CONTROL

EPC / Mercedes / 1 / FG / FG 189.010 / 30 / 022
‹ ›

№- Name A* Part number A

ACCELERATOR PEDAL 		- XXX XXX XXX XXXX -
001 ACCELERATOR PEDAL 001 A 18 630 107 01  -
002 ACCELERATOR PEDAL 001 A 18 630 008 16  -
003 RUBBER ROLLER 001 A 18 630 102 11  -
004 PIN 001 A 18 630 101 73  -
005 WASHER
8,4 DIN 125 		002 -
006 LOCKING WASHER
7 DIN 6799 		002 -
007 RUBBER GROMMET
FOR ACCELERATOR PEDAL 		001 A 18 399 700 81  -
SUPPORT
FOR CONTROL SHAFT
Replaced by: A  186 301 00 18 		- A 18 630 101 18  -
008 SUPPORT
FOR CONTROL SHAFT 		002 A 18 630 100 18  -
SUPPORT
FOR CONTROL SHAFT 		002 A 18 930 100 18  -
010 FLEXIBLE PULL ROD
FOR KICK-DOWN 		001 A 18 627 007 54  -
011 FLEXIBLE PULL ROD
FOR KICK-DOWN 		001 A 18 627 009 54  -
012 PULL ROD 001 A 18 630 007 15  -
BUSHING
Replaced by: A  000 992 00 10 		- A 18 626 001 50  -
12a BUSHING 001 A 00 099 200 10  -
013 BALL SOCKET
B 8 DIN 71805 		001 -
014 HEX. NUT
M 5 DIN 934-5 S 		002 -
FLEXIBLE STOP
FOR KICK-DOWN
Replaced by: A  189 300 00 41 		- A 18 630 002 41  -
015 FLEXIBLE STOP
FOR KICK-DOWN 		001 A 18 930 000 41  -
016 SEALING RING 001 A 00 099 721 41  -
017 SNAP RING
12 DIN 9045 		001 -
018 PLUG
FOR KICK-DOWN 		001 A 18 630 002 74  -

Replaced by: A  186 993 01 01 		- A 18 699 384 01  -
019 PRESSURE SPRING
FOR STOP, KICK-DOWN 		001 A 18 999 301 01  -
020 WASHER
FOR KICK-DOWN 		001 A 18 699 704 25  -
021 LOCKING RING
14X1 DIN 472 		001 -
PRESSURE SPRING
Replaced by: A  189 993 02 01 		- A 18 699 383 01  -
022 PRESSURE SPRING 001 A 18 999 302 01  -
023 BALL
4 MM III DIN 5401 		002 -
024 FLANGE FOR TWO SCREWS 001 A 18 699 702 50  -
025 HEX. NUT 001 A 18 699 004 51  -
026 HEX.-HD. SCREW
M 6X15 DIN 933-8 G FOR FLEXIBLE STOP AT FRONT WALL 		002 -
027 HEX.-HD. SCREW
M 6X20 DIN 933-8 G FOR FLEXIBLE STOP AT FRONT WALL 		002 -
028 SPRING WASHER
B 6 DIN 137 FOR FLEXIBLE STOP AT FRONT WALL 		002 -
029 FLANGE FOR TWO SCREWS
INTERMEDIATE LAYER FOR KICK-DOWN 		001 A 18 699 703 50  -
030 LEVER
FOR KICK-DOWN 		001 A 18 630 009 25  -
031 HEX.-HD. SCREW
M 6X22 DIN 933-8 G FOR LEVER, KICK-DOWN, AT SHAFT, ACCELERATOR PEDAL 		001 -
032 LOCK WASHER
B 6 DIN 127 FOR LEVER, KICK-DOWN, AT SHAFT, ACCELERATOR PEDAL 		001 -
033 SPACER SLEEVE
INSTEAD OF LEVER, KICK-DOWN 		001 A 18 630 101 53  -
034 SPRING WASHER
8 N 55 A FOR PULL ROD AT LEVER, ACCELERATOR PEDAL 		001 -
035 WASHER
FOR PULL ROD AT LEVER, ACCELERATOR PEDAL 		001 A 18 399 042 40  -
036 COTTER PIN
2X25 DIN 94 FOR PULL ROD AT LEVER, ACCELERATOR PEDAL 		001 -
040 CONTROL LEVER 001 A 18 930 000 25  -
041 WOODRUFF KEY
3X3,7 DIN 6888 FOR CONTROL LEVER AT CONTROL SHAFT 		001 -
042 LOCK WASHER
B 6 DIN 127 FOR CONTROL LEVER AT CONTROL SHAFT 		001 -
043 HEX.-HD. SCREW
M 6X28 DIN 931-8 G FOR CONTROL LEVER AT CONTROL SHAFT 		001 -
044 WASHER
13 DIN 433 FOR SUPPORT AT CONTROL SHAFT 		001 -
045 COTTER PIN
2X18 DIN 94 FOR SUPPORT AT CONTROL SHAFT 		001 -
046 HUB
FOR SUPPORT AT ACCELERATOR PEDAL 		001 A 18 630 100 51  -
047 RESTORING SPRING
FOR SUPPORT AT ACCELERATOR PEDAL 		001 A 18 699 309 20  -
RESTORING SPRING
FOR SUPPORT AT ACCELERATOR PEDAL
Replaced by: A  189 993 00 20 		- A 18 699 308 20  -
048 RESTORING SPRING
FOR SUPPORT AT ACCELERATOR PEDAL 		001 A 18 999 300 20  -
049 CONTROL SHAFT
WITH CONTROL LEVER 		001 A 18 930 000 20  -
050 CONTROL SHAFT 001 A 18 930 101 19  -
051 FIXING SCREW
FOR HUB AT CONTROL SHAFT 		001 A 18 099 000 17  -
052 HEX. NUT
M 6 DIN 934-5 S FOR HUB AT CONTROL SHAFT 		001 -
053 SPACER SLEEVE
FOR ACCELERATOR PEDAL AT CONTROL SHAFT 		001 A 18 630 102 51  -
054 GROMMET
FOR ACCELERATOR PEDAL AT CONTROL SHAFT 		001 A 18 399 700 81  -
54a WOODRUFF KEY
3X3,7 DIN 6888 FOR ACCELERATOR PEDAL AT CONTROL SHAFT 		001 -
055 HEX.-HD. SCREW
M 6X28 DIN 933-8 G FOR ACCELERATOR PEDAL AT CONTROL SHAFT 		001 -
056 LOCK WASHER
B 6 DIN 127 FOR ACCELERATOR PEDAL AT CONTROL SHAFT 		001 -
057 HEX. NUT
M 6 DIN 934-5 S FOR ACCELERATOR PEDAL AT CONTROL SHAFT 		001 -
058 HEX.-HD. SCREW
M 6X25 DIN 933-8 G FOR CONTROL SHAFT WITH BEARING AT FRONT WALL 		002 -
HEX.-HD. SCREW
M 6X20 DIN 933-8 G FOR CONTROL SHAFT WITH BEARING AT FRONT WALL 		002 -
059 HEX.-HD. SCREW
M 6X40 DIN 933-8 G FOR CONTROL SHAFT WITH BEARING AT FRONT WALL 		002 -
060 SPRING WASHER
B 6 DIN 137 FOR CONTROL SHAFT WITH BEARING AT FRONT WALL 		004 -
065 PULL ROD 001 A 18 930 002 15  -
066 PULL ROD 001 A 18 630 007 15  -
067 PULL ROD 001 A 18 930 003 15  -
BUSHING
Replaced by: A  000 992 00 10 		- A 18 626 001 50  -
068 BUSHING 001 A 00 099 200 10  -
069 PULL ROD
5X310X25/45 N 331 		001 -
070 HEX. NUT
M 5 DIN 934-5 S 		004 -
070 HEX. NUT
M 5 DIN 934-5 S 		001 -
071 BALL SOCKET 001 A 12 730 000 86  -
072 SNAP RING
R 8 DIN 71805 		001 -
073 HEX. NUT 001 A 18 999 000 51  -
074 WASHER
FOR PULL ROD AT CONTROL LEVER 		001 A 18 399 042 40  -
075 SPRING WASHER
8 N 55 A FOR PULL ROD AT CONTROL LEVER 		001 -
076 COTTER PIN
2X15 DIN 94 FOR PULL ROD AT CONTROL LEVER 		001 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA