OIL PUMP AND LUBRICATING LINE

EPC / Mercedes / 1 / FG / FG 188.013 / 18 / 009
‹ ›

№- Name A* Part number A

OIL PUMP 		- XXX XXX XXX XXXX -
060 OIL PUMP, COMPLETE
SUCTION PUMP 		001 A 19 918 000 01  -
061 BUSHING 001 A 13 618 101 50  -
062 DRIVE GEAR, OIL PUMP 001 A 19 818 000 07  -
063 OIL PUMP
SHAFT WITH OIL PUMP GEAR 		001 A 19 818 001 08  -
064 OIL PUMP 001 A 19 918 000 03  -
065 BUSHING 002 A 19 418 101 50  -
066 WASHER 002 B 18 N 59 8N59a -
067 STUD BOLT
M 6X15 DIN 835 - 5 S 		002 -
068 HEX.-HD.SCREW
M 6X55 DIN 931-8 G OIL PUMP HOUSING, LOWER PART AT UPPER PART 		004 -
069 WASHER
6,4 DIN 125 OIL PUMP HOUSING, LOWER PART AT UPPER PART 		008 -
070 HEX. NUT
M 6 DIN 934 - 5 S OIL PUMP HOUSING, LOWER PART AT UPPER PART 		004 -
071 FOLLOWER, OIL PUMP 001 A 19 818 100 27  -
072 TIGHTENING PIN
4X18 DIN 1481 FOR FOLLOWER AT OIL PUMP 		001 -
073 SNAP RING
16 DIN 9045 FOR FOLLOWER AT OIL PUMP 		001 -
074 SUCTION PIPE
WITH SUCTION BASKET, COMPLETE 		001 A 19 918 000 52  -
075 CLAMP 001 A 18 699 506 44  -
076 SEALING FLANGE
SUCTION PIPE AT VACUUM PUMP 		001 A 18 699 701 80  -
077 LOCK WASHER
B 6 DIN 127 SUCTION PIPE AT VACUUM PUMP 		002 -
078 HEX. NUT
M 6 DIN 934-5 S SUCTION PIPE AT VACUUM PUMP 		002 -
079 COUPLING SLEEVE,
OIL PUMP DRIVE OIL PUMP AT CYLINDER CRANKCASE 		001 A 18 618 104 33  -
080 SPRING WASHER
B 8 DIN 137 OIL PUMP AT CYLINDER CRANKCASE 		002 -
081 HEX.-HD. SCREW
M 8X18 DIN 933-8 G OIL PUMP AT CYLINDER CRANKCASE 		002 -
082 HEX.-HD. SCREW
M 6X15 DIN 933-8 G SUCTION PIPE, CLAMP AT BRACKET 		001 -
083 LOCK WASHER
B 6 DIN 127 SUCTION PIPE, CLAMP AT BRACKET 		001 -
084 HEX. NUT
M 6 DIN 934-5 S SUCTION PIPE, CLAMP AT BRACKET 		001 -
085 OIL PRESSURE RELIEF VALVE 001 A 18 618 002 33  -
086 SPRING FOR
OIL PRESSURE RELIEF VALVE 		001 A 18 699 317 01  -
087 PISTON
FOR OIL PRESSURE RELIEF VALVE 		001 A 15 918 100 42  -
088 CIRCLIP
12X1 DIN 472 		001 -
089 SEAL
D 20X24 DIN 7603 OIL PRESSURE RELIEF VALVE AT CRANKCASE, PLUG SIDE 		001 -
090 OIL PRESSURE RELIEF VALVE 001 A 18 618 003 33  -
091 SPRING 001 A 18 699 318 01  -
092 PISTON 001 A 15 918 100 42  -
093 CIRCLIP
12X1 DIN 472 		001 -
094 SEAL
D 20X24 DIN 7603 FOR OIL PRESSURE RELIEF VALVE AT CRANKCASE, REAR 		001 -
095 OIL LINE
FROM OIL FILTER TO OIL COOLER 		001 A 19 918 002 30  -
096 OIL LINE
FROM OIL COOLER TO CRANKCASE 		001 A 19 918 004 30  -
097 OIL LINE
FROM OIL FILTER TO INJECTION PUMP 		001 A 19 918 003 30  -
098 BRACKET
FOR BRACKET, OIL LINE, OIL FILTER, INJECTION PUMP FROM ENGINE NO. 65 00041 		001 A 19 918 000 40  -
099 CONNECTION FLANGE
FOR OIL OUTLET TO OIL CONTAINER FOR CONNECTION FLANGE AT CRANKCASE 		001 A 19 918 701 38  -
100 GASKET
FOR CONNECTION FLANGE AT CRANKCASE 		001 A 19 918 700 80  -
101 WASHER
8,4 DIN 125 FOR CONNECTION FLANGE AT CRANKCASE 		002 -
102 HEX.-HD. SCREW
M 8X25 DIN 931-8 G FOR CONNECTION FLANGE AT CRANKCASE 		001 -
103 HEX.-HD. SCREW
M 8X40 DIN 931-8 G FOR CONNECTION FLANGE AT CRANKCASE 		001 -
104 SEAL
D 22X27 DIN 7603 A1 FOR CONNECTION FLANGE AT CRANKCASE 		001 -
105 SCREWED NIPPLE
16 DIN 7627 FOR CONNECTION FLANGE AT CRANKCASE 		001 -
106 MOUNTING CLAMP
FOR OIL LINE AT BRACKET FROM ENGINE NO. 65 00041 		001 A 63 699 500 20  -
107 LOCK WASHER
B 5 DIN 127 FOR OIL LINE AT BRACKET FROM ENGINE NO. 65 00041 		001 -
108 HEX.-HD. SCREW
M 5X10 DIN 933-8 G FOR OIL LINE AT BRACKET FROM ENGINE NO. 65 00041 		001 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA