SPRINGS AND SUSPENSION

EPC / Mercedes / 1 / FG / FG 189.010 / 32 / 025
‹ ›

№- Name A* Part number A

REAR SPRING 		- XXX XXX XXX XXXX -
001 REAR SPRING
WIRE DIA. 17.8 MM 		002 A 18 632 421 04  -
REAR SPRING
WIRE DIA. 17.5 MM EXPORT, SPECIAL REQUEST FOR BAD ROADS 		002 A 18 632 414 04  -
002 SPRING CLAMP, BOTTOM 002 A 15 332 001 66  -
003 BRACKET
FOR RUBBER BUFFER 		002 A 15 332 500 43  -
004 RUBBER BUFFER, BOTTOM 002 A 13 632 504 44  -
005 LOCK WASHER
B 14 DIN 127 FOR SPRING CLAMP AND RUBBER BUFFER AT REAR AXLE TUBE 		002 -
006 NUT
FOR REAR SPRING MOUNTING FOR SPRING CLAMP AND RUBBER BUFFER AT REAR AXLE TUBE 		002 A 15 332 501 72  -
007 STOP PIECE 002 A 13 632 505 31  -
008 LOCK WASHER
B 14 DIN 127 		002 -
009 SPRING RETAINER 002 A 15 332 500 15  -
010 AUXILIARY SPRING 002 A 18 332 400 07  -
011 SHIM, 2 MM THICK
OPTIONAL 		NB A 15 332 500 52  -
SHIM, 4 MM THICK
OPTIONAL 		NB A 15 332 501 52  -
012 SPRING CLAMP, TOP 002 A 13 632 505 25  -
013 SHIM, 4 MM THICK
OPTIONAL FOR REAR SPRING AT FRAME 		NB A 13 632 500 84  -
SHIM, 2 MM THICK
OPTIONAL FOR REAR SPRING AT FRAME 		NB A 13 632 501 84  -
014 FIXING PLATE
FOR REAR SPRING MOUNTING, TOP 		002 A 18 632 002 24  -
015 RUBBER BUFFER
FOR REAR SPRING SUPPORT, TOP 		002 A 18 632 501 44  -
016 FIXING PIN
FOR REAR SPRING, TOP 		002 A 18 632 502 74  -

SHOCK ABSORBER, REAR 		- XXX XXX XXX XXXX -
017 SHOCK ABSORBER, REAR 002 A 00 032 664 00  -
018 EYE 002 A 00 032 300 20  -
019 BELLOWS 002 A 00 032 300 92  -
020 RUBBER RING 004 A 00 032 313 85  -

EXPORT, SPECIAL REQUEST FOR BAD ROADS
Replaced by: A  000 326 81 00 		- A 00 032 644 00  -
JOINT RUBBER, BOTTOM
EXPORT, SPECIAL REQUEST FOR BAD ROADS 		002 A 00 032 301 85  -
JOINT RUBBER, TOP
EXPORT, SPECIAL REQUEST FOR BAD ROADS 		002 A 00 032 308 85  -
JOINT BUSHING, BOTTOM
EXPORT, SPECIAL REQUEST FOR BAD ROADS 		002 A 00 032 303 53  -
JOINT BUSHING, TOP
EXPORT, SPECIAL REQUEST FOR BAD ROADS 		002 A 00 032 306 53  -
021 SHOCK ABSORBER, REAR
EXPORT, SPECIAL REQUEST FOR BAD ROADS 		002 A 00 032 681 00  -
022 WASHER
FOR SHOCK ABSORBER AT SPRING SUPPORT, TOP 		004 A 18 899 000 42  -
023 HEX.-HD. SCREW M 14X1,5
FOR SHOCK ABSORBER AT SPRING SUPPORT, TOP 		002 A 18 699 002 02  -
024 CASTLE NUT
M 14X1,5 DIN 935-5 S FOR SHOCK ABSORBER AT SPRING SUPPORT, TOP 		002 -
025 COTTER PIN
3X25 DIN 94 FOR SHOCK ABSORBER AT SPRING SUPPORT, TOP 		002 -
028 SPACER SLEEVE
FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 A 18 699 145 40  -
029 WASHER
FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 A 18 699 017 40  -
030 WASHER
15 DIN 125 FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 -
031 CASTLE NUT
M 14X1,5 DIN 935-5 S FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 -
032 COTTER PIN
3X28 DIN 94 FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 -

STRAP 		- XXX XXX XXX XXXX -
033 STRAP
FOR REAR AXLE 		002 A 18 832 001 25  -
034 RUBBER BUFFER 002 A 15 332 501 44  -
035 HEX. -HD. SCREW
M 12X90 DIN 931-8 G FOR STRAP AT REAR SPRING SUPPORT OR CROSS MEMBER RESP. 		002 -
036 LOCK WASHER
B 12 DIN 127 FOR STRAP AT REAR SPRING SUPPORT OR CROSS MEMBER RESP. 		002 -
037 HEX. NUT
M 12 DIN 934-5 S FOR STRAP AT REAR SPRING SUPPORT OR CROSS MEMBER RESP. 		002 -

TORSION BAR FOR REAR SPRINGS 		- XXX XXX XXX XXXX -
040 TORSION BAR
FOR REAR SPRINGS 		002 A 18 632 607 65  -
041 BOGE SILENT BLOCK 002 A 18 632 002 47  -
042 LEVER, LEFT, FRONT
FOR TORSION BAR 		001 A 18 632 006 27  -
043 LEVER, RIGHT, FRONT
FOR TORSION BAR 		001 A 18 632 007 27  -
044 ROLLER WITH BUSHING
IN LEVER, FRONT 		002 A 18 632 000 88  -
045 BUSHING
FOR ROLLER 		002 A 18 632 600 50  -
046 PIN
FOR ROLLER IN LEVER, FRONT 		002 A 18 632 604 74  -
047 WASHER
FOR ROLLER IN LEVER, FRONT 		004 A 18 632 600 52  -
048 LOCKING RING
12X1 DIN 471 FOR ROLLER IN LEVER, FRONT 		002 -
049 ADJUSTING SLEEVE
FOR TORSION BAR, FRONT 		002 A 18 632 600 54  -
050 HEX. -HD. SCREW
M 10X50 DIN 931-8 G FOR LEVER, FRONT, AT TORSION BAR 		002 -
051 LOCK WASHER
B 10 DIN 127 FOR LEVER, FRONT, AT TORSION BAR 		002 -
052 HEX. NUT
M 10 DIN 934-5 S FOR LEVER, FRONT, AT TORSION BAR 		002 -
053 RUBBER MOUNTING 002 A 18 632 601 68  -
054 TIGHTENING PLATE 002 A 18 632 600 76  -
055 TIGHTENING PLATE 002 A 18 632 601 76  -
056 MOUNTING CUP
FOR REAR TORSION BAR MOUNTING 		002 A 18 632 603 60  -
057 FRONT MOUNTING CUP 002 A 18 632 002 73  -
058 HEX. -HD. SCREW
M 8X15 DIN 933-8 G FOR MOUNTING HOUSING AT BRACKET, FRAME 		004 -
059 LOCK WASHER
B 8 DIN 127 FOR MOUNTING HOUSING AT BRACKET, FRAME 		010 -
060 HEX. -HD. SCREW
M 8X22 DIN 933-8 G FOR MOUNTING HOUSING AT BRACKET, FRAME 		006 -
061 SHIM, 1 MM THICK
OPTIONAL FOR MOUNTING HOUSING AT BRACKET, FRAME 		NB A 18 632 600 96  -
SHIM, 2 MM THICK
OPTIONAL FOR MOUNTING HOUSING AT BRACKET, FRAME 		NB A 18 632 601 96  -
SHIM, 3 MM THICK
OPTIONAL FOR MOUNTING HOUSING AT BRACKET, FRAME 		NB A 18 632 602 96  -
SHIM, 4 MM THICK
OPTIONAL FOR MOUNTING HOUSING AT BRACKET, FRAME 		NB A 18 632 603 96  -
SHIM, 5 MM THICK
OPTIONAL FOR MOUNTING HOUSING AT BRACKET, FRAME 		NB A 18 632 604 96  -
SHIM, 6 MM THICK
OPTIONAL FOR MOUNTING HOUSING AT BRACKET, FRAME 		NB A 18 632 605 96  -
064 HEX. -HD. SCREW
M 10X25 DIN 933-8 G FOR RUBBER MOUNTING AT TORSION BAR 		002 -
065 LOCK WASHER
B 10 DIN 127 FOR RUBBER MOUNTING AT TORSION BAR 		002 -
066 WASHER
FOR RUBBER MOUNTING AT TORSION BAR 		002 A 18 699 020 40  -

TORSION BAR LEVER AT REAR AXLE TUBE 		- XXX XXX XXX XXXX -
068 LEVER
FOR TORSION BAR, REAR 		002 A 18 632 610 69  -
069 HEX. -HD. SCREW
M 10X35 DIN 931-8 G FOR LEVER AT TORSION BAR, REAR 		002 -
070 LOCK WASHER
B 10 DIN 127 FOR LEVER AT TORSION BAR, REAR 		002 -
072 CONNECTING ROD
FOR TORSION BAR LEVER 		002 A 18 632 601 16  -
073 RUBBER BUFFER
FOR LEVER, REAR TORSION BAR, AT CONNECTING ROD 		004 A 15 932 300 44  -
074 RETAINER
FOR LEVER, REAR TORSION BAR, AT CONNECTING ROD 		004 A 15 932 300 67  -
075 HEX. NUT
M 10 DIN 934-5 S FOR LEVER, REAR TORSION BAR, AT CONNECTING ROD 		008 -
076 RUBBER MOUNTING
FOR CONNECTING ROD 		002 A 18 632 000 68  -
077 HEX. -HD. SCREW
M 14X1,5X68 S DIN 960-8 G FOR RUBBER MOUNTING AT PIN, REAR AXLE TUBE OR THRUST ARM RESP. 		002 -
078 CASTLE NUT
M 14X1,5 DIN 935-5 S FOR RUBBER MOUNTING AT PIN, REAR AXLE TUBE OR THRUST ARM RESP. 		002 -
079 COTTER PIN
3X28 DIN 94 FOR RUBBER MOUNTING AT PIN, REAR AXLE TUBE OR THRUST ARM RESP. 		002 -

ENGAGING MECHANISM FOR REAR TORSION BAR SPRINGING 		- XXX XXX XXX XXXX -
085 ENGAGING MECHANISM 001 A 18 632 003 12  -
086 HOUSING WITH COVER 001 A 18 632 006 83  -
087 BUSHING
FOR HOUSING 		001 A 18 632 604 50  -
088 BUSHING 002 A 18 632 605 50  -
089 WASHER 002 A 18 699 701 25  -
090 LOCKING WASHER 002 B 15 N 59 5N59a -
BUSHING
FOR COVER 		001 A 18 632 604 50  -
BUSHING
FOR COVER 		002 A 18 632 605 50  -
WASHER
FOR COVER 		001 A 18 699 701 25  -
LOCKING WASHER
FOR COVER 		001 B 15 N 59 5N59a -
091 SETSCREW
FOR COVER AT HOUSING, ENGAGING MECHANISM 		001 A 18 632 601 71  -
092 SPRING WASHER
B 8 DIN 137 FOR COVER AT HOUSING, ENGAGING MECHANISM 		005 -
093 HEX. NUT
M 8 DIN 934-5 S FOR COVER AT HOUSING, ENGAGING MECHANISM 		004 -
094 HEX. NUT
M 8 DIN 936-5 S FOR COVER AT HOUSING, ENGAGING MECHANISM 		001 -
095 SHIM, 1.2 MM THICK
OPTIONAL 		002 A 18 632 600 62  -
SHIM, 1.3 MM THICK
OPTIONAL 		002 A 18 632 601 62  -
SHIM, 1.4 MM THICK
OPTIONAL 		002 A 18 632 602 62  -
SHIM, 1.5 MM THICK
OPTIONAL 		002 A 18 632 603 62  -
SHIM, 1.6 MM THICK
OPTIONAL 		002 A 18 632 604 62  -
SHIM, 1.7 MM THICK
OPTIONAL 		002 A 18 632 605 62  -
SHIM, 1.8 MM THICK
OPTIONAL 		002 A 18 632 606 62  -
096 ENGAGING NUT 001 A 18 632 000 87  -
097 SPUR GEAR
FOR ENGAGING NUT 		001 A 18 632 601 34  -
098 LOCKING PLATE 003 A 18 699 401 25  -
099 HEX. -HD. SCREW
M 6X18 DIN 933-8 G 		006 -
100 INTERMEDIATE GEAR
AND INTERMEDIATE PINION 		001 A 18 632 001 86  -
101 DRIVE PINION 001 A 18 632 601 37  -
102 THRUST SPINDLE, 001 A 18 632 004 85  -
103 PRESSURE SPRING 001 A 18 699 353 01  -
104 THRUST SPINDLE,
HOUSING SIDE 		001 A 18 632 006 85  -
105 RUBBER SLEEVE
FOR THRUST SPINDLE 		002 A 18 632 602 92  -
106 SNAP RING
38 DIN 9045 		004 -
107 MOTOR, 12 V 200 W 001 A 00 054 501 65  -
108 CARBON BRUSH
FOR MOTOR 		001 A 00 015 409 14  -
109 SPRING
FOR CARBON BRUSH 		001 A 00 015 403 93  -
110 SWITCHING DEVICE 001 A 00 054 500 68  -
111 HEX. -HD. SCREW
FOR MOTOR WITH SWITCHING DEVICE AT HOUSING COVER 		004 A 18 699 007 01  -
112 WASHER
8,4 DIN 125 FOR MOTOR WITH SWITCHING DEVICE AT HOUSING COVER 		004 -
113 CASTLE NUT
M 8 DIN 937-5 S FOR MOTOR WITH SWITCHING DEVICE AT HOUSING COVER 		004 -
114 COTTER PIN
2X18 DIN 94 FOR MOTOR WITH SWITCHING DEVICE AT HOUSING COVER 		004 -
120 HEX. -HD. SCREW
M 12 X 1,5 X 45 DIN 961-8 G FOR ENGAGING MECHANISM AT SUPPORT, FRAME 		002 -
121 LOCK WASHER
B 12 DIN 127 FOR ENGAGING MECHANISM AT SUPPORT, FRAME 		002 -
122 WASHER
FOR ENGAGING MECHANISM AT SUPPORT, FRAME 		002 A 18 632 611 52  -
123 SPACER SLEEVE
FOR ENGAGING MECHANISM AT SUPPORT, FRAME 		002 A 18 632 607 53  -
124 RUBBER RING
FOR ENGAGING MECHANISM AT SUPPORT, FRAME 		004 A 18 632 603 81  -
125 RUBBER BUSHING
FOR PIVOT PIN 		001 A 18 632 604 81  -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA