REAR AXLE

EPC / Mercedes / 1 / FG / FG 121.110 / 35 / 020
‹ ›

№- Name A* Part number A

REAR AXLE TUBE 		- XXX XXX XXX XXXX -
045 REAR AXLE
TUBE, LEFT, WITH THRUST ARM SUPPORT AND SCREW PLUG 		001 A 18 035 044 19  -
046 REAR AXLE
TUBE, RIGHT, WITH THRUST ARM SUPPORT 		001 A 18 035 039 19  -
047 BUSHING
FOR REAR AXLE TUBE, RIGHT 		002 A 18 035 101 50  -
048 LOCKING SCREW
VALID ONLY FOR REAR AXLE TUBE 180 350 44 19 		001 A 18 699 700 32  -
049 BREATHER
FOR REAR AXLE TUBE 		001 A 18 035 002 90  -

UNIVERSAL JOINT, SLIDING 		- XXX XXX XXX XXXX -
053 UNIVERSAL JOINT, SLIDING 001 A 18 035 005 13  -
054 WASHER
IN SLIDING YOKE 		001 A 18 035 701 52  -
055 LOCKING RING
IN SLIDING YOKE 		001 A 00 099 429 41  -
056 SLIDING SLEEVE
WITH GUIDE PLATE IN SLIDING YOKE 		001 A 18 035 007 13  -
LOCKING RING
32 X 1,5 DIN 471 IN SLIDING YOKE 		002 -
057 CYLINDRICAL ROLLER
IN SLIDING YOKE 		132 A 18 098 100 86  -
058 WASHER
IN SLIDING YOKE 		001 A 18 835 700 52  -
059 LOCKING RING
48 X 1,75 DIN 472 IN SLIDING YOKE 		001 -
060 UNIVERSAL CROSS 001 A 18 035 700 13  -
061 NEEDLE BEARING BUSHING 004 A 12 035 701 14  -
NEEDLE
2,5 X 11,8 II DIN 5402 		100 -
062 SNAP RING 2.25 MM THICK
OPTIONAL 		NB A 12 099 401 35  -
SNAP RING 2.35 MM THICK
OPTIONAL 		NB A 12 099 404 35  -
SNAP RING 2.40 MM THICK
OPTIONAL 		NB A 12 099 406 35  -
SNAP RING 2.45 MM THICK
OPTIONAL 		NB A 12 099 407 35  -
SNAP RING 2.55 MM THICK
OPTIONAL 		NB A 12 099 408 35  -
064 TIGHTENING SCREW
FOR SLIDING YOKE, INSIDE 		001 A 18 035 300 76  -
LOCK WASHER
B 10 DIN 127 FOR SLIDING YOKE, INSIDE 		001 -
066 SHIM 1.00 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 330 52  -
SHIM 1.10 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 331 52  -
SHIM 1.20 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 333 52  -
SHIM 1.30 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 335 52  -
SHIM 1.40 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 337 52  -
SHIM 1.50 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 339 52  -
SHIM 1.60 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 341 52  -
SHIM 1.70 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 343 52  -
SHIM 1.80 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 345 52  -
SHIM 1.90 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 347 52  -
SHIM 2.00 MM THICK
FOR SLIDING YOKE, INSIDE OPTIONAL 		001 A 18 035 349 52  -
068 RUBBER SLEEVE 001 A 18 035 705 91  -

REAR AXLE SHAFT 		- XXX XXX XXX XXXX -
070 REAR AXLE, LEFT 001 A 18 035 013 10  -
071 WHEEL FIXING PIN 005 A 12 040 101 71  -
072 REAR AXLE SHAFT, RIGHT 001 A 18 035 014 10  -
073 WHEEL FIXING PIN 005 A 12 040 101 71  -
074 GROOVED BEARING
FOR REAR AXLE SHAFT 		002 A 18 398 100 25  -
075 LOCKING PLATE
FOR REAR AXLE SHAFT 		002 A 18 335 303 73  -
076 GROOVED NUT
FOR REAR AXLE SHAFT 		002 A 15 335 700 26  -
HEX.-HD. SCREW
M 10 X 22 DIN 933-8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING 		004 -
HEX.-HD. SCREW
M 7 X 22 DIN 933-8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING 		004 -
HOSE CLAMP
S 9 N 262 		002 -
HOSE STRAP
9 X 0,4 N 263 ORDER BY THE METER 		NB -
081 BRAKE DRUM 002 A 12 042 106 01  -
082 SPHERICAL COLLAR NUT
FOR BRAKE DRUM AT WHEEL PIN, REAR AXLE SHAFT ALSO SEE GROUP 33 AND 40 		004 A 11 099 000 59  -

REAR AXLE SUSPENSION 		- XXX XXX XXX XXXX -
085 CONNECTION PIN
FOR REAR AXLE SUSPENSION 		001 A 18 035 106 74  -
086 SLEEVE 26.0 MM LONG
OPTIONAL WITH 180 351 14 53 BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN 		002 A 18 035 101 53  -
SLEEVE 25.8 MM LONG
OPTIONAL WITH 180 351 14 53 BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN 		002 A 18 035 118 53  -
SLEEVE 25.6 MM LONG
OPTIONAL WITH 180 351 14 53 BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN 		002 A 18 035 117 53  -
SLEEVE 25.4 MM LONG
OPTIONAL WITH 180 351 14 53 BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN 		002 A 18 035 116 53  -
SLEEVE 25.2 MM LONG
OPTIONAL WITH 180 351 14 53 BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN 		002 A 18 035 115 53  -
SLEEVE 25.0 MM LONG
BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN OPTIONAL WITH 180 351 01 53/18 53/17 53/16 53/15 53 		002 A 18 035 114 53  -
087 WASHER 2.00 MM THICK
FOR REAR AXLE TUBE, OUTSIDE 		002 A 18 035 114 52  -
088 SHIM 1.90 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 113 52  -
SHIM 2.00 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 114 52  -
SHIM 2.10 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 115 52  -
SHIM 2.20 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 116 52  -
SHIM 2.30 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 117 52  -
SHIM 2.40 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 118 52  -
SHIM 2.50 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 119 52  -
SHIM 2.60 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 127 52  -
SHIM 2.70 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 128 52  -
SHIM 2.80 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 129 52  -
SHIM 2.90 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 130 52  -
SHIM 3.00 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 120 52  -
SHIM 3.10 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 131 52  -
SHIM 3,20 MM THICK
OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE 		002 A 18 035 132 52  -
089 SHIM
ON CONNECTION PIN AT REAR AXLE TUBE MOUNTING, OUTSIDE 		002 A 18 035 103 51  -
090 RUBBER RING
ON SHIMS 		004 A 18 035 109 86  -
091 KEY
FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 A 18 035 100 74  -
LOCK WASHER
B 8 DIN 127 FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 -
HEX. NUT
M 8 DIN 934-5 S FOR CONNECTION PIN AT REAR AXLE HOUSING 		001 -
094 LOCKING RING
IN CONNECTION PIN 		001 A 18 099 403 41  -
COVER
20 DIN 443 IN CONNECTION PIN 		001 -
096 SPACER SLEEVE
ON CONNECTION PIN, FRONT 		001 A 18 035 111 53  -
097 LOCKING PLATE
FOR CONNECTION PIN AT SILENT BLOCK IN SUPPORT 		001 A 18 099 401 12  -
098 HEX. -HD. SCREW
FOR CONNECTION PIN AT SILENT BLOCK IN SUPPORT 		001 A 18 099 704 30  -
GREASE FITTING
A 6 DIN 71412 IN REAR EYE FOR REAR AXLE TUBE, RIGHT 		001 -
099 GREASE FITTING
IN FRONT EYE FOR REAR AXLE TUBE, RIGHT 		001 A 00 099 711 88  -
100 RUBBER MOUNTING
IN SUPPORT, REAR AXLE SUSPENSION 		001 A 11 135 002 75  -
101 SUPPORT WITH RETAINER
FOR REAR AXLE SUSPENSION 		001 A 18 035 009 32  -
LOCK WASHER
B 10 DIN 127 FOR RUBBER MOUNTING IN SUPPORT 		002 -
HEX.-HD. SCREW
M 10 X 35 DIN 931-8 G FOR RUBBER MOUNTING IN SUPPORT 		002 -
104 THRUST ARM, LEFT
FOR REAR AXLE 		001 A 18 035 000 29  -
105 THRUST ARM, RIGHT
FOR REAR AXLE 		001 A 18 035 001 29  -
106 CYLINDRICAL SCREW
FOR MOUNTING SHOCK ABSORBER 		004 A 12 099 009 20  -
107 CYLINDRICAL SCREW
FOR MOUNTING SHOCK ABSORBER 		004 A 12 099 010 20  -
110 RUBBER MOUNTING
FOR THRUST ARM, REAR FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 035 207 65  -
111 WASHER
FOR RUBBER MOUNTING, WHEEL SIDE FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 035 205 76  -
112 WASHER
FOR RUBBER MOUNTING, SCREW SIDE FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 035 206 76  -
113 LOCKING PLATE
FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 099 404 12  -
114 HEX.-HD. SCREW
FOR THRUST ARM AT REAR AXLE TUBE 		002 A 12 099 000 01  -
115 RUBBER MOUNTING
FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR 		001 A 12 135 100 48  -
116 WASHER
FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR 		001 A 12 835 000 67  -
117 LOCKING PLATE
FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR 		001 A 18 035 103 73  -
HEX. NUT
M 22 X 1,5 DIN 936-5S FOR REAR AXLE SUSPENSION, TOP, AT BODY FLOOR 		001 -
120 RUBBER RING, BOTTOM
FOR REAR AXLE SUSPENSION, BOTTOM, AT BODY FLOOR 		001 A 12 135 102 48  -
121 CROSS ARM
FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 101 96  -
122 SHACKLE
OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 105 40  -
SHACKLE
OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 114 40  -
123 SHACKLE
OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 104 40  -
SHACKLE
OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR 		001 A 18 035 113 40  -
HEX. -HD. SCREW
M 12 X 1,5 X 25 DIN 961-8 G FOR SHACKLE AT CROSS STRUT 		001 -
LOCK WASHER
B 12 DIN 127 FOR SHACKLE AT CROSS STRUT 		001 -
HEX. NUT
M 12X1,5 DIN 934-5 S FOR SHACKLE AT CROSS STRUT 		001 -
HEX.-HD. SCREW
M 12X1, 5X35 DIN 960-8 G FOR CROSS STRUT AT SUPPORT 		001 -
LOCK WASHER
B 12 DIN 127 FOR CROSS STRUT AT SUPPORT 		001 -
129 RUBBER MOUNTING
FOR CROSS STRUT AT SUPPORT 		001 A 18 035 100 48  -
130 WASHER
FOR CROSS STRUT 		001 A 18 035 100 76  -
131 SPACER TUBE
FOR CROSS STRUT 		001 A 18 035 106 53  -
132 RUBBER BUFFER 002 A 18 035 107 44  -
133 CUP
FOR CROSS STRUT 		002 A 18 035 103 43  -
LOCK WASHER
B 12 DIN 127 FOR CUP, RUBBER BUFFER AT CROSS STRUT 		001 -
HEX. NUT
M 12X1,5 DIN 934-5 S FOR CUP, RUBBER BUFFER AT CROSS STRUT 		001 -
136 RUBBER MOUNTING
FOR THRUST ARM, FRONT, AT BODY FLOOR 		002 A 11 135 200 65  -
137 CUP
FOR RUBBER MOUNTING FOR THRUST ARM AT BODY FLOOR 		002 A 18 035 201 67  -
138 CASTLE COLLAR NUT
FOR THRUST ARM AT BODY FLOOR 		002 A 18 035 203 72  -
COTTER PIN
3 X 28 DIN 94 ST FOR THRUST ARM AT BODY FLOOR 		002 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA