CLUTCH

EPC / Mercedes / 1 / FG / FG 121.042 / 25 / 015
‹ ›

№- Name A* Part number A

CLUTCH 		- XXX XXX XXX XXXX -

Replaced by: A  180 250 07 04 		- A 12 125 001 04  -

Replaced by: A  180 250 07 04 		- A 12 125 002 04  -

Replaced by: A  180 250 07 04 		- A 12 125 003 04  -
CLUTCH WITHOUT
CLUTCH PLATE
Replaced by: A  180 250 07 04 		- A 18 025 006 04  -
001 CLUTCH WITHOUT
CLUTCH PLATE 		001 A 18 025 007 04  -
002 THIGH SPRING 003 A 00 025 204 27  -
003 LEVER 003 A 00 025 209 13  -
004 SWIVEL PIN 003 A 00 025 203 74  -
005 DOWEL PIN
6X18 DIN 1481 		003 -
RING (FOR ADJUSTING NUT)
Replaced by: A  000 252 01 51 		- A 00 025 200 51  -
006 RING (FOR ADJUSTING NUT) 003 A 00 025 201 51  -
007 ADJUSTING NUT 003 A 00 025 204 72  -
SPRING RING 009 A 13 625 200 24  -
008 SPRING RETAINER 009 A 00 025 206 78  -
SPRING, 44.5 MM HIGH 009 A 00 025 200 20  -
SPRING, 49.5-MM
HIGH, 0.D., 25.5-MM 		009 A 00 025 211 20  -
SPRING, 50-MM
HIGH, 0.D., 29-MM
Replaced by: A  000 252 16 20 		- A 00 025 215 20  -
009 SPRING, 50-MM
HIGH, 0.D., 29-MM 		009 A 00 025 216 20  -
SPRING SLEEVE 009 A 00 025 200 35  -
010 SPRING SLEEVE 009 A 00 025 202 35  -
CLUTCH PRESSURE PLATE 001 A 00 025 210 06  -
CLUTCH PRESSURE PLATE 001 A 00 025 211 06  -
011 CLUTCH PRESSURE PLATE 001 A 00 025 215 06  -

Replaced by: A  000 250 45 03 		- A 12 125 001 03  -

Replaced by: A  000 250 45 03 		- A 12 125 002 03  -

Replaced by: A  000 250 45 03 		- A 12 125 003 03  -

Replaced by: A  000 250 45 03 		- A 12 125 004 03  -

Replaced by: A  000 250 45 03 		- A 12 125 005 03  -

Replaced by: A  000 250 45 03 		- A 12 125 008 03  -
CLUTCH PLATE
Replaced by: A  000 250 45 03 		- A 00 025 039 03  -
015 CLUTCH PLATE 001 A 00 025 045 03  -

Replaced by: A  110 252 00 10 		- A 12 125 200 10  -

Replaced by: A  110 252 00 10 		- A 18 725 204 10  -
CLUTCH LINING
Replaced by: A  110 252 00 10 		- A 12 125 201 10  -
016 CLUTCH LINING 002 A 11 025 200 10  -
017 HOLLOW RIVET
(FOR CLUTCH LINING) 		012 A 13 699 000 95  -
018 HEX. HEAD SCREW
M 8X20 DIN 933-8 G PRESSURE PLATE TO FLYWHEEL 		006 -
019 LOCK WASHER
B 8 DIN 127 PRESSURE PLATE TO FLYWHEEL 		006 -
REPLACED BY
128 250 03 05 TOGETHER WITH 1 SUPPORT 121 492 02 16 1 MOUNTING PLATE 121 490 02 44 2 HEX. HEAD SCREW M 8X40 DIN 931-8 G 		- A 18 025 002 05  -
REPLACED BY
128 250 03 05 TOGETHER WITH 1 SUPPORT 121 492 02 16 1 MOUNTING PLATE 121 490 02 44 2 HEX. HEAD SCREW M 8X40 DIN 931-8 G 		- A 18 025 006 05  -
REPLACED BY
128 250 03 05 TOGETHER WITH 1 DOWEL PIN (IN CRANKCASE) 180 991 01 62 1 DOWEL PIN (IN CLUTCH HOUSING) 180 991 02 62 IN 		- A 18 025 009 05  -
CLUTCH HOUSING
Replaced by: A  128 250 03 05 		- A 18 025 014 05  -
020 CLUTCH HOUSING 001 A 12 825 003 05  -
REPLACED BY
128 250 04 05 TOGETHER WITH 1 DOWEL PIN (IN CRANKCASE) 180 991 01 62 1 DOWEL PIN (IN CLUTCH HOUSING) 180 991 02 62 IN 		- A 18 025 010 05  -
CLUTCH HOUSING
Replaced by: A  128 250 04 05 		- A 18 025 015 05  -
CLUTCH HOUSING 001 A 12 825 004 05  -
CYLINDRICAL PIN 001 A 18 699 107 01  -
021 DOWEL PIN 001 A 18 099 100 60  -
STUD
(FOR SPRING SUSPENSION BRACKET) M 6X10 DIN 835-8 G 		001 -
STUD
(FOR SPRING SUSPENSION BRACKET) M 6X10 DIN 835-8 G 		001 -
022 STUD
M 7X22 DIN 835-5 S 		002 -
DOWEL PIN
(RECESSED, 8-MM DIA. TIGHT FIT) FOR USE WITH CLUTCH HOUSING WITH 8-MM DIA. DOWEL PIN AND INTERMEDIATE PLATE WITH 12-MM 		001 A 18 099 101 62  -
DOWEL PIN
(RECESSED, 12-MM DIA. TIGHT FIT) FOR USE WITH CLUTCH HOUSING WITH 12-MM DIA. DOWEL PIN AND INTERMEDIATE PLATE WITH 8-MM 		001 A 18 099 102 62  -
023 COVER, BOTTOM
(TO MARK T.D.C.) 		001 A 12 025 102 33  -
024 COVER, BOTTOM
(FOR INSPECTION HOLE) 		001 A 12 025 100 33  -
025 LOCK WASHER
B 6 DIN 127 COVER TO CLUTCH HOUSING 		004 -
026 HEX. HEAD SCREW
M 6X10 DIN 933-8 G COVER TO CLUTCH HOUSING 		004 -
027 BOOT 001 A 12 025 400 97  -
028 SEAL HOLDER
BOOT TO CLUTCH HOUSING 		004 A 12 025 400 58  -
029 HEX. HEAD SCREW
M 6X12 DIN 933-8 G BOOT TO CLUTCH HOUSING 		004 -
030 SPRING WASHER
B 6 DIN 137 BOOT TO CLUTCH HOUSING 		004 -
031 VENT SCREW 001 A 12 025 100 71  -
SEAL RING
A 12X16 DIN 7603 A1 NO LONGER FITTED 		- -
REPLACED BY
121 490 02 44 TOGETHER WITH 1 SUPPORT 121 492 02 16 2 HEX. HEAD SCREW M 8X40 DIN 931-8 G 4 RUBBER WASHER 121 155 01 81 4 		- A 12 149 200 18  -
REPLACED BY
121 490 02 44 TOGETHER WITH 2 HEX. HEAD SCREW M 8X40 DIN 931-8 G 4 RUBBER WASHER 121 155 01 81 4 PLATE WASHER 136 155 00 		- A 12 149 203 18  -
033 MOUNTING PLATE
(FOR EXHAUST SUSPENSION) 		001 A 12 149 002 44  -
HEX. HEAD SCREW
M 12X50 DIN 931-8 G CLUTCH HOUSING TO TRANSMISSION CASE 		002 -
HEX. HEAD SCREW
M 12X55 DIN 931-8 G CLUTCH HOUSING TO TRANSMISSION CASE 		002 -
WASHER
13 DIN 125 CLUTCH HOUSING TO TRANSMISSION CASE 		004 -
LOCK WASHER
B 12 DIN 127 CLUTCH HOUSING TO TRANSMISSION CASE 		004 -
HEX. NUT
M 12 DIN 934-5 S CLUTCH HOUSING TO TRANSMISSION CASE 		004 -
COVER PLATE
FOR CLUTCH HOUSING
Replaced by: A  180 250 02 56 		- A 18 025 000 56  -
040 COVER PLATE
FOR CLUTCH HOUSING 		001 A 18 025 002 56  -
COVER PLATE
FOR CLUTCH HOUSING 		001 A 18 625 106 10  -
GASKET
FOR CLUTCH HOUSING 		001 A 18 625 105 80  -
HEX. HEAD SCREW
M 6X12 DIN 933-8 G COVER PLATE TO CLUTCH HOUSING 		004 -
LOCK WASHER
B 6 DIN 127 COVER PLATE TO CLUTCH HOUSING 		004 -
HEX. HEAD SCREW
M 6X28 DIN 931-8 G COVER PLATE AND BRACKET TO CLUTCH HOUSING FOR CLUTCH HOUSING (PRESSURE DIE-CASTING) 		002 -
HEX. HEAD SCREW
M 6X42 DIN 931-8 G COVER PLATE AND BRACKET TO CLUTCH HOUSING FOR CLUTCH HOUSING (GRAVITY DIE-CASTING) 		002 -
WASHER
6,4 DIN 125 COVER PLATE AND BRACKET TO CLUTCH HOUSING 		001 -
WASHER
6,4 DIN 125 COVER PLATE AND BRACKET TO CLUTCH HOUSING 		002 -
LOCK WASHER
B 6 DIN 127 COVER PLATE AND BRACKET TO CLUTCH HOUSING 		002 -
HEX. NUT
M 6 DIN 934-5 S COVER PLATE AND BRACKET TO CLUTCH HOUSING 		002 -
044 CLUTCH RELEASE
BEARING WITH RELEASE BODY 		001 A 12 125 001 15  -
RELEASE
Replaced by: A  121 254 00 10 		- A 12 125 402 10  -
045 RELEASE 001 A 12 125 400 10  -
RELEASE YOKE
Replaced by: A  180 293 01 11 		- A 12 129 300 11  -
046 RELEASE YOKE 001 A 18 029 301 11  -
047 SPRING CLIP
(RELEASE YOKE TO RELEASE BODY) 		002 A 12 099 301 25  -
048 SNAP RING
(FOR RELEASE YOKE TO BALL PIN) R 16 DIN 71 805 		001 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA