT JACKET TUBE UP TO CHASSIS 001692 |
001 | - | ||
| 044 | OIL PRESSURE GAUGE PIPE | 001 | A 18 954 000 60 | - |
| 045 | OIL PRESSURE GAUGE PIPE | 001 | A 18 954 001 60 | - |
| 046 | INTERMEDIATE PIECE FOR OIL PRESSURE GAUGE PIPE |
001 | A 19 854 200 45 | - |
| 047 | OIL PRESSURE SWITCH IN INTERMEDIATE PIECE |
001 | A 00 054 254 17 | - |
| 048 | HOSE FOR OIL PRESSURE GAUGE PIPE |
001 | A 13 654 002 59 | - |
| RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL, CROSS DUCT, BOTTOM Replaced by: A 000 987 00 32 |
- | A 00 098 709 32 | - | |
| 049 | RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL, CROSS DUCT, BOTTOM ORDER BY THE METER |
002 | A 00 098 700 32 | - |
| 050 | FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL, CROSS DUCT, BOTTOM |
002 | A 13 699 505 01 | - |
| CYLINDR. SHEET METAL SCREW BZ 3,9X9,5 DIN 7971 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL, CROSS DUCT, BOTTOM |
002 | - | ||
| 052 | GROMMET FOR OIL PRESSURE GAUGE PIPE THROUGH FRONT WALL |
001 | A 18 699 706 81 | - |
| LOCK WASHER B 10 DIN 127 FOR FIXING INTERMEDIATE PIECE AT BRACKET, FRONT WALL |
001 | - | ||
| HEX. NUT M 10 DIN 70616-5 S FOR FIXING INTERMEDIATE PIECE AT BRACKET, FRONT WALL |
001 | - | ||
| FLEXIBLE SHAFT, 1,350-MM LONG FOR SPEEDOMETER Replaced by: A 186 542 03 07 |
- | A 18 954 200 07 | - | |
| 054 | FLEXIBLE SHAFT, 1,350-MM LONG FOR SPEEDOMETER |
001 | A 18 654 203 07 | - |
| FLEXIBLE SHAFT, 1,700-MM LONG FOR SPEEDOMETER |
001 | A 18 854 200 07 | - | |
| 057 | FIXING CLAMP FOR FLEXIBLE SHAFT |
001 | A 18 199 500 20 | - |
| CYLINDR. SCREW AM 4X10 DIN 84-4 S FOR FIXING CLAMP AT BRACKET |
001 | - | ||
| LOCK WASHER B 4 DIN 127 FOR FIXING CLAMP AT BRACKET |
001 | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR FIXING CLAMP AT BRACKET |
001 | - | ||
| FIXING CLAMP FOR FLEXIBLE SHAFT |
001 | A 18 199 500 20 | - | |
| LENS.-HD. SCREW AM 5X12 DIN 7985-4 S |
001 | - | ||
| LOCK WASHER B 5 DIN 127 |
001 | - | ||
| HEX. NUT M 5 DIN 934-5 S |
001 | - | ||
| 062 | GROMMET FOR FIXING SPEEDOMETER SHAFT AT BRACKET, EXHAUST TUBE |
001 | A 18 699 704 81 | - |
| FIXING CLAMP AT CLUTCH HOUSING |
001 | A 18 199 500 20 | - | |
| 064 | GROMMET FOR SPEEDOMETER SHAFT THROUGH FRONT WALL |
001 | A 18 399 700 81 | - |
| 066 | FOOT DIMMER SWITCH | 001 | A 00 054 504 12 | - |
| UNDERLAYER FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
001 | A 18 954 501 89 | - | |
| LENS-HD. COUNTERSUNK SCREW AM 5X30 DIN 91-5 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | - | ||
| LENS-HD. COUNTERSUNK SCREW AM 5X35 DIN 91-5 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | - | ||
| 068 | INSULATING PLATE FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
001 | A 13 654 501 58 | - |
| 069 | GROMMET FOR FOOT DIMMER SWITCH THROUGH FRONT WALL |
001 | A 18 699 706 81 | - |
| 070 | STARTER PUSH BUTTON | 001 | A 00 054 507 14 | - |
| 071 | ESCUTCHEON | 001 | A 18 654 502 72 | - |
| 072 | STOP LIGHT SWITCH FOR HYDR. MASTER CYLINDER SEE GROUP 42 |
001 | A 00 054 522 09 | - |
| 075 | 3-ELEMENT VOLTAGE REGULATOR, WITH INTERFERENCE SUPPRESSION Replaced by: A 001 154 04 06 |
- | A 00 015 429 06 | - |
| 075 | 3-ELEMENT VOLTAGE REGULATOR, WITH INTERFERENCE SUPPRESSION SEE GROUP 15 |
001 | A 00 115 404 06 | - |
| 076 | INTERFERENCE SUPPRESSOR | 001 | A 00 015 639 01 | - |
| GROMMET | 002 | A 00 099 700 81 | - | |
| 077 | REGULATOR PLATE | 001 | A 18 954 000 42 | - |
| HEX.-HD. SCREW M 5X35 DIN 931-8 G FOR REGULATOR PLATE AND REGULATOR AT BODY FRONT END |
003 | - | ||
| LOCK WASHER B 5 DIN 127 FOR REGULATOR PLATE AND REGULATOR AT BODY FRONT END |
003 | - | ||
| LENS-HD. COUNTERSUNK SCREW AM 5X15 DIN 88-4 S FOR REGULATOR PLATE AND REGULATOR AT BODY FRONT END |
001 | - | ||
| TOOTHED WASHER A 5,3 DIN 6797 FOR REGULATOR PLATE AND REGULATOR AT BODY FRONT END |
001 | - | ||
| CYLINDR. SCREW AM 5X12 DIN 84-4 S FOR INTERFERENCE SUPPRESSOR AT REGULATOR PLATE |
002 | - | ||
| LOCK WASHER B 5 DIN 127 FOR INTERFERENCE SUPPRESSOR AT REGULATOR PLATE |
002 | - | ||
| 082 | INTERFERENCE SUPPRESSION CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 15 |
001 | A 00 015 629 01 | - |
| 082 | INTERFERENCE SUPPRESSION CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 15 UP TO CHASSIS 8500577 |
001 | A 00 015 629 01 | - |
| INTERFERENCE SUPPRESSION CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 15 |
001 | A 00 015 631 01 | - | |
| INTERFERENCE SUPPRESSION CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 15 UP TO CHASSIS 8500577 |
001 | A 00 015 631 01 | - | |
| INTERFERENCE SUPPRESSION CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 16 FROM CHASSIS 8500578 |
001 | A 00 015 651 01 | - | |
| INTERFERENCE SUPPRESSION CONDENSER OPTIONAL FOR INTERFERENCE SUPPRESSION OF IGNITION COIL, TERMINAL 16 FROM CHASSIS 8500578 |
001 | A 00 015 652 01 | - | |
| 095 | PROTECTIVE CIRCUIT BREAKER 12 V 22 A FOR SPRING DRIVE, TORSION BAR |
001 | A 00 054 511 34 | - |
| 096 | UNDERLAYER FOR OVERLOAD PROTECTIVE CIRCUIT BREAKER AT FRONT WALL |
001 | A 18 654 500 89 | - |
| CYLINDR. SCREW AM 4X12 DIN 84-4 S FOR OVERLOAD PROTECTIVE CIRCUIT BREAKER AT FRONT WALL |
002 | - | ||
| WASHER 4,3 DIN 125 FOR OVERLOAD PROTECTIVE CIRCUIT BREAKER AT FRONT WALL |
002 | - | ||
| LOCK WASHER B 4 DIN 127 FOR OVERLOAD PROTECTIVE CIRCUIT BREAKER AT FRONT WALL |
002 | - | ||
| 100 | SOLENOID SWITCH | 002 | A 00 054 504 67 | - |
| HEX.-HD. SCREW M 6X15 DIN 933-8 G FOR CONTACTOR AT BRACKET, FRAME |
002 | - | ||
| LOCK WASHER B 6 DIN 127 FOR CONTACTOR AT BRACKET, FRAME |
002 | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR CONTACTOR AT BRACKET, FRAME |
002 | - | ||
| CYLINDR. SCREW AM 4X18 DIN 84-4 S FOR CONTACTOR AT BRACKET, FRAME |
008 | - | ||
| LOCK WASHER B 4 DIN 127 FOR CONTACTOR AT BRACKET, FRAME |
008 | - | ||
| 104 | CONNECTING CABLE FROM 1ST TO 2ND SOLENOID SWITCH |
001 | A 18 654 000 38 | - |
| 105 | RUBBER PROTECTIVE CAP | 002 | A 00 054 602 35 | - |
| 106 | IGNITION COIL | 001 | A 00 015 806 03 | - |
| 107 | FIXING CLAMP FOR IGNITION COIL |
001 | A 00 015 802 40 | - |
| CYLINDR. SCREW AM 5X40 DIN 84-4 S FOR FIXING CLAMP |
001 | - | ||
| SQUARE NUT M 5 DIN 562 FOR FIXING CLAMP |
001 | - | ||
| 110 | PRE-RESISTOR FOR IGNITION COIL |
001 | A 00 015 801 45 | - |
| 111 | BRACKET FOR IGNITION COIL, PRE-RESISTOR FROM CHASSIS 8500578 |
001 | A 18 915 800 40 | - |
| CYLINDR, SCREW AM 5X12 DIN 84-4 S FOR PRE-RESISTOR AT BRACKET FROM CHASSIS 8500578 |
002 | - | ||
| LOCK WASHER B 5 DIN 127 FOR PRE-RESISTOR AT BRACKET FROM CHASSIS 8500578 |
002 | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR PRE-RESISTOR AT BRACKET FROM CHASSIS 8500578 |
002 | - | ||
| HEX.-HD. SCREW M 6X15 DIN 933-8 G FOR IGNITION COIL AT AIR DUCT, LEFT |
002 | - | ||
| HEX.-HD. SCREW M 6X15 DIN 933-8 G FOR IGNITION COIL AT AIR DUCT, LEFT UP TO CHASSIS 8500577 |
002 | - | ||
| WASHER A 6,4 DIN 9021 FOR IGNITION COIL AT AIR DUCT, LEFT |
002 | - | ||
| WASHER A 6,4 DIN 9021 FOR IGNITION COIL AT AIR DUCT, LEFT UP TO CHASSIS 8500577 |
002 | - | ||
| LOCK WASHER B 6 DIN 127 FOR IGNITION COIL AT AIR DUCT, LEFT |
002 | - | ||
| LOCK WASHER B 6 DIN 127 FOR IGNITION COIL AT AIR DUCT, LEFT UP TO CHASSIS 8500577 |
002 | - | ||
| HEX.-HD. SCREW M 8X22 DIN 933-8 G FOR IGNITION COIL AT CYLINDER HEAD COVER FROM CHASSIS 8500578 |
002 | - | ||
| WASHER 8,4 DIN 125 FOR IGNITION COIL AT CYLINDER HEAD COVER FROM CHASSIS 8500578 |
002 | - | ||
| LOCK WASHER B 8 DIN 127 FOR IGNITION COIL AT CYLINDER HEAD COVER FROM CHASSIS 8500578 |
002 | - | ||
| 114 | RUBBER PROTECTIVE CAP FOR IGNITION COIL, TERMINALS 1 AND 15 |
002 | A 00 054 602 35 | - |
| BUTTON-HD. SCREW AM4X10 DIN 86-4 S FOR PRE-RESISTOR AT AIR DUCT, LEFT |
002 | - | ||
| BUTTON-HD. SCREW AM4X10 DIN 86-4 S FOR PRE-RESISTOR AT AIR DUCT, LEFT UP TO CHASSIS 8500577 |
002 | - | ||
| LOCK WASHER B 4 DIN 127 FOR PRE-RESISTOR AT AIR DUCT, LEFT |
002 | - | ||
| LOCK WASHER B 4 DIN 127 FOR PRE-RESISTOR AT AIR DUCT, LEFT UP TO CHASSIS 8500577 |
002 | - | ||
| 118 | GROUND CABLE FROM INTERFERENCE SUPPRESSION CONDENSER, IGNITION COIL, TO ENGINE |
001 | A 18 054 001 41 | - |
| 118 | GROUND CABLE FROM INTERFERENCE SUPPRESSION CONDENSER, IGNITION COIL, TO ENGINE UP TO CHASSIS 8500577 |
001 | A 18 054 001 41 | - |
| 119 | CABLE CONNECTOR, 2 POLES FOR SOLENOID VALVE |
001 | A 00 054 618 41 | - |
| CYLINDRICAL TAPPING SCREW BM 4X15 DIN 7513 FOR CABLE CONNECTOR AT FRAME |
002 | - | ||
| HOSE CLAMP S 16/9 ZY N 288A FOR ELECTRIC CABLE TO SOLENOID VALVE |
003 | - | ||
DISC-TYPE HORN |
- | XXX XXX XXX XXXX | - | |
| 125 | LOUD BLAST HORN | 001 | A 00 054 233 20 | - |
| 126 | LOUD BLAST HORN | 001 | A 00 054 234 20 | - |
| LOUD BLAST HORN SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 154 209 20 | - | |
| LOUD BLAST HORN SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 154 210 20 | - | |
| DISC-TYPE HORN Replaced by: A 001 542 23 20 |
- | A 00 054 246 20 | - | |
| 127 | DISC-TYPE HORN | 001 | A 00 154 223 20 | - |
| 128 | CONTACTOR 12 VOLT FOR AUTOMATIC AUXILIARY STARTER DEVICE AND 3-TUNE SIGNAL SYSTEM |
001 | A 00 054 230 19 | - |
| 129 | CONTACTOR 12 VOLT FOR AUTOMATIC AUXILIARY STARTER DEVICE AND 3-TUNE SIGNAL SYSTEM |
001 | A 00 054 229 19 | - |
| 130 | CONTACTOR WITH CONTACT 12 VOLT FOR 3-TUNE SIGNAL SYSTEM |
001 | A 00 054 227 19 | - |
| 131 | CONTACTOR 12 VOLT FOR AUTOMATIC FUEL PUMP |
001 | A 00 054 227 19 | - |
| 132 | BRACKET FOR RELAY FUEL PUMP, HORN |
001 | A 18 954 001 73 | - |
| CLIP NUT FOR RELAY FUEL PUMP, HORN |
002 | A 00 099 404 45 | - | |
| LENS-HD. SHEET METAL SCREW B 4,2X9,5 DIN 7981 FOR RELAY FUEL PUMP, HORN |
002 | - | ||
| 135 | BRACKET AT HEATING DUCT FOR RELAY AUTOMATIC AUXILIARY STARTER DEVICE |
001 | A 18 954 000 73 | - |
| CYLINDR. SCREW AM 5X10 DIN 84-4 S FOR RELAY AUTOMATIC AUXILIARY STARTER DEVICE |
001 | - | ||
| LOCK WASHER B 5 DIN 127 FOR RELAY AUTOMATIC AUXILIARY STARTER DEVICE |
001 | - | ||
| CYLINDR. SCREW AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT HORN |
006 | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN |
006 | - | ||
| HEX.-HD. SCREW M 10X25 DIN 933-8 G FOR HORN AT SUPPORT |
003 | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN AT SUPPORT |
003 | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN AT SUPPORT |
003 | - | ||
| 136 | CONNECTION CABLE FROM 1ST TO 2ND HORN |
001 | A 18 354 000 38 | - |
| CONTACTOR 12 V SPECIAL REQUEST BLINKER SIGNAL SYSTERM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
001 | A 00 054 227 19 | - | |
| ELECTRIC CABLE B 1 DIN 72551 FROM RELAY, TERMINAL 30 TO RELAY, TERMINAL 86 SPECIAL REQUEST BLINKER SIGNAL SYSTERM FOR CARS EXPORTED TO |
001 | - | ||
| CABLE TERMINAL 4X0,8 N 261 SPECIAL REQUEST BLINKER SIGNAL SYSTERM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
005 | - | ||
| GROMMET SPECIAL REQUEST BLINKER SIGNAL SYSTERM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
005 | A 00 099 701 81 | - | |
| RELAY WITH ALTERNATING CONTACT SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY |
001 | A 00 054 229 19 | - | |
| ADDITIONAL CABLE SET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY |
001 | A 18 954 018 09 | - | |
| CABLE CONNECTOR SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY |
001 | A 00 054 645 41 | - | |
| BRACKET FOR RELAY SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY |
001 | A 11 154 504 40 | - | |
| LENS-HD. SCREW AM 4X22 DIN 7985-4 S FOR RELAY TO BRACKET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY |
002 | - | ||
| LOCK WASHER B 4 DIN 127 FOR RELAY TO BRACKET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY |
002 | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR RELAY TO BRACKET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO ITALY |
002 | - | ||
DOUBLE-TONE HORN, SPECIAL REQUEST |
- | XXX XXX XXX XXXX | - | |
| DOUBLE-TONE HORN WITH PROTECTIVE GRILL Replaced by: A 000 542 11 99 |
- | A 00 054 206 99 | - | |
| 140 | DOUBLE-TONE HORN WITH PROTECTIVE GRILL |
001 | A 00 054 211 99 | - |
| CONTACTOR 12 V Replaced by: A 000 542 27 19 |
- | A 00 054 215 19 | - | |
| 141 | CONTACTOR 12 V | 001 | A 00 054 227 19 | - |
| 142 | PUSH-BUTTON SWITCH | 001 | A 00 054 510 11 | - |
| 143 | BRACKET FOR PUSH-BUTTON SWITCH |
001 | A 18 854 202 39 | - |
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7971 FOR BRACKET TO CROSS REINFORCEMENT |
003 | - | ||
| 144 | BRACKET FOR RELAY, HORN SYSTEM |
001 | A 18 954 004 73 | - |
| 145 | ADDITIONAL CABLE HARNESS | 001 | A 18 954 000 09 | - |
| 146 | ADDITIONAL CABLE HARNESS | 001 | A 18 954 001 09 | - |
| 147 | ADDITIONAL CABLE HARNESS | 001 | A 18 954 002 09 | - |
| 150 | SUPPORT, LEFT | 001 | A 18 954 002 73 | - |
| 151 | SUPPORT, RIGHT | 001 | A 18 954 003 73 | - |
| CABLE, 1,300 MM LONG A 1,5 DIN 72551 SW ORDER BY THE METER |
002 | - | ||
| CABLE, 1,300 MM LONG A 1,5 DIN 72551 GN ORDER BY THE METER |
001 | - | ||
| INSULATING HOSE, 1,300-MM LONG B 8X9 SW DIN 40621 ORDER BY THE METER |
001 | - | ||
| CABLE TERMINAL 4X0,8 N 261 |
002 | - | ||
| GROMMET | 002 | A 00 099 700 81 | - | |
| CABLE CONNECTOR, 1-POLE | 001 | A 00 054 645 41 | - | |
| HEX.-HD. SCREW M 10X35 DIN 933-10 K FOR SUPPORT TO BUMPER |
002 | - | ||
| HEX.-HD. SCREW M 8X18 DIN 933-10 K FOR SUPPORT TO BUMPER |
002 | - | ||
| LOCK WASHER B 8 DIN 127 FOR SUPPORT TO BUMPER |
002 | - | ||
| HEX. NUT M 8 DIN 934-5 S FOR SUPPORT TO BUMPER |
002 | - | ||
| HEX.-HD. SCREW M 10X100 DIN 931-8 G VERCHROMT FOR HORN TO SUPPORT |
002 | - | ||
| LOCK WASHER B 10 DIN 127 VERCHROMT FOR HORN TO SUPPORT |
002 | - | ||
| 157 | INTERMEDIATE FITTING FOR HORN TO SUPPORT |
002 | A 18 954 200 38 | - |
| 158 | WASHER FOR HORN TO SUPPORT |
002 | A 18 999 000 40 | - |
| FIXING CLAMP | 003 | A 18 699 502 20 | - | |
| CYLINDRICAL SCREW AM 5X12 DIN 84-4 S |
002 | - | ||
| ADDITIONAL CABLE HARNESS UP TO CHASSIS 001692 SPECIAL REQUEST FOGLIGHT SWITCHING FOR CARS EXPORTED TO THE USA |
001 | A 18 054 006 09 | - | |
| ADDITIONAL CABLE HARNESS FROM CHASSIS 001693 SPECIAL REQUEST FOGLIGHT SWITCHING FOR CARS EXPORTED TO THE USA |
001 | A 12 854 004 09 | - | |
| INSULATING HOSE, 100-MM LONG B 20X22,4 SW DIN40621 OVER MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER SPECIAL REQUEST FOGLIG |
001 | - | ||
| FUSE BOX, 2-POLES SPECIAL REQUEST FOGLIGHT SWITCHING FOR CARS EXPORTED TO THE USA |
001 | A 00 054 503 01 | - | |
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 SPECIAL REQUEST FOGLIGHT SWITCHING FOR CARS EXPORTED TO THE USA |
002 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy