OIL PUMP AND LUBRICATING LINE

EPC / Mercedes / 1 / FG / FG 188.015 / 18 / 008
‹ ›

№- Name A* Part number A

DRIVE CASE WITH PRESSURE OIL PUMP AND OIL FILTER 		- XXX XXX XXX XXXX -
DRIVE CASE
WITH PRESSURE OIL PUMP AND OIL FILTER FOR TOOTHED GEARS WITH A HEIGHT OF 22 MM UP TO ENGINE NO. 55 00040
Replaced by: A  199 180 05 17 		- A 19 918 000 17  -
001 DRIVE CASE
WITH PRESSURE OIL PUMP AND OIL FILTER FOR TOOTHED GEARS WITH A HEIGHT OF 24 MM FROM ENGINE NO. 55 00041 		001 A 19 918 005 17  -
002 DRIVE CASE 001 A 19 918 002 17  -
003 STUD BOLT
M 8X38 DIN 835-5 S FOR INJECTION PUMP 		003 -
004 STUD BOLT
M 6X40 DIN 835-5 S FOR PRESSURE OIL PUMP 		004 -
005 STUD BOLT
M 6X20 DIN 835-5 S FOR PRESSURE OIL PUMP 		002 -
006 BUSHING, DRIVE CASE 001 A 19 907 700 46  -
007 THREADED BUSH, DRIVE CASE 001 A 19 999 700 16  -
008 SEAL
D 22X27 DIN 7603 A1 FOR OIL OUTLET TO OIL COOLER 		001 -
009 SCREWED NIPPLE
16 DIN 7627 FOR OIL OUTLET TO OIL COOLER 		001 -
010 SEAL
D 8X12 DIN 7603 A1 FOR OIL CONNECTION TO INJECTION PUMP 		001 -
011 SCREWED NIPPLE
3 DIN 7627 FOR OIL CONNECTION TO INJECTION PUMP 		001 -
012 VALVE CONE
FOR OIL PRESSURE RELIEF VALVE 		002 A 18 118 400 30  -
013 SPRING
FOR OIL PRESSURE RELIEF VALVE 		002 A 18 199 306 01  -
014 SEAL
D 18X22 DIN 7603 A1 FOR OIL PRESSURE RELIEF VALVE 		002 -
015 LOCKING SCREW
FOR OIL PRESSURE VALVE 		002 A 18 118 400 56  -

HOUSING, PRESSURE OIL PUMP UP TO ENGINE NO. 55 00040 		001 A 19 918 000 02  -
016
HOUSING, PRESSURE OIL PUMP FROM ENGINE NO. 55 00041 		001 A 19 918 001 02  -
017 BUSHING 002 A 19 918 100 50  -

PRESSURE OIL PUMP UP TO ENGINE NO. 55 00040 		001 A 19 918 000 07  -
018
PRESSURE OIL PUMP FROM ENGINE NO. 55 00041 		001 A 19 918 001 07  -
OIL PUMP
SHAFT WITH GEAR 22-MM HIGH UP TO ENGINE NO. 55 00040 		001 A 18 018 001 08  -
019 OIL PUMP
SHAFT WITH GEAR 24-MM HIGH FROM ENGINE NO. 55 00041 		001 A 18 618 003 08  -
020 SEAL
D 18X22 DIN 7603 A1 FOR LOCKING OF OIL BORE 		001 -
021 LOCKING SCREW
AM 18X1,5 DIN 7604-10 S 20 K FOR LOCKING OF OIL BORE 		001 -
022 SEAL
D 26X32 DIN 7603 A1 FOR CONNECTION OF OIL LINE 		001 -
SCREWED NIPPLE
20 DIN 7627 FOR CONNECTION OF OIL LINE UP TO ENGINE NO. 55 00040 		001 -
023 DOUBLE NIPPLE
16 DIN 7611 FOR CONNECTION OF OIL LINE FROM ENGINE NO. 55 00041 		001 -
SEAL
FOR OIL PUMP HOUSING AT DRIVE CASE UP TO ENGINE NO. 55 00040 		001 A 18 199 701 41  -
024 SEAL
FOR OIL PUMP HOUSING AT DRIVE CASE FROM ENGINE NO. 55 00041 		001 A 00 099 722 41  -
SEAL
FOR OIL PUMP HOUSING AT DRIVE CASE UP TO ENGINE NO. 55 00040 		001 A 19 999 700 41  -
025 SEAL
FOR OIL PUMP HOUSING AT DRIVE CASE FROM ENGINE NO. 55 00041 		001 A 00 099 723 41  -
026 WASHER
6,4 DIN 125 FOR OIL PUMP HOUSING AT DRIVE CASE 		006 -
027 HEX. NUT
M 6 DIN 934-5 S FOR OIL PUMP HOUSING AT DRIVE CASE UP TO ENGINE NO. 55 00040 		006 -
027 HEX. NUT
M 6 DIN 934-5 S FOR OIL PUMP HOUSING AT DRIVE CASE FROM ENGINE NO. 55 00041 		002 -
028 GROOVED NUT
M 6 DIN 1587-5 S FOR OIL PUMP HOUSING AT DRIVE CASE FROM ENGINE NO. 55 00041 		004 -
029 SPROCKET WHEEL
FOR OIL PUMP HOUSING AT DRIVE CASE 		001 A 19 918 100 12  -
030 SINGLE ROLLER CHAIN
FOR OIL PUMP HOUSING AT DRIVE CASE 		001 A 19 907 700 19  -
031 WOODRUFF KEY
3X5 DIN 6888 FOR SPROCKET WHEEL AT DRIVE SHAFT 		001 -
032 LOCK WASHER
B 10 DIN 127 FOR SPROCKET WHEEL AT DRIVE SHAFT 		001 -
033 HEX. NUT
M 10 DIN 936-5 S FOR SPROCKET WHEEL AT DRIVE SHAFT 		001 -
040 HOUSING, COMPLETE,
LUBE OIL LAMINATED FILTER WITH MICRONIC ELEMENT 		001 A 00 018 435 01  -
041 HOUSING 001 A 00 018 414 02  -
042 COIL 001 A 00 018 405 12  -
043 RING WITH SEAL 001 A 00 018 400 15  -
044 GASKET 001 A 00 018 406 80  -
045 FILTER ELEMENT
MICRONIC ELEMENT 		001 A 00 018 422 25  -
45a GASKET 001 A 00 018 417 80  -
046 HEX. NUT 001 A 00 099 049 51  -
047 SEAL
FOR OIL FILTER HOUSING, UPPER AND LOWER PART 		001 A 18 199 703 41  -
048 SEAL
D 10X16 DIN 7603 A1 LUBE OIL LAMINATED FILTER AT OIL FILTER HOUSING 		001 -
049 HEX.-HD. SCREW
M 10X1X170 DIN 960-8 G LUBE OIL LAMINATED FILTER AT OIL FILTER HOUSING 		001 -
050 SHIN
FOR DRIVE CASE AT CRANKCASE 		001 A 19 918 100 80  -
051 WASHER
8,4 DIN 433 FOR DRIVE CASE AT CRANKCASE 		004 -
052 HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE CASE AT CRANKCASE 		004 -
053 THREADED PIN
M 8X10 DIN 551-5 S FOR LOCKING OF CONTROL BORE 		001 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA