CLUTCH

EPC / Mercedes / 1 / FG / FG 121.110 / 25 / 012
‹ ›

№- Name A* Part number A

CLUTCH 		- XXX XXX XXX XXXX -
001 CLUTCH WITHOUT
CLUTCH DISC 		001 A 18 025 007 04  -
002 SPRING 003 A 00 025 204 27  -
003 LEVER 003 A 00 025 209 13  -
004 SWIVEL PIN 003 A 00 025 203 74  -
005 TIGHTENING PIN
6 X 18 DIN 1481 		003 -
RING
FOR ADJUSTING NUT
Replaced by: A  000 252 01 51 		- A 00 025 200 51  -
006 RING
FOR ADJUSTING NUT 		003 A 00 025 201 51  -
007 ADJUSTING NUT 003 A 00 025 204 72  -
008 SPRING RETAINER 009 A 00 025 206 78  -
009 SPRING OUTER DIA. 29 MM
50 MM HIGH 		009 A 00 025 216 20  -
010 SPRING SLEEVE 009 A 00 025 202 35  -
011 CLUTCH PRESSURE PLATE 001 A 00 025 215 06  -
015 CLUTCH DISC 001 A 00 025 022 03  -
016 CLUTCH LINING 001 A 18 725 204 10  -
16a CLUTCH LINING
FLYWHEEL SIDE 		001 A 12 125 201 10  -
017 HOLLOW RIVET
FOR CLUTCH LINING 		012 A 13 699 000 95  -
018 LOCK WASHER
B 8 DIN 127 FOR PRESSURE PLATE AT FLYWHEEL 		006 -
019 HEX. -HD. SCREW
M 8X20 DIN 933 - 8 G FOR PRESSURE PLATE AT FLYWHEEL 		006 -

CLUTCH HOUSING 		- XXX XXX XXX XXXX -
025 CLUTCH HOUSING 001 A 12 125 002 05  -
CLUTCH HOUSING 001 A 12 125 003 05  -
026 CYLINDRICAL PIN 001 A 18 099 100 60  -
STUD BOLT
M 6X10 DIN 835 - 5 S FOR BRACKET, SPRING SUSPENSION 		001 -
028 STUD BOLT
M 7X22 DIN 835 - 5 S FOR BRACKET, SPRING SUSPENSION 		001 -
029 STUD BOLT
FOR BRACKET, SPRING SUSPENSION 		001 A 12 199 000 05  -
030 SLEEVE AT CLUTCH HOUSING 001 A 12 025 400 97  -
031 GASKET HOLDER
FOR SLEEVE AT CLUTCH HOUSING 		001 A 12 025 400 58  -
032 HEX. -HD. SCREW
M 6X12 DIN 933-8 G FOR SLEEVE AT CLUTCH HOUSING 		004 -
033 SPRING WASHER
B 6 DIN 137 FOR SLEEVE AT CLUTCH HOUSING 		004 -
034 BREATHER SCREW 001 A 12 025 100 71  -
035 SEALING RING
A 12X16 DIN 7603 A1 		001 -
036 FIXING PLATE
FOR EXHAUST SUPPORT 		001 A 12 149 001 44  -
037 LOCK WASHER
B 12 DIN 127 FOR CLUTCH HOUSING AT TRANSMISSION HOUSING 		004 -
038 HEX. -HD. SCREW
M 12X50 DIN 931-8 G FOR CLUTCH HOUSING AT TRANSMISSION HOUSING 		002 -
039 WASHER
13 DIN 125 FOR CLUTCH HOUSING AT TRANSMISSION HOUSING 		004 -
040 HEX. NUT
M 12 DIN 934-5 S FOR CLUTCH HOUSING AT TRANSMISSION HOUSING 		004 -
041 HEX. -HD. SCREW
M 12X55 DIN 931-8 G FOR CLUTCH HOUSING AT TRANSMISSION HOUSING 		002 -
042 COVER PLATE
FOR CLUTCH HOUSING 		001 A 18 025 002 56  -
044 HEX. -HD. SCREW
M 6X42 DIN 931-8 G FOR COVER PLATE AT CLUTCH HOUSING 		001 -
HEX. -HD. SCREW
M 6X40 DIN 931-8 G FOR COVER PLATE AT CLUTCH HOUSING 		001 -
HEX. -HD. SCREW
M 6X25 DIN 931-8 G FOR COVER PLATE AT CLUTCH HOUSING 		002 -
045 WASHER
6,4 DIN 125 FOR COVER PLATE AT CLUTCH HOUSING 		002 -
046 LOCK WASHER
B 6 DIN 127 FOR COVER PLATE AT CLUTCH HOUSING 		002 -
047 HEX. NUT
M 6 DIN 934 - 5 S FOR COVER PLATE AT CLUTCH HOUSING 		002 -

RELEASE PARTS 		- XXX XXX XXX XXXX -
050 CLUTCH RELEASE
BEARING WITH RELEASE BODY 		001 A 12 125 001 15  -
051 RELEASE BEARING 001 A 12 125 400 10  -
052 RELEASE FORK
FOR CLUTCH 		001 A 18 029 301 11  -
053 SPRING CLAMP
FOR RELEASE FORK AT RELEASE BODY 		002 A 12 099 301 25  -
054 SNAP RING
R 16 DIN 71805 FOR RELEASE FORK AT BALL PIN 		001 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA