HEATING AND VENTILATION

EPC / Mercedes / 1 / FG / FG 180.030 / 83 / 055
‹ ›

№- Name A* Part number A

HEATING AND VENTILATION 		- XXX XXX XXX XXXX -
001 CONNECTING FITTING, LEFT
FOR BLOWER BETWEEN HOSE AND AIR DUCT FOR MOUNTING OF BLOWER 		001 A 10 180 830 01 21 -
CONNECTING FITTING, RIGHT
BETWEEN HOSE AND AIR DUCT FOR MOUNTING OF BLOWER
Replaced by: A 10 180 830 01 21 		- A 10 180 830 00 21 -
002 CONNECTING FITTING, RIGHT
FOR BLOWER BETWEEN HOSE AND AIR DUCT FOR MOUNTING OF BLOWER 		001 A 10 180 830 01 21 -
LOCKING WASHER
FOR CABLE PASSAGE, BLOWER 		001 A 00 098 701 44  -
004 HOSE
BETWEEN SCCOP AND CONNECTING FITTING 		002 A 10 180 831 01 88 -
HOSE STRAP
9X0,4 N 263 FOR HOSE TO AIR DUCT AND SCOOP ORDER BY THE METER 		NB -
HOSE CLAMP
WSN 9 N 262 FOR HOSE TO AIR DUCT AND SCOOP 		004 -
BLOWER, 12
VOLT, SINGLE-STAGE 2ND BLOWER ON SPECIAL REQUEST UP TO CHASSIS 7509038 		001 A 11 120 830 02 08 -
005 BLOWER, 12
VOLT, TWO-STAGE 2ND BLOWER ON SPECIAL REQUEST FROM CHASSIS 7509039 		001 A 10 180 830 00 08 -
006 CARBON BRUSH 002 A 00 083 501 75  -
007 FAN BLADE 001 A 10 120 835 01 85 -
RUBBER MOUNTING
FOR BLOWER MOUNTING UP TO CHASSIS 7509038 		003 A 10 120 835 01 28 -
008 RUBBER MOUNTING
FOR BLOWER MOUNTING FROM CHASSIS 9509039 		003 A 10 180 835 00 28 -
LENS-HD. SCREW
AM 5X15 DIN 7985-4 S FOR BLOWER TO CONNECTING FITTING 		003 -
LOCK WASHER
B 5 DIN 127 FOR BLOWER TO CONNECTING FITTING 		003 -
009 GROMMET
IN CONNECTING FITTING 		001 A 00 099 719 81  -
010 AIR DUCT, LEFT 001 A 10 180 830 07 62 -
011 AIR DUCT, RIGHT 001 A 10 180 830 08 62 -
012 BRACKET
FOR BOWDEN CABLE, LEFT 		001 A 10 180 831 03 14 -
013 BRACKET
FOR BOWDEN CABLE, RIGHT 		001 A 10 180 831 04 14 -
BRACKET
FOR FUSE BOX TO AIR DUCT, LEFT 		- A 10 120 830 00 20 -
014 LEVER
FOR LOWER FLAP 		002 A 10 180 830 00 56 -
015 LEVER
FOR UPPER FLAP 		002 A 10 180 830 01 56 -
016 AXLE WITH FLAP 002 A 10 180 830 00 42 -
018 FLAP, TOP
FOR AIR DUCT 		002 A 10 180 831 00 43 -
019 RING
BETWEEN LEVER AND DUCT ON AXLE 		002 A 10 180 831 00 82 -
WASHER
5,3 DIN 125 FOR AXLE TO AIR DUCT 		002 -
HEX. NUT
AM 5 DIN 439-5 S FOR AXLE TO AIR DUCT 		004 -
THREADED PIN
M 4X6 DIN 553-5 S FOR LEVER TO SHAFT 		002 -
020 SEALING RUBBER
FOR AIR DUCT TO FRONT WALL 		002 A 10 180 831 01 99 -
LENS-HD. SCREW
AM 6X15 DIN 7985-4 S FOR AIR DUCT TO FRONT WALL 		006 -
HEX. -HD. SCREW
M 6X65 DIN 931-8 G FOR AIR DUCT TO FRONT WALL 		002 -
WASHER
6,4 DIN 125 FOR AIR DUCT TO FRONT WALL 		008 -
021 GROMMET FOR
BOWDEN CABLE, AIR FLAP FOR PASSAGE AT FRONT WALL UP TO CHASSIS 7509599 		002 A 18 099 708 81  -
GROMMET
FOR BOWDEN CABLE, CONTROL COCK UP TO CHASSIS 7509599 		002 A 00 099 718 81  -
022 GROMMET
FOR BOWDEN CABLE, CONTROL COCK FROM CHASSIS 7509600 		002 A 18 099 711 81  -
025 TIGHTENING STRAP
FOR AIR DUCT 		002 A 10 120 830 01 29 -
LENS-HD. SCREW
AM 6X22 DIN 7985-4 S FOR AIR DUCT TO CONNECTING FITTING, FRONT 		002 -
LOCK WASHER
B 6 DIN 127 FOR AIR DUCT TO CONNECTING FITTING, FRONT 		002 -
HEX. NUT
M 6 DIN 934-5 S FOR AIR DUCT TO CONNECTING FITTING, FRONT 		002 -
INSECT SCREEN
UP TO CHASSIS 6512596 		002 A 10 180 830 00 18 -
026 INSECT SCREEN
FROM CHASSIS 6512597 		002 A 10 180 830 04 18 -
WING SCREW
M 6X12 DIN 316-4 D FOR INSECT SCREEN TO SCOOP, FRONT 		002 -
CAGE CLIP WITH NUT
FOR INSECT SCREEN TO SCOOP, FRONT 		002 A 00 099 022 91  -
LOCK WASHER
B 6 DIN 127 FOR INSECT SCREEN TO SCOOP, FRONT 		002 -
027 HEAT EXCHANGER, LEFT 001 A 10 120 835 05 01 -
028 HEAT EXCHANGER, RIGHT 001 A 10 120 835 06 01 -
28a CONTROL VALVE, LEFT 001 A 12 083 501 20  -
28b CONTROL VALVE, RIGHT 001 A 12 083 502 20  -
029 GASKET
O-RING IN CONTROL VALVE, LEFT AND RIGHT 		002 A 00 083 500 98  -

Replaced by: A  000 983 02 98 		- A 00 098 321 92  -
INTERMEDIATE LAYER
MOLTOPREN 12X60X125-MM FOR HEAT EXCHANGER
Replaced by: A  000 983 02 98 		- A 10 120 831 01 93 -
INTERMEDIATE LAYER
MOLTOPREN 12X60X125-MM FOR HEAT EXCHANGER ORDER BY THE METER 		002 A 00 098 302 98  -
ANGLE
SEE GROUP 68, TABLE 43 		002 A 10 180 687 00 12 -
BRACKET
FOR BOWDEN CABLE
Replaced by: A  120 830 00 50 		- A 10 120 830 00 50 -
031 BRACKET
FOR BOWDEN CABLE 		002 A 12 083 000 50  -
032 SEALING RUBBER
FOR HEAT EXCHANGER AND BRACKET TO AIR DUCT 		002 A 10 120 835 00 92 -
LENS-HD. SHEET
METAL SCREW B 4,8X19 DIN 7981 FOR HEAT EXCHANGER AND BRACKET TO AIR DUCT 		004 -
LENS-HD. SHEET
METAL SCREW B 4,8X22 DIN 7981 FOR HEAT EXCHANGER AND BRACKET TO AIR DUCT 		004 -
WASHER
A 5,3 DIN 9021 FOR HEAT EXCHANGER AND BRACKET TO AIR DUCT 		002 -

Replaced by: A 40 121 833 03 31 		- A 10 180 833 01 31 -
WIRE CABLE,
LEFT, TOP AND RIGHT, BOTTOM
Replaced by: A 40 121 833 03 31 		- A 30 180 833 01 31 -
033 WIRE CABLE,
LEFT, TOP AND RIGHT, BOTTOM SHORTEN AS REQUESTED 		002 A 40 121 833 03 31 -

Replaced by: A 40 121 833 04 31 		- A 10 180 833 02 31 -
WIRE CABLE,
LEFT, BOTTOM AND RIGHT, TOP
Replaced by: A 40 121 833 04 31 		- A 30 180 833 02 31 -
034 WIRE CABLE,
LEFT, BOTTOM AND RIGHT, TOP SHORTEN AS REQUESTED 		002 A 40 121 833 04 31 -
035 WIRE SPIRAL
360-MM LONG 470-MM LONG ORDER BY THE METER 		004 A 00 098 801 72  -
036 INSULATING HOSE
320-MM LONG 450-MM LONG B 5X6,2 SW DIN 40621 ORDER BY THE METER 		004 -
037 FIXING CLAMP
FOR WIRE CABLE TO AIR DUCT 		004 A 13 699 506 01  -
LENS-HD. SCREW
AM 4X8 DIN 7985-4 S FOR WIRE CABLE TO AIR DUCT 		004 -
LOCK WASHER
B 4 DIN 127 FOR WIRE CABLE TO AIR DUCT 		004 -
LOCKING WASHER
4 DIN 6799 FOR WIRE CABLE TO FLAP 		004 -
040 REGULATING FLAP,
LEFT AND RIGHT IN CROSS DUCT, BODY FRONT END 		002 A 10 120 830 05 42 -
041 SPRING
FOR REGULATING FLAP 		002 A 10 120 831 00 34 -
LENS-HD. SHEET
METAL SCREW B 4,8X13 DIN 7981 FOR REGULATING FLAP TO CROSS DUCT 		004 -
042 CLIP NUT
FOR REGULATING FLAP TO CROSS DUCT 		004 A 00 099 406 45  -
FLAP - A 10 186 831 02 24 -
PRESSURE SPRING - A 10 186 831 00 34 -
PIN - A 10 180 831 00 15 -
HOSE
FROM DEFROSTER NOZZLE TO SIDE PANE VENTILATION UP TO CHASSIS 7514061 		002 A 30 180 831 01 88 -
HOSE
FROM DEFROSTER NOZZLE TO SIDE PANE VENTILATION FROM TO CHASSIS 7514062 		002 A 30 180 831 03 88 -
COUNTERSUNK SHEET
METAL SCREW B 2,9X9,5 DIN 7982 FOR HOSE TO WINDSCREEN PILLAR FROM CHASSIS 7514062 		006 -
COUNTERSUNK SHEET
METAL WASHER FOR HOSE TO WINDSCREEN PILLAR FROM CHASSIS 7514062 		006 A 00 098 502 62  -
HOSE
FROM AIR DUCT TO DEFROSTER NOZZLE 		002 A 30 180 831 02 88 -
HOSE
FROM AIR DUCT TO DEFROSTER NOZZLE
Replaced by: A 10 120 831 03 88 		- A 10 120 831 02 88 -
054 DEFROSTER NOZZLE, LEFT 001 A 30 180 830 01 19 -
055 DEFROSTER NOZZLE, RIGHT 001 A 30 180 830 02 19 -
TEROSTAT, 20X2 MM
ORDER BY THE METER 		NB A 00 098 945 85  -
LENS-HD. SCREW
AM 4X12 DIN 7985-4 S FOR DEFROSTER NOZZLE TO CROSS CLAMP 		008 -
LOCK WASHER
B 4 DIN 127 FOR DEFROSTER NOZZLE TO CROSS CLAMP 		008 -
WASHER
4,3 DIN 125 FOR DEFROSTER NOZZLE TO CROSS CLAMP 		008 -
FEED PIPE
Replaced by: A 10 180 830 02 15 		- A 10 120 830 01 15 -
060 FEED PIPE 001 A 10 180 830 02 15 -
FEED PIPE 001 A 10 180 830 01 15 -
061 RETURN PIPE 001 A 10 180 830 00 16 -
RETURN PIPE 001 A 10 180 830 01 16 -
062 FIXING CLAMP
FOR RETURN PIPE TO WHEEL ARCH 		001 A 18 699 500 37  -
LENS-HD. SCREW
AM 6X15 DIN 7985-4 S FOR RETURN PIPE TO WHEEL ARCH 		001 -
LOCK WASHER
B 6 DIN 127 FOR RETURN PIPE TO WHEEL ARCH 		001 -
HEX. NUT
M 6 DIN 934-5 S FOR RETURN PIPE TO WHEEL ARCH 		001 -
BRACKET
FOR HEATING TUBE
Replaced by: A 10 180 830 06 50 		- A 10 180 830 07 50 -
063 BRACKET
FOR HEATING TUBE 		001 A 10 180 830 06 50 -
BRACKET
FOR HEATING TUBE
Replaced by: A 10 180 830 10 50 		- A 10 180 830 09 50 -
FIXING CLAMP
FOR HEATING TUBE
Replaced by: A 10 120 830 00 68 		- A 10 180 830 08 50 -
064 FIXING CLAMP
FOR HEATING TUBE 		001 A 10 120 830 00 68 -
INSULATING HOSE,
15-MM LONG B 10X11,4 SW DIN 40621 ORDER BY THE METER 		001 -
INTERMEDIATE LAYER,
1X20X50-MM FELT, BLACK ORDER BY THE METER 		001 A 00 098 331 92  -
BRACKET
FOR HEATING TUBE 		001 A 30 180 830 00 50 -
GROMMET
FOR HEATING PASSAGE TO FRONT WALL 		002 A 30 180 831 00 99 -
COUNTERSUNK SCREW
AM 6X15 DIN 7987-4 S FOR BRACKET TO BODY FRONT END 		001 -
FIXING CLAMP 001 A 10 180 830 05 50 -
FIXING CLAMP
Replaced by: A 10 120 830 00 68 		- A 10 120 830 01 68 -
LENS-HD. SCREW
AM 6X12 DIN 7985-4 S FOR FIXING CLAMP TO BODY FRONT END 		001 -
WASHER
6,4 DIN 125 FOR FIXING CLAMP TO BODY FRONT END 		001 -
LOCK WASHER
B 6 DIN 127 FOR FIXING CLAMP TO BODY FRONT END 		001 -
CAGE CLIP WITH NUT
FOR FIXING CLAMP TO BODY FRONT END 		001 A 00 099 022 91  -
065 HOSE, 175 MM LONG
FOR FEED PIPE FROM PIPE LINE TO HEAT EXCHANGER, BOTTOM 		002 A 10 120 831 00 94 -
066 HOSE, 80 MM LONG
FOR RETURN PIPE FROM PIPE LINE TO HEAT EXCHANGER, TOP 		002 A 10 120 831 01 94 -
HOSE STRAP
FOR FEED PIPE 210-MM LONG FOR RETURN PIPE 310-MM LONG 5X0,35 N 263 FOR HOSE TO FEED PIPE AND RETURN PIPE ORDER BY THE ME 		NB -
HOSE CLAMP
WSN 5 N 262 FOR HOSE TO FEED PIPE AND RETURN PIPE 		008 -
HOSE, 220 MM LONG
FOR FEED PIPE FROM PIPE LINE TO ENGINE, TOP
Replaced by: A 10 180 831 01 97 		- A 10 180 881 00 97 -
067 HOSE, 220 MM LONG
FOR FEED PIPE FROM PIPE LINE TO ENGINE, TOP 		001 A 10 180 831 01 97 -
068 HOSE, 250 MM LONG
FOR RETURN PIPE VON PIPE LINE TO ENGINE, BOTTOM 		001 A 10 180 831 01 97 -
HOSE STRAP
5X0,35 N 263 FOR HOSE TO RETURN PIPE AND FEED PIPE ORDER BY THE METER 		NB -
HOSE CLAMP
WSN 5 N 262 FOR HOSE TO RETURN PIPE AND FEED PIPE 		006 -
070 OPERATION, LEFT
FOR VENTILATION REGULATING AND FOR HEATING REGULATING 		001 A 30 180 830 03 33 -
072 OPERATION, RIGHT
FOR VENTILATION REGULATING AND HEATING REGULATING 		001 A 30 180 830 04 33 -
073 CLIP WITH HOOK
FOR WIRE CABLES, VENTILATION AND CONTROL COCK TO BRACKET 		006 A 00 098 869 78  -
LENS-HD. SCREW
M 6X20 DIN 7985-4 S FOR OPERATION AT INSTRUMENT PANEL 		004 -
LOCK WASHER
B 6 DIN 127 FOR OPERATION AT INSTRUMENT PANEL 		004 -
WASHER
A 6,4 DIN 9021 FOR OPERATION AT INSTRUMENT PANEL 		004 -
MOUNTING, LEFT
FROM CHASSIS 9507821 		001 A 12 083 301 14  -
MOUNTING, RIGHT
FROM CHASSIS 9507821 		001 A 12 083 302 14  -
HEX. -HD. SCREW
M 4X12 DIN 933-8 G FOR MOUNTING TO COVER PLATE, GLOVE COMPARTMENT 		004 -
LOCK WASHER
B 4 DIN 127 FOR MOUNTING TO COVER PLATE, GLOVE COMPARTMENT 		004 -
074 HANDLE
FOR OPERATION OF HEATING AND VENTILATION 		006 A 10 180 830 00 36 -
075 RUBBER SLEEVE OVER HANDLE 006 A 10 180 833 00 91 -
076 FIXING SCREW
FOR WIRE CABLE FLAP AND CONTROL COCK TO OPERATION LEVER 		006 A 12 136 831 00 89 -
077 BUSHING
FOR WIRE CABLE FLAP AND CONTROL COCK TO OPERATION LEVER 		006 A 13 607 200 50  -
WASHER
4,3 DIN 433 FOR WIRE CABLE FLAP AND CONTROL COCK TO OPERATION LEVER 		006 -
LOCK WASHER
B 4 DIN 127 FOR WIRE CABLE FLAP AND CONTROL COCK TO OPERATION LEVER 		006 -
HEX. NUT
M 4 DIN 934-5 S FOR WIRE CABLE FLAP AND CONTROL COCK TO OPERATION LEVER 		006 -

Replaced by: A 40 121 833 03 31 		- A 10 180 833 03 31 -
WIRE CABLE, LEFT
FOR CONTROL COCK
Replaced by: A 40 121 833 03 31 		- A 30 180 833 03 31 -
080 WIRE CABLE, LEFT
FOR CONTROL COCK 		001 A 40 121 833 03 31 -

Replaced by: A 40 121 833 04 31 		- A 10 180 833 04 31 -
WIRE CABLE, RIGHT
FOR CONTROL COCK
Replaced by: A 40 121 833 04 31 		- A 30 180 833 04 31 -
081 WIRE CABLE, RIGHT
FOR CONTROL COCK 		001 A 40 121 833 04 31 -
082 WIRE SPIRAL
545-MM LONG 635-MM LONG ORDER BY THE METER 		002 A 00 098 801 72  -
083 INSULATING HOSE
510-MM LONG 620-MM LONG B 5X6,2 SW DIN 40621 ORDER BY THE METER 		002 -
LOCKING WASHER
4 DIN 6799 FOR WIRE CABLE TO CONTROL COCK 		002 -
084 FIXING CLAMP
FOR WIRE CABLE TO HEAT EXCHANGER 		002 A 13 699 506 01  -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR WIRE CABLE TO HEAT EXCHANGER 		002 -
LOCK WASHER
B 4 DIN 127 FOR WIRE CABLE TO HEAT EXCHANGER 		002 -
HEX. NUT
M 4 DIN 934-5 S FOR WIRE CABLE TO HEAT EXCHANGER 		002 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA