| №- | Name | A* | Part number | A |
|---|---|---|---|---|
BATTERY AND STARTER CABLE |
- | XXX XXX XXX XXXX | - | |
| 001 | BATTERY | 001 | A 00 054 148 01 | - |
| BATTERY EXPORT, SPECIAL REQUEST TROPICAL DESIGN |
001 | A 00 054 129 01 | - | |
| SPECIAL COLD-START BATTERY SPECIAL REQUEST FOR REGIONS WITH COLD TEMPARATURES |
001 | A 00 054 160 01 | - | |
| 002 | FIXING FRAME | 001 | A 12 054 003 23 | - |
| 003 | TIGHTENING SCREW FOR HOLDING BATTERY |
002 | A 12 054 101 24 | - |
| LOCK WASHER B 6 DIN 127 FOR HOLDING BATTERY |
002 | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR HOLDING BATTERY |
002 | - | ||
| INSULATING HOSE, 20-MM LONG B 16X18 SW DIN 40621 ON ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER |
002 | - | ||
| 004 | RUBBER PLUG FOR BLIND-HOLE IN FRONT WALL |
007 | A 00 098 703 15 | - |
| 006 | STARTER CABLE FROM +POLE BATTERY TO STARTER |
001 | A 13 654 014 30 | - |
| 007 | RUBBER PROTECTIVE CAP FOR STARTER CABLE |
001 | A 13 654 600 35 | - |
| 07a | GROMMET FOR STARTER CABLE THROUGH ENGINE ROOM DAMPING |
001 | A 18 699 704 81 | - |
| 008 | GROUND CABLE FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING |
- | A 18 054 000 31 | - |
| GROUND CABLE FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING |
- | A 18 054 004 31 | - | |
| 009 | GROMMET FOR GROUND CABLE THROUGH FIXING ANGLE, FRONT WALL |
001 | A 00 099 734 81 | - |
CABLES |
- | XXX XXX XXX XXXX | - | |
| 015 | MAIN CABLE HARNESS | - | A 12 154 014 05 | - |
| MAIN CABLE HARNESS | - | A 12 154 015 05 | - | |
| 016 | HOUSING, LOWER PART WITH SOCKET IS INCLUDED IN MAIN CABLE HARNESS |
001 | A 00 054 506 28 | - |
| 017 | GASKET BETWEEN HOUSING, UPPER PART AND LOWER PART IS INCLUDED IN MAIN CABLE HARNESS |
001 | A 00 054 500 80 | - |
| CABLE HARNESS IN JACKET TUBE |
- | A 12 154 019 09 | - | |
| CABLE HARNESS IN JACKET TUBE |
- | A 12 154 020 09 | - | |
| 018 | ELECTRIC CABLE FOR GLOW PLUG RESISTOR TO GLOW PLUG |
- | A 12 154 017 38 | - |
| ELECTRIC CABLE FOR GLOW PLUG RESISTOR TO GLOW PLUG |
- | A 12 054 013 38 | - | |
| 020 | TAIL LAMP CABLE HARNESS | 001 | A 12 154 008 07 | - |
| 026 | GROUND CABLE FROM ENGINE TO FRONT WALL |
001 | A 12 154 001 41 | - |
| 027 | SCREW WITH LOCKING PLATE FOR GROUND CABLE AT PEDAL FLOOR |
001 | A 12 042 002 27 | - |
| HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE AT PEDAL FLOOR |
001 | - | ||
| 031 | CABLE CONNECTOR, 5-POLE FOR TAIL LIGHT HARNESS |
002 | A 00 054 619 41 | - |
| 032 | CABLE CONNECTOR, 5-POLE FOR STEERING SPINDLE HARNESS |
001 | A 00 054 606 41 | - |
| 033 | CABLE CONNECTOR, 2-POLE FOR HEATING BLOWER CONNECTION |
002 | A 00 054 618 41 | - |
| LENS-HD. SHEET METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5-POLE, AT WHEEL ARCH PAN |
002 | - | ||
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR AT FRONT WALL |
004 | - | ||
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
004 | - | ||
| FIXING CLAMP FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT |
001 | A 18 699 502 20 | - | |
| LENS-HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT |
001 | - | ||
| 034 | CABLE HARNESS FROM 2-POLE CABLE CONNECTOR TO REVERSE DRIVE LIGHT |
001 | A 12 054 017 38 | - |
| 035 | BRACKET FOR CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH |
001 | A 18 054 600 43 | - |
| 036 | BRACKET FOR CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH |
001 | A 18 054 601 43 | - |
| 36a | GROMMET AT BRACKET FOR CABLE HARNESS |
002 | A 00 099 731 81 | - |
| 037 | GROMMET FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 18 199 700 81 | - |
| 038 | GROMMET FOR MAIN CABLE HARNESS AT FRONT WALL |
002 | A 00 099 727 81 | - |
| 38a | GROMMET FOR BLINKER LIGHT AT WHEEL ARCH FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 099 722 81 | - |
| 039 | CLIP FOR MAIN CABLE HARNESS AT FRONT WALL |
005 | A 00 098 833 78 | - |
| 040 | CLIP FOR MAIN CABLE HARNESS AT FRONT WALL |
- | A 00 098 834 78 | - |
| CLIP FOR MAIN CABLE HARNESS AT FRONT WALL |
- | A 00 098 853 78 | - | |
| FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 500 37 | - | |
| LENS-HD. SCREW AM 4X12 DIN 7985 -4S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | ||
| FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 501 35 | - | |
| CAGE CLIP WITH NUT FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 099 022 91 | - | |
| LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | ||
| FIXING CLAMP FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | A 18 199 500 20 | - | |
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | ||
| FIXING CLAMP FOR MAIN CABLE HARNESS AT FRAME CROSS MEMBER, FRONT |
002 | A 12 199 500 22 | - | |
| HEX. -HD. SHEET METAL SCREW B 6,3X16 DIN 7976 FOR MAIN CABLE HARNESS AT FRAME CROSS MEMBER, FRONT |
002 | - | ||
| FIXING CLAMP FOR CABLE FIXING FOOT DIMMER SWITCH AND GROUND CONNECTION |
001 | A 15 399 503 22 | - | |
| LENS-HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR CABLE FIXING FOOT DIMMER SWITCH AND GROUND CONNECTION |
001 | - | ||
| 042 | GROMMET FOR FUEL TRANSMITTER PIPE |
001 | A 00 099 717 81 | - |
| CLIP | 008 | A 00 098 833 78 | - | |
| CLIP | 005 | A 00 098 834 78 | - | |
| LENS-HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE ELECTR. TRANSMITTER AT REAR CROSS MEMBER |
001 | - | ||
| 056 | FIXING SHACKLE FOR TAIL LIGHT CABLE, LEFT AND RIGHT IS FIXED TOGETHER WITH MUDGUARD AND WHEEL ARCH |
008 | A 12 054 601 82 | - |
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION, TAIL LIGHT |
002 | - | ||
| LOCK WASHER B 4 DIN 127 FOR GROUND CONNECTION, TAIL LIGHT |
002 | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR GROUND CONNECTION, TAIL LIGHT |
002 | - | ||
| 061 | CABLE COVER PLATE FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
001 | A 12 054 600 81 | - |
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
002 | - | ||
| FIXING CLAMP FOR CABLE HARNESS TO STEERING SPINDLE, TO STARTER MOTOR AND TO REVERSE DRIVE LIGHT AT FRONT WALL |
001 | A 13 699 504 20 | - | |
| 067 | HOSE PIECE, DIA. 18X20-MM, 20-MM LONG OVER STARTER CABLE AND MAIN CABLE HARNESS ORDER BY THE METER |
003 | A 00 099 747 82 | - |
| 071 | FUSE BOX WITH FUSE AND BRASS SCREW |
001 | A 18 054 009 50 | - |
| 072 | COVER | 001 | A 00 054 502 03 | - |
| FUSE 12 AMP. 8 DIN 72581 |
011 | - | ||
| FUSE 35 AMP. 25 DIN 72581 |
001 | - | ||
| 074 | BRACKET, LOWER PART FOR FUSE BOX |
001 | A 12 154 505 40 | - |
| 075 | BRACKET, UPPER PART FOR FUSE BOX |
001 | A 12 154 005 73 | - |
| LENS-HD. SCREW AM 6X12 DIN 7985-4 S FOR BRACKET AT BODY FRONT END |
002 | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET AT BODY FRONT END |
002 | - | ||
| LENS-HD. SHEET METAL SCREW BZ 3,9X19 DIN 7981 FOR BRACKET, UPPER PART, AT LOWER PART |
002 | - | ||
| SPRING NUT FOR BRACKET, UPPER PART, AT LOWER PART |
002 | A 00 099 413 45 | - | |
INSTRUMENTS AND SWITCHES |
- | XXX XXX XXX XXXX | - | |
| 080 | PUSH-PULL SWITCH FOR INSTRUMENT LIGHTING |
001 | A 00 054 506 11 | - |
| 081 | ESCUTCHEON | 001 | A 12 054 500 72 | - |
| 082 | FELT RING | 001 | A 00 099 720 40 | - |
| 82a | BUTTON | 001 | A 12 054 012 83 | - |
| 083 | PULL SWITCH FOR HEADLIGHTS, FOGLIGHTS, AND CLEARANCE LIGHTS |
001 | A 11 054 000 58 | - |
| CABLE BRACKET 5X0,3X135 N 286 FOR OAPILLARY TUBE AT HEATING HOSE |
001 | - | ||
| SEALING RING A 14X18 DIN 7603 A1 FOR TELE-THERMOMETER |
001 | - | ||
| 084 | COMBI-INSTRUMENT WITH KILOMETER GRADUATION, RATIO 0.875 |
- | A 12 154 204 01 | - |
| 084 | COMBI-INSTRUMENT WITH KILOMETER GRADUATION, RATIO 0.875 SPECIAL REQUEST REAR AXLE RATIO 1:4.1 TIRES 6.4-15 |
- | A 12 154 204 01 | - |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION, RATIO 0.875 |
- | A 12 154 211 01 | - | |
| COMBI-INSTRUMENT WITH MPH GRADUATION, RATIO 1.41 EXPORT, SPECIAL REQUEST |
001 | A 12 154 205 01 | - | |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION, RATIO 0.8075 EXPORT, SPECIAL REQUEST TIRES 6.40-15 |
001 | A 12 154 212 01 | - | |
| COMBI-INSTRUMENT WITH MPH GRADUATION, RATIO 1.3 EXPORT, SPECIAL REQUEST TIRES 6.40-15 |
001 | A 12 154 213 01 | - | |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION, RATIO 0.96 SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-13 OR 6.70-13 |
001 | A 12 154 214 01 | - | |
| COMBI-INSTRUMENT WITH MPH GRADUATION, RATIO 1.54 SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-13 OR 6.70-13 |
001 | A 12 154 215 01 | - | |
| 085 | KILOMETER COUNTER | 001 | A 00 254 214 06 | - |
| MILEAGE COUNTER EXPORT, SPECIAL REQUEST |
001 | A 00 254 221 06 | - | |
| KILOMETER COUNTER SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 00 254 234 06 | - | |
| MILEAGE COUNTER SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 00 254 235 06 | - | |
| KILOMETER COUNTER SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-13 OR 6.70-13 |
001 | A 00 254 236 06 | - | |
| MILEAGE COUNTER SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-13 OR 6.70-13 |
001 | A 00 254 237 06 | - | |
| 086 | OIL PRESSURE GAUGE | 001 | A 00 054 271 02 | - |
| 087 | (DEGREESC) |
001 | A 00 054 287 05 | - |
| 088 | FUEL GAUGE | 001 | A 00 054 244 03 | - |
| 089 | TENSION SPRING FOR COMBI-INSTRUMENT FIXING |
002 | A 12 099 317 10 | - |
| 090 | RUBBER FRAME FOR COMBI-INSTRUMENT |
001 | A 12 054 202 80 | - |
| 091 | LAMP SOCKET | 005 | A 00 054 508 19 | - |
| BULB H 12 V 2 W DIN 72601 |
006 | - | ||
| 100 | CLOCK | 001 | A 12 054 206 11 | - |
| 101 | LAMP SOCKET | 001 | A 00 054 507 19 | - |
| BULB H 12 V 2 W DIN 72601 |
001 | - | ||
| 109 | DIMMER RESISTOR FOR INSTRUMENT LIGHTING |
001 | A 00 054 508 31 | - |
| CLIP FOR HOUSING, UPPER PART WITH LOWER PART, AT GLOVE BOX CASING |
002 | A 00 098 834 78 | - | |
| 113 | SWITCH FOR TURN-INDICATOR AND DISTANCE BLINKER SYSTEM |
001 | A 00 054 587 24 | - |
| REVERSING SWITCH FOR TURN-INDICATOR BLINKER SYSTEM SPECIAL REQUEST OMISSION OF DISTANCE BLINKER LIGHT SYSTEM |
001 | A 00 054 590 24 | - | |
| 114 | BLINKER LEVER KNOB, BLACK | 001 | A 18 054 504 37 | - |
| BLINKER LEVER KNOB, IVORY COLOURED SPECIAL REQUEST |
001 | A 18 054 505 37 | - | |
| 116 | BLINKER TRANSMITTER | 001 | A 00 054 423 32 | - |
| HEX. -HD. SCREW M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER AT BRACKET FUSE BOX |
002 | - | ||
| LOCK WASHER B 6 DIN 127 FOR BLINKER TRANSMITTER AT BRACKET FUSE BOX |
002 | - | ||
| GAGE CLIP WITH NUT FOR BLINKER TRANSMITTER AT BRACKET FUSE BOX |
002 | A 00 099 022 91 | - | |
| 122 | OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO HOSE |
- | A 18 054 013 60 | - |
| OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO COUPLING PIECE |
- | A 12 154 003 60 | - | |
| CONNECTING PIECE FOR OIL PRESSURE GAUGE PIPE |
- | A 12 854 200 47 | - | |
| OIL PRESSURE GAUGE PIPE FROM CONNECTING PIECE TO HOSE |
- | A 12 154 004 60 | - | |
| SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET |
002 | - | ||
| HEX. NUT BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET |
001 | - | ||
| 127 | RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END ORDER BY THE METER |
NB | A 00 098 709 32 | - |
| 128 | FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | A 13 699 505 01 | - |
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | - | ||
| FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE, CAPILLARY PIPE AND GLOW PLUG CABLE |
- | A 18 199 500 20 | - | |
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE, CAPILLARY PIPE AND GLOW PLUG CABLE |
- | - | ||
| 130 | HOSE FOR OIL PRESSURE GAUGE PIPE |
- | A 12 154 001 59 | - |
| HOSE FOR OIL PRESSURE GAUGE PIPE |
- | A 12 154 002 59 | - | |
| GROMMET FOR CAPILLARY PIPE CUT OF IF NECESSARY |
001 | A 18 699 706 81 | - | |
| 131 | STOP LIGHT SWITCH SEE GROUP 42 |
001 | A 00 054 522 09 | - |
| 132 | FOOT DIMMER SWITCH | 001 | A 00 054 504 12 | - |
| 133 | INSULATING PLATE FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
001 | A 13 654 501 58 | - |
| LENS-HD. COUNTERSUNK SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | - | ||
| 135 | CAGE CLIP WITH NUT FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | A 00 099 025 91 | - |
| 136 | GROMMET FOR CABLE TO FOOT DIMMER SWITCH |
001 | A 00 099 727 81 | - |
| 137 | SPEEDOMETER CABLE, 1.750-MM LONG |
001 | A 12 054 203 07 | - |
| 139 | FIXING CLAMP, LEFT FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT |
001 | A 12 099 500 01 | - |
| LENS-HD. SCREW AM 5X10 DIN 7985-4 S FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT |
002 | - | ||
| WASHER FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT |
001 | A 12 099 031 40 | - | |
| LOCK WASHER B 5 DIN 127 FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT |
002 | - | ||
| CLIP FOR SPEEDOMETER CABLE AT PEDAL FLOOR |
002 | A 00 098 834 78 | - | |
| 141 | GROMMET FOR SPEEDOMETER CABLE THROUGH FORK SUPPORT |
- | A 18 099 712 81 | - |
| 141 | GROMMET FOR SPEEDOMETER CABLE THROUGH FORK SUPPORT |
- | A 18 099 712 81 | - |
| 142 | GROMMET FOR LOCKING OF 3RD PASSAGE AT FORK SUPPORT |
001 | A 18 098 700 44 | - |
| 150 | HORN | 001 | A 00 154 220 20 | - |
| HORN SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 054 271 20 | - | |
| HEX. -HD. SCREW M 10X28 DIN 931-8 G FOR HORN AT BRACKET |
001 | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN AT BRACKET |
001 | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN AT BRACKET |
001 | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN |
002 | - | ||
| CYLINDER SCREW AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT HORN |
002 | - | ||
| 151 | THREE-ELEMENT VOLTAGE REGULATOR FOR GENERATOR SEE ALSO GROUP 15 |
001 | A 00 015 455 06 | - |
| 152 | RUBBER BUSHING | 003 | A 00 015 402 50 | - |
| LENS-HD. SCREW AM 6X20 DIN 7985-4 S FOR GOVERNOR AT BRACKET, WHEEL ARCH PAN |
003 | - | ||
| LOCK WASHER B 6 DIN 127 FOR GOVERNOR AT BRACKET, WHEEL ARCH PAN |
003 | - | ||
| 153 | CABLE HARNESS FROM GENERATOR TO VOLTAGE REGULATOR |
001 | A 18 054 000 08 | - |
| 154 | GROMMET FOR CABLE FROM GENERATOR TO VOLTAGE REGULATOR |
003 | A 00 099 707 81 | - |
| 155 | RUBBER PROTECTIVE CAP FOR CABLE HARNESS AT GENERATOR |
002 | A 00 054 602 35 | - |
| 156 | PIPE FOR CABLE HARNESS AT GENERATOR |
001 | A 18 199 500 20 | - |
| AUXILIARY CABLE HARNESS SPECIAL REQUEST FOG LIGHT FOR CARS EXPORTED TO THE USA |
001 | A 12 154 017 09 | - | |
| FUSE BOX, 2-POLE SPECIAL REQUEST FOG LIGHT FOR CARS EXPORTED TO THE USA |
001 | A 00 054 503 01 | - | |
| CYLINDER SCREW AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRESH-AIR DUCT, LEFT SPECIAL REQUEST FOG LIGHT FOR CARS EXPORTED TO THE USA |
001 | - | ||
| CONTACTOR, 12 VOLT SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
001 | A 00 054 227 19 | - | |
| ELECTRIC CABLE, 80-MM LONG B 1 DIN 72551 SW FROM RELAY, TERMINAL 30, TO REALY, TERMINAL 86 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CAR |
001 | - | ||
| CABLE TERMINAL 4X0,8 N 261 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
005 | - | ||
| GROMMET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
005 | A 00 099 701 81 | - | |
GLOW STARTING SWITCH |
- | XXX XXX XXX XXXX | - | |
| 160 | GLOW STARTING SWITCH | - | A 00 054 513 17 | - |
| WIRE CABLE SEE GROUP 30 |
- | - | ||
| PIN WITH HEAD 4 F8X16X13,7 DIN 1434 FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | - | ||
| COTTER PIN 1X8 DIN 94 ST FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | - | ||
| 163 | BRACKET FOR WIRE CABLE |
- | A 12 154 001 73 | - |
| 164 | LEVER FOR GLOW STARTING SWITCH |
- | A 12 154 500 22 | - |
| 165 | BUTTON | - | A 11 054 003 83 | - |
| CLIP FOR FIXING OF CABLE AT BRACKET |
- | A 00 098 834 78 | - | |
| CYLINDER SCREW AM 4X15 DIN 84-4 S FOR FIXING OF WIRE CABLE AT BRACKET |
- | - | ||
| WASHER B 4,3 DIN 9021 FOR FIXING OF WIRE CABLE AT BRACKET |
- | - | ||
| LOCK WASHER B 4 DIN 127 FOR FIXING OF WIRE CABLE AT BRACKET |
- | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR FIXING OF WIRE CABLE AT BRACKET |
- | - | ||
| PIN WITH HEAD 4 F8X25X22,7 DIN 1434 FOR FIXING OF LEVER AT BRACKET |
- | - | ||
| WASHER 4,3 DIN 125 FOR FIXING OF LEVER AT BRACKET |
- | - | ||
| COTTER PIN 1X8 DIN 94 ST FOR FIXING OF LEVER AT BRACKET |
- | - | ||
| 175 | GLOW STARTING SWITCH WITHOUT WIRE CABLE |
- | A 12 154 005 57 | - |
| 176 | GLOW STARTING SWITCH | - | A 13 654 502 17 | - |
| OCTAGONAL NUT | - | A 00 099 022 51 | - | |
| 177 | SWITCH HANDLE FOR GLOW STARTING SWITCH |
- | A 12 054 011 83 | - |
| 178 | LEVER FOR WIRE CABLE OPERATION |
- | A 12 154 000 84 | - |
| TOOTHED WASHER J 6,4 DIN 6797 FOR FIXING PIN |
- | - | ||
| 179 | WASHER FOR FIXING PIN |
- | A 12 054 500 76 | - |
| LOCK WASHER B 6 DIN 127 FOR FIXING PIN |
- | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR FIXING PIN |
- | - | ||
| 180 | PRESSURE SPRING FOR GUIDE SLEEVE, STOP SPRING |
- | A 19 199 301 01 | - |
| BALL 6 MM III DIN 5401 FOR GUIDE SLEEVE, STOP SPRING |
- | - | ||
| HEX. -HD. SCREW M 5X28 DIN 931-8 G FOR LEVER AT SHIFTING SHAFT |
- | - | ||
| WASHER 5,3 DIN 433 FOR LEVER AT SHIFTING SHAFT |
- | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR LEVER AT SHIFTING SHAFT |
- | - | ||
| CYLINDER PIN 4 M6X16 DIN 7 FOR SHIFTING SHAFT AT GLOW STARTING SWITCH |
- | - | ||
| HEX. -HD. SCREW M 5X15 DIN 933-8 G FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | - | ||
| 181 | SPACER RING FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | A 13 654 500 52 | - |
| WASHER 5,3 DIN 433 FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | - | ||
| LOCK WASHER B 5 DIN 127 FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | - | ||
| WASHER 5,3 DIN 433 FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | - | ||
| COTTER PIN 1,5X12 DIN 94 ST FOR WIRE CABLE AT GLOW STARTING SWITCH |
- | - | ||
| 190 | GROMMET | 001 | A 00 099 724 81 | - |
| 191 | FIXING CLAMP | 001 | A 12 199 505 35 | - |
| CYLINDER SCREW AM 5X12 DIN 84-4 S FOR WIRE CABLE AT ANGLE, INJECTION PUMP |
001 | - | ||
| LOCK WASHER B 5 DIN 127 FOR WIRE CABLE AT ANGLE, INJECTION PUMP |
001 | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR WIRE CABLE AT ANGLE, INJECTION PUMP |
001 | - | ||
| HEX. -HD. SCREW M 6X15 DIN 933-8 G FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM |
- | - | ||
| WASHER A 6,4 DIN 9021 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM |
- | - | ||
| WASHER 6,4 DIN 433 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM |
- | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM |
- | - | ||
| 195 | RELEASE SPRING | - | A 12 099 315 10 | - |
| CLIP FOR WIRE CABLE AT INSTRUMENT PANEL |
- | A 00 098 833 78 | - | |
| RUBBER WASHER ABOVE WIRE CABLE GLOW STARTING SWITCH |
- | A 00 098 721 40 | - | |
| GROMMET FOR LOCKING OF BORE, WIRE CABLE, THROUGH PEDAL FLOOR |
- | A 00 098 702 44 | - | |
| 196 | GLOW CONTROL OPTIONAL |
001 | A 00 054 519 20 | - |
| GLOW CONTROL OPTIONAL |
001 | A 00 054 524 20 | - | |
| 197 | RESISTOR OPTIONAL |
001 | A 00 054 532 18 | - |
| GLOW PLUG RESISTOR OPTIONAL |
001 | A 00 054 522 18 | - | |
| 200 | SOCKET WITHOUT HAND LIGHT SPECIAL REQUEST |
001 | A 00 054 505 25 | - |
| ELECTRIC CABLE, 1000-MM LONG A 1 DIN 72551 SW ORDER BY THE METER SPECIAL REQUEST |
001 | - | ||
| INSULATING HOSE, 950-MM LONG B 3X3,8 SW DIN 40621 ORDER BY THE METER SPECIAL REQUEST |
001 | - | ||
| 201 | BRACKET FOR SOCKET SPECIAL REQUEST SOCKET FOR HAND LIGHT |
001 | A 12 054 511 95 | - |
| CYLINDER SCREW AM 5X10 DIN 84-4 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT |
002 | - | ||
| LOCK WASHER B 5 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT |
002 | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT |
002 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy