SPRINGS AND SUSPENSION

EPC / Mercedes / 1 / FG / FG 188.015 / 32 / 017
‹ ›

№- Name A* Part number A

FRONT SPRING 		- XXX XXX XXX XXXX -
001 FRONT SPRING 002 A 18 832 102 04  -
001 FRONT SPRING
INSTALLATION HEIGHT 218 - 221-MM IDENTIFICATION COLOUR = WHITE WITH NORMAL LOAD 		002 A 18 832 102 04  -
001 FRONT SPRING
INSTALLATION HEIGHT 221 - 224-MM IDENTIFICATION COLOUR RED WITH NORMAL LOAD 		002 A 18 832 102 04  -
001 FRONT SPRING
INSTALLATION HEIGHT 224 - 227-MM IDENTIFICATION COLOUR BLUE WITH NORMAL LOAD 		002 A 18 832 102 04  -
001 FRONT SPRING
SPRINGS OF THE SAME COLOUR ARE TO BE INSTALLED IN EVERY CAR 2 		- A 18 832 102 04  -
002 RUBBER BUFFER
FOR SPRING RETAINER, BOTTOM 		004 A 18 633 300 65  -
003 SPRING RETAINER, 001 A 18 632 004 26  -
004 SPRING RETAINER, 001 A 18 632 005 26  -
005 HEX. -HD. SCREW
M 10X55 DIN 931-10 K FOR SPRING RETAINER AT WISHBONE ARM 		004 -
006 WASHER
FOR SPRING RETAINER AT WISHBONE ARM 		004 A 18 699 015 40  -
007 LOCK WASHER
B 10 DIN 127 FOR SPRING RETAINER AT WISHBONE ARM 		004 -
008 HEX. NUT
M 10 DIN 934-5 S FOR SPRING RETAINER AT WISHBONE ARM 		004 -
009 HEX. -HD. SCREW
FOR SPRING RETAINER AT WISHBONE ARM 		004 A 18 699 008 01  -
010 WASHER
FOR SPRING RETAINER AT WISHBONE ARM 		004 A 18 699 016 40  -
011 LOCK WASHER
B 12 DIN 127 FOR SPRING RETAINER AT WISHBONE ARM 		004 -
012 HEX. NUT
M 12X1,5 DIN 934-5 S FOR SPRING RETAINER AT WISHBONE ARM 		004 -

TORSION BAR 		- XXX XXX XXX XXXX -
015 TORSION BAR
FOR FRONT SPRING 		001 A 18 632 107 07  -
016 RUBBER MOUNTING 002 A 18 632 304 85  -
017 CLAMP 002 A 18 632 301 84  -
018 LOCK WASHER
B 10 DIN 127 FOR TORSION BAR AT FRAME, MUDGUARD SUPPORT 		004 -
019 HEX. NUT
M 10 DIN 934-5 S FOR TORSION BAR AT FRAME, MUDGUARD SUPPORT 		004 -
020 RUBBER BUFFER
FOR TORSION BAR AT SPRING RETAINER 		008 A 15 932 300 44  -
021 SEAT
FOR TORSION BAR AT SPRING RETAINER 		008 A 15 932 300 67  -
022 SPACER TUBE
FOR TORSION BAR AT SPRING RETAINER 		002 A 18 699 132 40  -
023 HEX. -HD. SCREW
M 10X170 DIN 931-8 G FOR TORSION BAR AT SPRING RETAINER 		002 -
024 HEX. NUT
M 10 DIN 934-5 S FOR TORSION BAR AT SPRING RETAINER 		004 -

SHOCK ABSORBER, FRONT 		- XXX XXX XXX XXXX -
025 SHOCK ABSORBER, FRONT 002 A 00 032 355 00  -
026 RUBBER SLEEVE
FOR SHOCK ABSORBER, BOTTOM FOR SHOCK ABSORBER MOUNTING AT SPRING RETAINER, BOTTOM 		002 A 00 032 301 85  -
027 JOINT BUSHING, SHORT
FOR SHOCK ABSORBER MOUNTING AT SPRING RETAINER, BOTTOM 		002 A 00 032 303 53  -
028 SPACER TUBE
FOR SHOCK ABSORBER, FRONT AT SPRING RETAINER, TOP 		002 A 00 032 300 53  -
029 RUBBER RING
FOR SHOCK ABSORBER, FRONT AT SPRING RETAINER, TOP 		004 A 00 032 300 85  -
030 CUP WASHER
WITH LARGE BORE FOR SHOCK ABSORBER, FRONT AT SPRING RETAINER, TOP 		002 A 00 032 301 62  -
031 CUP WASHER
WITH SMALL BORE FOR SHOCK ABSORBER, FRONT AT SPRING RETAINER, TOP 		002 A 00 032 300 62  -
032 LOCK WASHER
B 12 DIN 127 FOR SHOCK ABSORBER, FRONT AT SPRING RETAINER, TOP 		002 -
033 HEX. NUT
M 12X1,5 DIN 934-5 S FOR SHOCK ABSORBER, FRONT AT SPRING RETAINER, TOP 		002 -
034 CLAMP
FOR SHOCK ABSORBER MOUNTING 		002 A 18 632 000 45  -
035 SPACER SLEEVE
FOR SHOCK ABSORBER MOUNTING AT SPRING RETAINER, BOTTOM 		008 A 18 499 103 40  -
036 LOCK WASHER
B 8 DIN 127 FOR SHOCK ABSORBER MOUNTING AT SPRING RETAINER, BOTTOM 		008 -
037 HEX. NUT
M 8 DIN 934-5 S FOR SHOCK ABSORBER MOUNTING AT SPRING RETAINER, BOTTOM 		008 -
038 HEX. -HD. SCREW
FOR SHOCK ABSORBER AT CLAMP 		002 A 18 432 301 71  -
039 LOCK WASHER
B 14 DIN 127 FOR SHOCK ABSORBER AT CLAMP 		002 -
040 HEX. NUT
M 14X1,5 DIN 936-5 S FOR SHOCK ABSORBER AT CLAMP 		002 -

REAR SPRING 		- XXX XXX XXX XXXX -
050 REAR SPRING 002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 16-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: WH 		002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 14-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: WH 		002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 12-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: WH 		002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 10-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: RE 		002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 8-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: RED 		002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 6-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: RED 		002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 4-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: BLU 		002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 2-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: BLU 		002 A 18 832 404 04  -
050 REAR SPRING
WHEN INSTALLING THE REAR SPRING THE TOTAL HEIGHT OF THE SHIMS IS: 0-MM WITH THE COLOUR IDENTIFICATION OF THE SPRING: BLU 		002 A 18 832 404 04  -
050 REAR SPRING
THE DIFFERENCE OF HEIGHT IS ATTAINED BY MEANS OF THE CHIMS: 136 325 00 84 = 4-MM 		002 A 18 832 404 04  -
050 REAR SPRING
THE DIFFERENCE OF HEIGHT IS ATTAINED BY MEANS OF THE CHIMS: 136 325 01 84 = 2-MM 		002 A 18 832 404 04  -
051 SPRING CLIP, BOTTOM
FOR REAR SPRING AT SUPPORTING TUBE 		002 A 15 332 001 66  -
052 BRACKET
FOR RUBBER BUFFER 		002 A 15 332 500 43  -
053 RUBBER BUFFER, BOTTOM 002 A 13 632 504 44  -
054 LOCK WASHER
B 14 DIN 127 FOR SPRING CLIP AND RUBBER BUFFER AT SUPPORTING TUBE 		002 -
055 NUT
FOR SPRING CLIP AND RUBBER BUFFER AT SUPPORTING TUBE 		002 A 15 332 501 72  -
056 STOP PIECE 002 A 13 632 505 31  -
057 LOCK WASHER
B 14 DIN 127 		002 -
058 SPRING RETAINER 002 A 15 332 500 15  -
059 AUXILIARY SPRING 002 A 18 332 400 07  -
060 SPACER 2 MM THICK
OPTIONAL FOR AUXILIARY SPRING 		NB A 15 332 500 52  -
SPACER 4 MM THICK
OPTIONAL FOR AUXILIARY SPRING 		NB A 15 332 501 52  -
061 SPRING CLIP, TOP 002 A 13 632 505 25  -
062 SHIM 4 MM THICK
OPTIONAL FOR REAR SPRING AT FRAME 		NB A 13 632 500 84  -
SHIM 2 MM THICK
OPTIONAL FOR REAR SPRING AT FRAME 		NB A 13 632 501 84  -
063 MOUNTING PLATE
FOR REAR SPRING MOUNTING, TOP 		002 A 18 632 002 24  -
064 RUBBER BUFFER, TOP 002 A 18 632 501 44  -
065 MOUNTING PIN 002 A 18 632 502 74  -

SHOCK ABSORBER, REAR 		- XXX XXX XXX XXXX -
070 SHOCK ABSORBER, REAR 002 A 00 032 644 00  -
071 JOINT RUBBER, BOTTOM 002 A 00 032 301 85  -
072 JOINT RUBBER, TOP 002 A 00 032 308 85  -
073 JOINT BUSHING, BOTTOM 002 A 00 032 303 53  -
074 JOINT BUSHING, TOP 002 A 00 032 306 53  -
075 WASHER
FOR SHOCK ABSORBER AT SPRING SUPPORT, TOP 		004 A 18 899 000 42  -
076 HEX. -HD. SCREW
FOR SHOCK ABSORBER AT SPRING SUPPORT, TOP 		002 A 18 699 002 02  -
077 CASTLE NUT
M 14X1, 5 DIN 935-5 S FOR SHOCK ABSORBER AT SPRING SUPPORT, TOP 		002 -
078 COTTER PIN
3X25 DIN 94 FOR SHOCK ABSORBER AT SPRING SUPPORT, TOP 		002 -
079 SPACER SLEEVE
FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 A 18 699 145 40  -
080 WASHER
FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 A 18 699 017 40  -
081 WASHER WITH CHAMFER
15 DIN 125 FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 -
082 CASTLE NUT
M 14X1,5 DIN 935-5 S FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 -
083 COTTER PIN
3X28 DIN 94 FOR SHOCK ABSORBER MOUNTING, BOTTOM 		002 -
085 STRAP
FOR REAR AXLE 		002 A 18 832 001 25  -
086 RUBBER BUFFER 002 A 15 332 501 44  -
087 HEX. -HD. SCREW
M 12X100 DIN 931-8 G FOR STRAP AT REAR SPRING SUPPORT 		002 -
088 LOCK WASHER
B 12 DIN 127 FOR STRAP AT REAR SPRING SUPPORT 		002 -
089 HEX. NUT
M 12 DIN 934-5 S FOR STRAP AT REAR SPRING SUPPORT 		002 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA