CHASSIS SHEET METAL PARTS

EPC / Mercedes / 1 / FG / FG 180.037 / 88 / 058
‹ ›

№- Name A* Part number A

CHASSIS SHEET METAL PARTS 		- XXX XXX XXX XXXX -
ENGINE HOOD 001 A 30 180 880 00 57 -
002 HOOD HINGE, LEFT
WITH 3 NOTCHES FOR SPRING 		001 A 10 180 880 03 29 -
003 HOOD HINGE, RIGHT
WITH 3 NOTCHES FOR SPRING 		001 A 10 180 880 04 29 -
TENSION SPRING
Replaced by: A 10 180 887 02 79 		- A 10 180 887 01 79 -
004 TENSION SPRING 002 A 10 180 887 02 79 -
005 HEX. -HD.
SCREW WITH SHAFT FOR ENGINE HOOD TO HOOD HINGE 		004 A 00 098 403 33  -
006 SPRING WASHER
FOR ENGINE HOOD TO HOOD HINGE 		004 A 00 099 004 48  -
007 SPRING WASHER
FOR ENGINE HOOD TO HOOD HINGE 		004 A 00 099 004 48  -
HEX. -HD. SCREW
M 8X25 DIN 933-8 G FOR HOOD HINGE TO WHEEL ARCH 		002 -
008 WASHER
FOR HOOD HINGE TO WHEEL ARCH 		004 A 10 120 887 04 58 -
009 RUBBER MOUNTING
FOR HOOD HINGE TO WHEEL ARCH 		002 A 10 120 887 00 78 -
010 RUBBER RING
FOR HOOD HINGE TO WHEEL ARCH 		002 A 10 120 887 00 94 -
011 BUSHING
FOR HOOD HINGE TO WHEEL ARCH 		002 A 10 120 887 00 49 -
STUD BOLT
FOR HOOD HINGE TO BASE PLATE 		004 A 12 099 004 05  -
012 WASHER
FOR HOOD HINGE TO BASE PLATE 		004 A 10 120 887 05 58 -
RUBBER MOUNTING
FOR HOOD HINGE TO BASE PLATE
Replaced by: A 10 120 887 02 78 		- A 10 120 887 01 78 -
013 RUBBER MOUNTING
FOR HOOD HINGE TO BASE PLATE 		002 A 10 120 887 02 78 -
014 RUBBER INTERMEDIATE LAYER
FOR HOOD HINGE TO BASE PLATE 		002 A 10 120 887 01 94 -
015 BUSHING
BETWEEN RUBBER MOUNTING AND SCREW FOR HOOD HINGE TO BASE PLATE 		004 A 10 120 887 01 49 -
016 SHIM 1.5 MM THICK
FOR HOOD HINGE TO BASE PLATE OPTIONAL 		NB A 10 120 887 00 56 -
SHIM 3.0 MM THICK
FOR HOOD HINGE TO BASE PLATE OPTIONAL 		NB A 10 120 887 01 56 -
HEX. NUT
M 6 DIN 934-5 S FOR HOOD HINGE TO BASE PLATE 		004 -
16a RUBBER BUFFER
FOR ENGINE HOOD SUPPORT LATERAL, LEFT AND RIGHT, TO MOUNTING ANGLE 		002 A 00 098 710 40  -
CAGE CLIP WITH NUT
FOR RUBBER BUFFER TO MOUNTING ANGLE 		002 A 00 099 022 91  -
LENS-HD. SHEET
METAL SCREW BZ 3,9X9,5 DIN 7981 FOR RUBBER BUFFER TO MOUNTING ANGLE 		002 -
WASHER
4,3 DIN 433 FOR RUBBER BUFFER TO MOUNTING ANGLE 		002 -
017 LOCKING PLATE
FOR ENGINE HOOD LOCK, UPPER PART 		001 A 10 180 880 02 11 -
HEX. -HD. SCREW
M 6X15 DIN 933-8 G FOR LOCKING PLATE TO FRONT HOOD BRACKET, FRONT 		002 -
WASHER
6,4 DIN 125 FOR LOCKING PLATE TO FRONT HOOD BRACKET, FRONT 		002 -
LOCK WASHER
B 6 DIN 127 FOR LOCKING PLATE TO FRONT HOOD BRACKET, FRONT 		002 -
COUNTERSUNK SCREW
AM 6X12 DIN 7987-4 S FOR LOCKING PLATE TO FRONT HOOD BRACKET, REAR 		002 -
018
LOCK, UPPER PART 		001 A 10 180 880 01 60 -
WASHER
FOR ENGINE HOOD LOCK, UPPER PART TO LOCK PLATE 		002 A 00 098 417 55  -
COUNTERSUNK SCREW
AM 6X25 DIN 7987-4 S FOR ENGINE HOOD LOCK, UPPER PART TO LOCK PLATE 		002 -
019 WASHER
FOR ENGINE HOOD LOCK, UPPER PART TO LOCK PLATE 		004 A 10 120 887 04 58 -
HEX. NUT
M 6 DIN 934-5 S FOR ENGINE HOOD LOCK, UPPER PART TO LOCK PLATE 		002 -
LOCK WASHER
B 6 DIN 127 FOR ENGINE HOOD LOCK, UPPER PART TO LOCK PLATE 		002 -
020 RUBBER MOUNTING
FOR ENGINE HOOD LOCK, UPPER PART TO LOCK PLATE 		002 A 10 120 887 00 78 -
021 RUBBER RING
FOR ENGINE HOOD LOCK, UPPER PART TO LOCK PLATE 		002 A 10 120 887 00 94 -
022 BUSHING
FOR ENGINE HOOD LOCK, UPPER PART TO LOCK PLATE 		002 A 10 120 887 00 49 -
023
LOCK, LOWER PART 		001 A 10 120 880 02 60 -
COUNTERSUNK SCREW
AM 4X12 DIN 7987-4 S FOR ENGINE HOOD LOCK, LOWER PART TO REINFORCEMENT FRAME 		004 -
LOCK WASHER
B 4 DIN 127 FOR ENGINE HOOD LOCK, LOWER PART TO REINFORCEMENT FRAME 		004 -
HEX. NUT
M 4 DIN 934-5 S FOR ENGINE HOOD LOCK, LOWER PART TO REINFORCEMENT FRAME 		004 -
024 ENGINE HOOD 001 A 10 180 880 02 59 -
025 KNURLED NUT 001 A 18 752 700 72  -
HEX. NUT
BM 5 DIN 439- 5 S FOR ENGINE HOOD CABLE TO FRONT WALL 		001 -
026 HANDLE
FOR ENGINE HOOD CABLE 		001 A 12 030 208 01  -
027 PIN
FOR ENGINE HOOD CABLE TO LOCK, LOWER PART 		001 A 00 099 103 07  -
028 FIXING CLAMP
FOR ENGINE HOOD CABLE TO FRONT COVERING PLATE UP TO CHASSIS 7510907 		001 A 13 699 505 01  -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR ENGINE HOOD CABLE TO FRONT COVERING PLATE UP TO CHASSIS 7510907 		001 -
LOCK WASHER
B 4 DIN 127 FOR ENGINE HOOD CABLE TO FRONT COVERING PLATE UP TO CHASSIS 7510907 		001 -
HEX. NUT
M 4 DIN 934-5 S FOR ENGINE HOOD CABLE TO FRONT COVERING PLATE UP TO CHASSIS 7510907 		001 -
029 FIXING CLAMP
FOR ENGINE HOOD CABLE TO WHEEL ARCH UP TO CHASSIS 7510907 		001 A 18 699 502 20  -
LENS-HD. SHEET
METAL SCREW B 4,8X13 DIN 7981 FOR ENGINE HOOD CABLE TO WHEEL ARCH UP TO CHASSIS 7510907 		001 -
29a GROMMET
FOR ENGINE HOOD CABLE THROUGH FRONT WALL AND CROSS DUCT 		001 A 18 699 706 81  -
FIXING CLAMP
FOR ENGINE HOOD CABLE TO BRACKET FOR IGNITION COIL UP TO CHASSIS 7510907 		001 A 18 699 502 20  -
LOCK WASHER
B 4 DIN 127 FOR ENGINE HOOD CABLE TO BRACKET FOR IGNITION COIL UP TO CHASSIS 7510907 		001 -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR ENGINE HOOD CABLE TO BRACKET FOR IGNITION COIL UP TO CHASSIS 7510907 		001 -
CLIP WITH LUG
FOR ENGINE HOOD CABLE TO STRUT, WHEEL ARCH AND BRACKET FOR IGNITION COIL FROM CHASSIS 7510908 		002 A 00 098 833 78  -
030 LOCKING HOOK 001 A 10 180 880 06 64 -
LENS-HD. SCREW
AM 5X12 DIN 7985-4 S FOR LOCKING HOOK TO REINFORCEMENT FRAME 		002 -
LOCK WASHER
B 5 DIN 127 FOR LOCKING HOOK TO REINFORCEMENT FRAME 		002 -
032 RUBBER BUFFER
FOR ENGINE HOOD SUPPORT 		004 A 00 098 757 40  -
LENS-HD. SHEET
METAL SCREW BZ 3,9X16 DIN 7981 FOR RUBBER BUFFER TO WHEEL ARCH 		004 -
WASHER
4,3 DIN 433 FOR RUBBER BUFFER TO WHEEL ARCH 		004 -
033 RUBBER BUFFER
TO BRACKET, CENTER ENGINE HOOD REINFORCEMENT FRAME, TOP 		002 A 00 098 718 40  -
034 RUBBER BUFFER
FOR ENGINE HOOD SUPPORT, REINFORCEMENT FRAME, BOTTOM 		002 A 00 098 762 40  -
LENS-HD. SCREW
AM 5X25 DIN 7985-4 S FOR RUBBER BUFFER TO REINFORCEMENT FRAME 		002 -
WASHER
5,3 DIN 125 FOR RUBBER BUFFER TO REINFORCEMENT FRAME 		002 -
HEX. NUT
M 5 DIN 934-5 S FOR RUBBER BUFFER TO REINFORCEMENT FRAME 		002 -
035 RUBBER SEALING,
195-MM LON G BETWEEN ENGINE HOOD AND REINFORCEMENT PLATE ORDER BY THE METER 		002 A 00 098 740 36  -
037 RUBBER BUFFER
AT ENGINE HOOD LEFT AND RIGHT, LATERAL 		002 A 13 652 700 85  -

RADIATOR COVERING 		- XXX XXX XXX XXXX -
040 RADIATOR COVERING
WITHOUT PROTECTION GRILL, WITH TRADE MARK, BUT WITHOUT STAR 		001 A 10 180 880 03 83 -
041 CLIP NUT 009 A 00 099 405 45  -
042 TRADE MARK 001 A 10 180 880 00 88 -
LOCK WASHER
B 4 DIN 127 FOR TRADE MARK TO RADIATOR COVERING 		001 -
HEX. NUT
M 4 DIN 934-5 S FOR TRADE MARK TO RADIATOR COVERING 		001 -
WASHER
4,3 DIN 125 FOR TRADE MARK TO RADIATOR COVERING 		001 -
043 RUBBER INTERMEDIATE LAYER
FOR RADIATOR COVERING TO SUPPORTING FRAME, ENGINE HOOD 		001 A 10 180 888 01 98 -
LENS-HD. SHEET
METAL SCREW B 4,8X16 DIN 7981 FOR RADIATOR COVERING TO SUPPORTING FRAME, ENGINE HOOD 		009 -
044 WASHER
FOR RADIATOR COVERING TO SUPPORTING FRAME, ENGINE HOOD 		009 A 00 099 003 48  -
REPLACED BY
10 180 880 03 86 TOGETHER WITH 1 LOCKING PLATE 000 994 01 21 UP TO CHASSIS 7507235 		- A 10 180 888 00 09 -
REPLACED BY
10 180 880 03 86 TOGETHER WITH 1 LOCKING PLATE 000 994 01 21 UP TO CHASSIS 7507235 		- A 10 180 888 00 12 -
REPLACED BY
10 180 880 03 86 TOGETHER WITH 1 LOCKING PLATE 000 994 01 21 UP TO CHASSIS 7507235 		- A 10 180 888 00 13 -
REPLACED BY
10 180 880 03 86 TOGETHER WITH 1 LOCKING PLATE 000 994 01 21 UP TO CHASSIS 7507235 		- A 10 180 888 01 17 -
REPLACED BY
10 180 880 03 86 TOGETHER WITH 1 LOCKING PLATE 000 994 01 21 UP TO CHASSIS 7507235 		- A 10 180 888 00 97 -
SPRING WASHER
B 10 DIN 137 FOR ESCUTCHEON AND MERCEDES STAR TO RADIATOR COVERING UP TO CHASSIS 7507235 		001 -
HEX. NUT
M 10X1,5 DIN 936-5 S FOR ESCUTCHEON AND MERCEDES STAR TO RADIATOR COVERING UP TO CHASSIS 7507235 		001 -
050 MERCEDES STAR, REVERSIBLE
FROM CHASSIS 7507236 		001 A 10 180 880 03 86 -
051 MERCEDES STAR
FROM CHASSIS 7507236 		001 A 10 180 888 01 09 -
052 ESCUTCHEON
FROM CHASSIS 7507236 		001 A 10 180 888 02 17 -
053 TENSION SPRING
FROM CHASSIS 7507236 		001 A 10 180 888 00 34 -
054 LOCKING PLATE
FOR STAR TO RADIATOR COVERING FROM CHASSIS 7507236 		001 A 00 099 401 21  -
055 RUBBER PAD
FOR STAR TO RADIATOR COVERING FROM CHASSIS 7507236 		001 A 10 180 888 01 97 -
060 RADIATOR PROTECTION GRILL 001 A 10 180 880 00 85 -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR RADIATOR PROTECTION GRILL TO RADIATOR COVERING FRAME 		002 -
WASHER
4,3 DIN 125 FOR RADIATOR PROTECTION GRILL TO RADIATOR COVERING FRAME 		004 -
LOCK WASHER
B 4 DIN 127 FOR RADIATOR PROTECTION GRILL TO RADIATOR COVERING FRAME 		002 -
HEX. NUT
M 4 DIN 934-5 S FOR RADIATOR PROTECTION GRILL TO RADIATOR COVERING FRAME 		002 -
061 HOLDING SPRING, BOTTOM
FOR RADIATOR PROTECTION GRILL TO RADIATOR COVERING FRAME 		002 A 10 120 888 00 34 -
062 HOLDING SPRING,
TOP AND CENTER FOR RADIATOR PROTECTION GRILL TO RADIATOR COVERING FRAME 		006 A 10 120 888 02 34 -
063 ORNAMENTAL BAR LENGTHWISE
TO RADIATOR PROTECTION GRILL 		001 A 10 180 888 02 21 -
064 SQUARE NUT
FOR ORNAMENTAL BAR TO RADIATOR PROTECTION GRILL 		003 A 00 099 005 33  -
WASHER
3,2 DIN 125 FOR ORNAMENTAL BAR TO RADIATOR PROTECTION GRILL 		003 -
LOCK WASHER
B 3 DIN 127 FOR ORNAMENTAL BAR TO RADIATOR PROTECTION GRILL 		003 -
HEX. NUT
M 3 DIN 934-5 S FOR ORNAMENTAL BAR TO RADIATOR PROTECTION GRILL 		003 -
065 ORNAMENTAL BAR,
ACROSS OF RADIATOR GRILL 1ST, 2ND, 3RD AND 4TH SEEN FROM TOP 		008 A 10 180 888 10 22 -
066 ORNAMANTAL BAR,
ACROSS OF RADIATOR GRILL 5TH SEEN FRAOM TOP 		002 A 10 180 888 11 22 -
067 CLIP
FOR ORNAMENTAL BAR TO RADIATOR PROTECTION GRILL 		020 A 00 098 850 78  -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA