| №- | Name | A* | Part number | A |
|---|---|---|---|---|
ANTISQUEAKS |
- | XXX XXX XXX XXXX | - | |
| ANTISQUEAK (5 TO 6-MM BITUMINIZED FELT CARDBOARD) FOR TOE-BOARD, LEFT AND RIGHT, TOP, CENTER FOR FRONT FLOOR, FRONT, LATERAL, LEFT |
NB | A 00 098 330 91 | - | |
| ANTISQUEAK (15-MM WAFFLE FACED FELT) FOR TOE-BOARD, LEFT, RIGHT, CENTER, FRONT, BOTTOM, LEFT STATE LENGTH AND WIDTH WHEN ORDERING |
NB | A 00 098 323 92 | - | |
| ANTISQUEAK (10-MM WAFFLE FACED FELT) FOR TUNNEL, TRANSMISSION COVER PLATE FOR CENTER TUNNEL, LEFT AND RIGHT STATE LENGTH AND WIDTH |
NB | A 00 098 322 92 | - | |
| ANTISQUEAK (3 TO 4-MM BITUMINIZED FELT CARDBOARD) (FOR REAR FLOOR) STATE LENGTH AND WIDTH WHEN ORDERING |
NB | A 00 098 329 91 | - | |
| 001 | ANTISQUEAK (FOR COWL, LEFT) |
001 | A 40 121 682 01 15 | - |
| 002 | ANTISQUEAK (FOR COWL, RIGHT) |
001 | A 40 121 682 02 15 | - |
| 003 | ANTISQUEAK, FRONT PANEL, UPPER PART, BOTTOM |
001 | A 40 121 680 00 25 | - |
| ANTISQUEAK, FRONT PANEL, UPPER PART, BOTTOM |
001 | A 40 121 680 01 25 | - | |
| 004 | ANTISQUEAK, 15-MM WAFFLE FACED FELT (FOR FRONT PANEL UPPER PART, LEFT) |
001 | A 40 121 682 03 15 | - |
| 005 | ANTISQUEAK, 15-MM WAFFLE FACED FELT (FOR FRONT PANEL UPPER PART, RIGHT) |
001 | A 40 121 682 04 15 | - |
| 006 | SUPPORTING PLATE (AT TOE-BOARD) |
001 | A 40 121 680 00 19 | - |
| LENS HEAD SHEET METAL SCREW B 3,9X9,5 DIN 7981 SUPPORTING PLATE TO TOE-BOARD |
002 | - | ||
| LENS HEAD SHEET METAL SCREW B 3,9X13 DIN 7981 SUPPORTING PLATE TO TOE-BOARD |
004 | - | ||
SEE ALSO GROUP 61 Replaced by: A 40 121 683 03 18 |
- | A 40 121 680 03 08 | - | |
| FLOOR (IN FRONT OF RIGHT FRONT SEAT) SEE ALSO GROUP 61 Replaced by: A 40 121 683 04 18 |
- | A 40 121 680 04 08 | - | |
| FLOOR (IN FRONT OF RIGHT FRONT SEAT) SEE ALSO GROUP 61 |
001 | A 40 121 683 04 18 | - | |
| LENS HEAD SHEET METAL SCREW (FLOOR TO FRAME FLOOR) B 3,9X9,5 DIN 7981 DBL 8451-21 |
010 | - | ||
| FRONT FLOOR, LEFT Replaced by: A 40 121 680 05 08 |
- | A 40 121 680 01 08 | - | |
| 011 | FRONT FLOOR, LEFT | 001 | A 40 121 680 05 08 | - |
| FRONT FLOOR, RIGHT Replaced by: A 40 121 680 06 08 |
- | A 40 121 680 02 08 | - | |
| 012 | FRONT FLOOR, RIGHT | 001 | A 40 121 680 06 08 | - |
| FASTENER (TO MOUNT RUBBER MAT) Replaced by: A 000 988 14 80 |
- | A 00 098 822 80 | - | |
| FASTENER (TO MOUNT RUBBER MAT) |
004 | A 00 098 814 80 | - | |
| LENS HEAD COUNTERSUNK WOOD SCREW (FASTENERS TO FLOOR) 4X17 DIN 7995 DBL 8451-21 |
004 | - | ||
| COUNTERSUNK SHEET METAL SCREW, CHROMIUM PLATED B 5,5X19 DIN 7982 VERCHROMT FRONT FLOOR TO FRAME FLOOR |
008 | - | ||
| SHEET METAL COUNTERSUNK WASHER FRONT FLOOR TO FRAME FLOOR |
008 | A 00 099 017 42 | - | |
| COVER PLATE (FOR SHIFTING LINKAGE) Replaced by: A 40 121 683 00 36 |
- | A 40 121 680 02 67 | - | |
| 013 | COVER PLATE (FOR SHIFTING LINKAGE) |
001 | A 40 121 683 00 36 | - |
| WASHER 5,3 DIN 433 COVER PLATE TO CENTER TUNNEL |
006 | - | ||
| HEX. HEAD TAPPING SCREW A M 5X15 DIN 7513 COVER PLATE TO CENTER TUNNEL |
006 | - | ||
| 015 | HOUSING | 001 | A 40 121 683 00 75 | - |
| FELT STRIP, 20X1, 150-MM LONG, NATURAL GREY ORDER BY THE METER |
NB | A 00 098 310 10 | - | |
| HEX. HEAD SCREW M 6X15 DIN 933-8 G HOUSING TO CENTER TUNNEL, FRONT |
003 | - | ||
| LOCK WASHER B 6 DIN 127 HOUSING TO CENTER TUNNEL, FRONT |
003 | - | ||
| WASHER 6,4 DIN 433 HOUSING TO CENTER TUNNEL, FRONT |
003 | - | ||
| 020 | COVERING, REAR | 001 | A 40 121 680 01 07 | - |
| 021 | LEAF SPRING | 002 | A 40 121 683 00 85 | - |
| 022 | HOLLOW RIVET (LEAF SPRINGS TO LEFT REAR FLOOR) A 6X12X18 DIN 7331 DBL 8451-12 |
004 | - | |
| 023 | RUBBER HOSE, 16-MM LONG ORDER BY THE METER |
001 | A 00 099 786 82 | - |
| ROUND HEAD WOOD SCREW (RUBBER HOSE TO LEFT REAR FLOOR) 6X40 DIN 7996 DBL 8451-21 |
001 | - | ||
| 024 | LOOP | 001 | A 40 121 680 00 54 | - |
| 025 | HOLLOW RIVET (LOOP TO FLOOR) A 6X12X18 DIN 7331 |
001 | - | |
| REPLACED BY | - | A 40 121 680 01 03 | - | |
| 026 | FLOOR COVERING, REAR FLOOR, LEFT STATE COLOR WHEN ORDERING |
001 | A 40 121 680 03 03 | - |
| TWIST NAIL C 14X10 N 46 FLOOR COVERING TO LEFT REAR FLOOR |
001 | - | ||
| ROUND HEAD WOOD SCREW, CHROMIUM PLATED 3X10 DIN 7996 VERCHROMT FLOOR COVERING TO LEFT REAR FLOOR |
001 | - | ||
| COUNTERSUNK SHEET METAL WASHER, CHROMIUM PLATED FLOOR COVERING TO LEFT REAR FLOOR |
001 | A 00 098 505 62 | - | |
| 027 | COVERING, REAR FLOOR, RIGHT |
001 | A 40 121 680 02 07 | - |
| MOUNTING ANGLE | - | A 40 121 683 01 35 | - | |
| FLOOR COVERING, REAR FLOOR, RIGHT Replaced by: A 40 121 680 04 03 |
- | A 40 121 680 02 03 | - | |
| 030 | FLOOR COVERING, REAR FLOOR, RIGHT STATE COLOR WHEN ORDERING |
001 | A 40 121 680 04 03 | - |
| TWIST NAIL C 14X10 N 46 FLOOR COVERING TO RIGHT REAR FLOOR |
001 | - | ||
| ROUND HEAD WOOD SCREW, CHROMIUM PLATED 3X10 DIN 7995 VERCHROMT FLOOR COVERING TO RIGHT REAR FLOOR |
001 | - | ||
| COUNTERSUNK SHEET METAL WASHER, CHROMIUM PLATED FLOOR COVERING TO RIGHT REAR FLOOR |
001 | A 00 098 505 62 | - | |
| COUNTERSUNK SHEET METAL SCREW B 5,5X16 DIN 7982 DBL 8451-21 RIGHT REAR FLOOR COVERING TO FRAME FLOOR |
002 | - | ||
| COUNTERSUNK SHEET METAL SCREW, CHROMIUM PLATED B 5,5X22 DIN 7982 VERCHROMT RIGHT REAR FLOOR COVERING TO FRAME FLOOR |
002 | - | ||
| COUNTERSUNK SHEET METAL WASHER RIGHT REAR FLOOR COVERING TO FRAME FLOOR |
002 | A 00 099 017 42 | - | |
| 031 | COVER | 001 | A 13 698 402 52 | - |
| RUBBER BUFFER TO PLUG DRAIN HOLES IN SIDE MEMBERS AND CROSS MEMBERS |
007 | A 00 098 718 40 | - | |
| RUBBER BUFFER TO PLUG DRAIN HOLES IN SIDE MEMBERS AND CROSS MEMBERS |
002 | A 00 098 792 40 | - | |
| RUBBER PLUG (TO PLUG DRAIN HOLES IN SIDE MEMBER SHELLS) |
002 | A 11 198 712 15 | - | |
| LOCK SCREW (TO COVER THREAD IN TUNNEL) |
002 | A 00 099 012 22 | - | |
| 032 | SCREENING PLATE (ABOVE BRAKE LINE AT RIGHT WHEEL ARCH) |
001 | A 40 121 680 00 22 | - |
| LENS HEAD SHEET METAL SCREW (SCREENING PLATE TO RIGHT WHEEL ARCH) B 3,9X9,5 DIN 7981 DBL 8451-21 |
002 | - | ||
| REPLACED BY 40 121 684 00 13 TOGETHER WITH 1 SLIDING PLATE 40 121 683 00 28 3 LENS HEAD COUNTERSUNK SHEET METAL SCREW B 4,2X38 DIN 7 |
- | A 40 121 680 00 17 | - | |
Replaced by: A 40 121 684 00 13 |
- | A 40 121 684 01 13 | - | |
Replaced by: A 40 121 684 00 13 |
- | A 40 121 684 02 13 | - | |
| RUBBER MAT (FOR TUNNEL AND FORKED SUPPORT) Replaced by: A 40 121 684 00 13 |
- | A 40 121 684 03 13 | - | |
| 035 | RUBBER MAT (FOR TUNNEL AND FORKED SUPPORT) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING |
001 | A 40 121 684 00 13 | - |
| SLIDING PLATE | 001 | A 40 121 683 00 28 | - | |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW, CHROMIUM PLATED B 4,2X38 DIN 7983 VERCHROMT |
003 | - | ||
Replaced by: A 40 121 684 03 02 |
- | A 40 121 684 01 02 | - | |
Replaced by: A 40 121 684 03 02 |
- | A 40 121 684 05 02 | - | |
| RUBBER MAT (FOR LEFT FRONT FLOOR) Replaced by: A 40 121 684 03 02 |
- | A 40 121 684 07 02 | - | |
| 036 | RUBBER MAT (FOR LEFT FRONT FLOOR) |
001 | A 40 121 684 03 02 | - |
Replaced by: A 40 121 684 04 02 |
- | A 40 121 684 06 02 | - | |
Replaced by: A 40 121 684 04 02 |
- | A 40 121 684 02 02 | - | |
| RUBBER MAT (FOR RIGHT FRONT FLOOR) Replaced by: A 40 121 684 04 02 |
- | A 40 121 684 08 02 | - | |
| 037 | RUBBER MAT (FOR RIGHT FRONT FLOOR) |
001 | A 40 121 684 04 02 | - |
| 038 | FASTENER RUBBER MATS TO TOE-BOARD |
003 | A 00 098 825 80 | - |
| LENS HEAD COUNTERSUNK SCREW A M 4X45 DIN 7988 RUBBER MATS TO TOE-BOARD |
003 | - | ||
| LOCK WASHER B 4 DIN 127 RUBBER MATS TO TOE-BOARD |
003 | - | ||
| HEX. NUT M 4 DIN 934-5 S RUBBER MATS TO TOE-BOARD |
003 | - | ||
| COVERING (FOR SPARE WHEEL RECESS, LEFT) REWORK UP TO CHASSIS 8500269 Replaced by: A 40 121 680 01 09 |
- | A 40 121 680 00 09 | - | |
| 042 | COVERING (FOR SPARE WHEEL RECESS, LEFT) REWORK UP TO CHASSIS 8500269 |
001 | A 40 121 680 01 09 | - |
| RUBBER MAT (IN LUGGAGE COMPARTMENT, LEFT, GREY) Replaced by: A 120 684 01 05 |
- | A 10 120 684 01 05 | - | |
| 043 | RUBBER MAT (IN LUGGAGE COMPARTMENT, LEFT, GREY) |
001 | A 12 068 401 05 | - |
| RUBBER MAT, GREY (IN LUGGAGE COMPARTMENT, CENTER PART) Replaced by: A 121 684 00 04 |
- | A 40 121 684 00 04 | - | |
| 045 | RUBBER MAT, GREY (IN LUGGAGE COMPARTMENT, CENTER PART) |
001 | A 12 168 400 04 | - |
| FASTENER UP TO CHASSIS 8502144 SHOULD BE BORED MOUNTING HOLES IN FLOOR TO A DIA, OF 7,5-MM RUBBER MATS TO LUGGAGE COMPARTMENT FLOOR Replaced by: A 000 988 17 80 |
- | A 00 098 822 80 | - | |
| 046 | FASTENER UP TO CHASSIS 8502144 SHOULD BE BORED MOUNTING HOLES IN FLOOR TO A DIA, OF 7,5-MM RUBBER MATS TO LUGGAGE COMPARTMENT FLOOR |
006 | A 00 098 817 80 | - |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 4,2X19 DIN 7983 DBL 8451-21 RUBBER MATS TO LUGGAGE COMPARTMENT FLOOR |
006 | - | ||
| CARPET, CENTER Replaced by: A 40 121 680 00 45 |
- | A 40 121 680 03 45 | - | |
| 051 | CARPET, CENTER STATE COLOR AND CHASSIS NUMBER WHEN ORDERING |
001 | A 40 121 680 00 45 | - |
| CARPET, LEFT (FOR REAR FLOOR BELOW FRONT SEAT) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING Replaced by: A 40 121 680 01 41 |
- | A 40 121 680 03 41 | - | |
| 052 | CARPET, LEFT (FOR REAR FLOOR BELOW FRONT SEAT) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING |
001 | A 40 121 680 01 41 | - |
| CARPET, RIGHT (FOR REAR FLOOR BELOW FRONT SEAT) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING Replaced by: A 40 121 680 02 41 |
- | A 40 121 680 04 41 | - | |
| 053 | CARPET, RIGHT (FOR REAR FLOOR BELOW FRONT SEAT) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING |
001 | A 40 121 680 02 41 | - |
| CARPET (FOR TUNNEL IN THE REAR) Replaced by: A 40 121 680 01 45 |
- | A 40 121 680 04 45 | - | |
| 055 | CARPET (FOR TUNNEL IN THE REAR) STATE COLOR WHEN ORDERING |
001 | A 40 121 680 01 45 | - |
| CARPET (FOR REAR FLOOR) Replaced by: A 40 121 680 02 45 |
- | A 40 121 680 05 45 | - | |
| 057 | CARPET (FOR REAR FLOOR) STATE COLOR WHEN ORDERING |
001 | A 40 121 680 02 45 | - |
| 058 | CARPET FOR VERTICAL PLATE IN TAIL |
001 | A 40 121 680 01 44 | - |
| CARPET FOR VERTICAL PLATE IN TAIL |
- | A 40 121 680 00 44 | - | |
| 060 | ENTRANCE RAIL | 002 | A 40 121 686 00 20 | - |
| COUNTERSUNK SHEET METAL SCREW (ENTRANCE RAILS TO FLOOR) B 2,9X9,5 DIN 7982 DBL 8451-21 |
018 | - | ||
| COVER (FOR LEFT ENTRANCE) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING Replaced by: A 40 121 686 01 80 |
- | A 40 121 686 03 80 | - | |
| 061 | COVER (FOR LEFT ENTRANCE) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING |
001 | A 40 121 686 01 80 | - |
| COVER (FOR RIGHT ENTRANCE) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING Replaced by: A 40 121 686 02 80 |
- | A 40 121 686 04 80 | - | |
| 062 | COVER (FOR RIGHT ENTRANCE) STATE COLOR AND CHASSIS NUMBER WHEN ORDERING |
001 | A 40 121 686 02 80 | - |
| 063 | CUP (TO SEAL PEDAL) | 002 | A 10 186 687 00 37 | - |
| LENS HEAD SHEET METAL SCREW (PEDAL SEAL CUP TO FRONT PANEL) B Z 3,5X6,5 DIN 7981 |
006 | - | ||
| PROTECTIVE CABLE (FOR HAND BRAKE CABLE) |
001 | A 40 121 680 00 35 | - | |
| LENS HEAD SHEET METAL SCREW (PROTECTIVE TUBE TO PEDAL FLOOR) B 3,9X9,5 DIN 7981 |
004 | - | ||
| RUBBER BUFFER | 003 | A 00 098 725 40 | - | |
| PLUG | 001 | A 00 098 710 44 | - | |
| 065 | PLUG (AT WHEEL ARCH, RIGHT, REAR) |
002 | A 00 098 701 44 | - |
| PLUG (FOR GLOVE COMPARTMENT) |
001 | A 00 098 700 44 | - | |
| COVERING FOR FRONT PANEL, LATERAL, BOTTOM, LEFT Replaced by: A 40 121 688 03 06 |
- | A 40 121 688 01 06 | - | |
| 066 | COVERING FOR FRONT PANEL, LATERAL, BOTTOM, LEFT |
001 | A 40 121 688 03 06 | - |
| COVERING FOR FRONT PANEL, LATERAL, BOTTOM, LEFT |
001 | A 40 121 688 05 06 | - | |
| COVERING (FOR FRONT PANEL, LATERAL, BOTTOM, RIGHT) Replaced by: A 40 121 688 04 06 |
- | A 40 121 688 02 06 | - | |
| 067 | COVERING (FOR FRONT PANEL, LATERAL, BOTTOM, RIGHT) |
001 | A 40 121 688 04 06 | - |
| 068 | COUNTERSUNK SHEET METAL WASHER COVERING TO COWL, LATERAL |
002 | A 00 098 505 62 | - |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW, CHROMIUM PLATED B 2,9X9,5 DIN 7983 VERCHROMT COVERING TO COWL, LATERAL |
002 | - | ||
| REPLACED BY 121 687 00 98 OR 121 687 01 98 |
- | A 00 098 717 25 | - | |
| 069 | SEAL, 340 MM LONG AT REINFORCEMENT BRACKET STATE LENGTH WHEN ORDERING |
001 | A 12 168 700 98 | - |
| 070 | SEAL, 50-MM LONG (BETWEEN RADIATOR BLOCK) AT REINFORCEMENT BRACKET STATE LENGTH WHEN ORDERING |
001 | A 12 168 701 98 | - |
| 072 | MOUNTING RAIL, FRONT, BOTTOM, LEFT |
001 | A 40 121 688 01 20 | - |
| 073 | MOUNTING RAIL, FRONT, BOTTOM, RIGHT |
001 | A 40 121 688 02 20 | - |
| COUNTERSUNK SHEET METAL SCREW (MOUNTING RAILS TO COWL, LATERAL) B 3,9X9,5 DIN 7982 |
008 | - | ||
| COVERING OVER INSTRUMENTS |
001 | A 40 121 688 00 38 | - | |
| COVERING OVER INSTRUMENTS |
001 | A 40 121 688 01 38 | - | |
| COVER (LEATHER) FOR COVERING OVER INSTRUMENTS AS WELL AS FOR LEFT AND RIGHT CROSS BARS STATE LENGTH AND COLOR WHEN ORDERING |
NB | A 00 098 302 84 | - | |
| COVER (IMITATION LEATHER) FOR COVERING OVER INSTRUMENTS AS WELL AS FOR LEFT AND RIGHT CROSS BARS STATE LENGTH AND COLOR WHEN ORDERING Replaced by: A 000 983 12 86 |
- | A 00 098 303 86 | - | |
| COVER (LEATHER) FOR CROSS BARS STATE LENGTH, WIDTH AND COLOR WHEN ORDERING |
NB | A 00 098 302 84 | - | |
| 078 | HOSE, 145-MM LONG (FOR WATER DRAIN AT BATTERY CASE) STATE LENGTH WHEN ORDERING |
NB | A 00 099 784 82 | - |
| HOSE STRAP, 160 MM LONG 5X0,35 N 263 HOSE TO BATTERY CASE STATE LENGTH WHEN ORDERING |
NB | - | ||
| HOSE CLAMP WSN 5 N 262 HOSE TO BATTERY CASE |
001 | - | ||
Replaced by: A 183 997 01 81 |
- | A 00 099 730 81 | - | |
| GROMMET (FOR WATER DRAIN HOSE AT BATTERY CASE) Replaced by: A 183 997 01 81 |
- | A 18 699 704 81 | - | |
| 079 | GROMMET (FOR WATER DRAIN HOSE AT BATTERY CASE) |
001 | A 18 399 701 81 | - |
| HOSE, 220 MM LONG FOR WATER DRAIN FROM BOOSTER BRAKE MOUNTING RECESS STATE LENGTH WHEN ORDERING |
NB | A 00 099 784 82 | - | |
| GROMMET FOR WATER DRAIN FROM BOOSTER BRAKE MOUNTING RECESS Replaced by: A 183 997 01 81 |
- | A 18 699 704 81 | - | |
| GROMMET FOR WATER DRAIN FROM BOOSTER BRAKE MOUNTING RECESS |
001 | A 18 399 701 81 | - | |
| HOSE STRAP 5X0,35X160 N 263 |
NB | - | ||
| HOSE CLAMP WSN 5 N 262 |
001 | - | ||
| REPLACED BY 40 121 680 09 90 TOGETHER WITH 1 CROSS BAR 40 121 620 03 30 |
- | A 40 121 680 00 90 | - | |
| REPLACED BY 40 121 680 10 90 TOGETHER WITH 1 CROSS BAR 40 121 620 03 30 |
- | A 40 121 680 02 90 | - | |
| 080 | INSTRUMENT PANEL STATE COLOR WHEN ORDERING |
001 | A 40 121 680 09 90 | - |
| INSTRUMENT PANEL STATE COLOR WHEN ORDERING |
001 | A 40 121 680 11 90 | - | |
| REPLACED BY 40 121 680 03 88 TOGETHER WITH 1 CROSS BAR 40 121 620 03 30 |
- | A 40 121 680 00 88 | - | |
| 081 | INSTRUMENT PANEL SHELL | 001 | A 40 121 680 03 88 | - |
| INSTRUMENT PANEL SHELL | 001 | A 40 121 680 02 88 | - | |
| PAD FOR GLOVE COMPARTMENT, BOTTOM STATE LENGTH AND WIDTH WHEN ORDERING |
NB | A 00 098 352 91 | - | |
| REPLACED BY 000 983 02 84 FOR GLOVE COMPARTMENT, BOTTOM Replaced by: A 000 983 02 84 |
- | A 00 098 302 86 | - | |
| COVER (LEATHER) FOR GLOVE COMPARTMENT, BOTTOM Replaced by: A 000 983 02 84 |
- | A 00 098 310 86 | - | |
| COVER (LEATHER) FOR GLOVE COMPARTMENT, BOTTOM STATE LENGTH, WIDTH AND COLOR WHEN ORDERING |
NB | A 00 098 302 84 | - | |
| PAD (MOLTOPREN, 5 MM) FOR INSTRUMENT PANEL, BOTTOM Replaced by: A 000 983 00 98 |
- | A 00 098 352 91 | - | |
| PAD (MOLTOPREN, 5 MM) FOR INSTRUMENT PANEL, BOTTOM STATE LENGTH AND WIDTH WHEN ORDERING |
NB | A 00 098 300 98 | - | |
| COVER (LEATHER) FOR INSTRUMENT PANEL, BOTTOM STATE LENGTH, WIDTH AND COLOR WHEN ORDERING |
NB | A 00 098 302 84 | - | |
| COVER (IMITATION LEATHER) FOR INSTRUMENT PANEL, BOTTOM STATE LENGTH, WIDTH AND COLOR WHEN ORDERING Replaced by: A 000 983 10 86 |
- | A 00 098 302 86 | - | |
| REPLACED BY 40 121 680 18 97 TOGETHER WITH 1 LOCK 10 186 689 00 01 1 CLOCK 000 542 03 11 REWORK TOP OF GLOVE COMPARTMENT FOR LATCH |
- | A 40 121 680 01 97 | - | |
| REPLACED BY 40 121 680 20 97 TOGETHER WITH 1 LOCK 10 186 689 00 01 1 CLOCK 000 542 03 11 REWORK TOP OF GLOVE COMPARTMENT FOR LATCH |
- | A 40 121 680 00 97 | - | |
| REPLACED BY 40 121 680 18 97 TOGETHER WITH 1 CLOCK 000 542 03 11 |
- | A 40 121 680 10 97 | - | |
| REPLACED BY 40 121 680 20 97 TOGETHER WITH 1 CLOCK 000 542 03 11 |
- | A 40 121 680 12 97 | - | |
| 086 | GLOVE COMPARTMENT LID STATE COLOR OF COVER WHEN ORDERING |
001 | A 40 121 680 18 97 | - |
| REPLACED BY 40 121 680 19 97 TOGETHER WITH 1 LOCK 10 186 689 00 01 1 CLOCK 000 542 03 11 REWORK TOP OF GLOVE COMPARTMENT FOR LATCH |
- | A 40 121 680 06 97 | - | |
| REPLACED BY 40 121 680 21 97 TOGETHER WITH 1 LOCK 10 186 689 00 01 1 CLOCK 000 542 03 11 REWORK TOP OF GLOVE COMPARTMENT FOR LATCH |
- | A 40 121 680 07 97 | - | |
| REPLACED BY 40 121 680 19 97 TOGETHER WITH 1 CLOCK 000 542 03 11 |
- | A 40 121 680 11 97 | - | |
| REPLACED BY 40 121 680 21 97 TOGETHER WITH 1 CLOCK 000 542 03 11 |
- | A 40 121 680 13 97 | - | |
| GLOVE COMPARTMENT LID STATE COLOR OF COVER WHEN ORDERING |
001 | A 40 121 680 19 97 | - | |
| REPLACED BY 40 121 680 04 98 TOGETHER WITH 1 LOCK 10 186 689 00 01 1 CLOCK 000 542 03 11 REWORK TOP OF GLOVE COMPARTMENT FOR LATCH |
- | A 40 121 680 00 98 | - | |
| REPLACED BY 40 121 680 04 98 TOGETHER WITH 1 CLOCK 000 542 03 11 |
- | A 40 121 680 02 98 | - | |
| 087 | GLOVE COMPARTMENT LID | 001 | A 40 121 680 04 98 | - |
| REPLACED BY 40 121 680 05 98 TOGETHER WITH 1 LOCK 10 186 689 00 01 1 CLOCK 000 542 03 11 REWORK TOP OF GLOVE COMPARTMENT FOR LATCH |
- | A 40 121 680 01 98 | - | |
| REPLACED BY 40 121 680 05 98 TOGETHER WITH 1 CLOCK 000 542 03 11 |
- | A 40 121 680 03 98 | - | |
| GLOVE COMPARTMENT LID | 001 | A 40 121 680 05 98 | - | |
| 088 | CHECK | 001 | A 40 121 680 01 95 | - |
| CHECK | 001 | A 40 121 680 03 95 | - | |
| ROUND HEAD RIVET (CHECK TO INNER PLATE) 4X8 DIN 660 A1 |
002 | - | ||
| 089 | CLIP NUT | 004 | A 00 099 404 45 | - |
| PAD (1,5-MM FELT CARDBOARD) STATE LENGTH AND WIDTH WHEN ORDERING |
NB | A 00 098 352 91 | - | |
| REINFORCEMENT (CARDBOARD, GREY) 1X20X340-MM |
001 | A 40 121 689 00 65 | - | |
| COVER (LEATHER) STATE LENGTH, WIDTH AND COLOR WHEN ORDERING |
NB | A 00 098 302 84 | - | |
| COVER (IMITATION LEATHER) STATE LENGTH, WIDTH AND COLOR WHEN ORDERING Replaced by: A 000 983 10 86 |
- | A 00 098 302 86 | - | |
| 092 | GARNISH MOULDING (FOR GLOVE COMPARTMENT LID) |
001 | A 40 121 689 00 71 | - |
| 093 | SPREADER CLIP (GARNISH MOULDING TO GLOVE COMPARTMENT LID) |
003 | A 00 098 858 78 | - |
| 094 | HANDLE | 001 | A 31 251 301 41 | - |
| LENS HEAD SCREW, (HANDLE TO GLOVE COMPARTMENT LID) CHROMIUM PLATED A M 3X6 DIN 7985 VERCHROMT |
002 | - | ||
| 095 | HINGE JOINT (FOR GLOVE COMPARTMENT LID) |
001 | A 40 121 689 00 51 | - |
| LENS HEAD SHEET METAL SCREW, CHROMIUM PLATED (HINGE JOINT TO GLOVE COMPARTMENT LID) B 4,2X13 DIN 7981 VERCHROMT |
004 | - | ||
| 096 | LOCK WITH KEY (SAME LOCK AS OF REAR LID) |
001 | A 10 186 689 00 01 | - |
| 097 | KEY (MARKED WITH THE LETTER "K") STATE LETTER AND NUMBER OF LOCK WHEN ORDERING |
001 | A 00 076 610 06 | - |
| LENS HEAD SHEET METAL SCREW, CHROMIUM PLATED B 4,2X13 DIN 7981 VERCHROMT GLOVE COMPARTMENT LID TO INSTRUMENT PANEL |
004 | - | ||
| 098 | PRESSURE SPRING GLOVE COMPARTMENT LID TO INSTRUMENT PANEL |
001 | A 18 699 320 01 | - |
| 099 | GUIDE FORK GLOVE COMPARTMENT LID TO INSTRUMENT PANEL |
002 | A 10 186 689 00 33 | - |
| RUBBER GROMMET GLOVE COMPARTMENT LID TO INSTRUMENT PANEL Replaced by: A 000 997 42 81 |
- | A 00 099 731 81 | - | |
| 100 | RUBBER GROMMET GLOVE COMPARTMENT LID TO INSTRUMENT PANEL |
001 | A 00 099 742 81 | - |
| WASHER 6,4 DIN 125 GLOVE COMPARTMENT LID TO INSTRUMENT PANEL |
001 | - | ||
| RUBBER BUFFER (AT INSTRUMENT PANEL) Replaced by: A 000 987 02 40 |
- | A 00 098 703 40 | - | |
| 101 | RUBBER BUFFER (AT INSTRUMENT PANEL) |
002 | A 00 098 702 40 | - |
| PLUG AT GLOVE COMPARTMENT, LEFT |
001 | A 00 098 702 44 | - | |
| PLUG AT GLOVE COMPARTMENT, LEFT |
001 | A 00 098 700 44 | - | |
| PLUG (TO PLUG MOUNTING HOLES FOR HANDLE, WHICH WILL BE MOUNTED UPON SPECIAL REQUEST) |
002 | A 00 098 700 44 | - | |
| 110 | GARNISH MOULDING FOR INSTRUMENT PANEL, LEFT |
001 | A 40 121 689 01 71 | - |
| GARNISH MOULDING FOR INSTRUMENT PANEL, LEFT Replaced by: A 40 121 689 02 71 |
- | A 40 121 689 03 71 | - | |
| GARNISH MOULDING FOR INSTRUMENT PANEL, LEFT |
001 | A 40 121 689 02 71 | - | |
| 111 | GARNISH MOULDING FOR INSTRUMENT PANEL, RIGHT |
001 | A 40 121 689 02 71 | - |
| GARNISH MOULDING FOR INSTRUMENT PANEL, RIGHT Replaced by: A 40 121 689 01 71 |
- | A 40 121 689 04 71 | - | |
| GARNISH MOULDING FOR INSTRUMENT PANEL, RIGHT |
001 | A 40 121 689 01 71 | - | |
Replaced by: A 000 990 17 33 |
- | A 00 098 858 78 | - | |
| SQUARE HEAD SCREW GARNISH MOULDING TO INSTRUMENT PANEL Replaced by: A 000 990 17 33 |
- | A 00 099 018 33 | - | |
| 113 | SQUARE HEAD SCREW GARNISH MOULDING TO INSTRUMENT PANEL |
009 | A 00 099 017 33 | - |
| WASHER 3,2 DIN 125 DBL 8451-11 GARNISH MOULDING TO INSTRUMENT PANEL |
009 | - | ||
| LOCK WASHER B 3 DIN 127 DBL 8451-11 GARNISH MOULDING TO INSTRUMENT PANEL |
009 | - | ||
| HEX, NUT M 3 DIN 934-5 S DBL 8451-21 GARNISH MOULDING TO INSTRUMENT PANEL |
009 | - | ||
| 114 | COVER (AT INSTRUMENT PANEL, CENTER) |
001 | A 40 121 689 00 39 | - |
| 115 | TYPE DESIGNATION, INSIDE (AT INSTRUMENT PANEL) |
001 | A 40 121 817 00 14 | - |
| 116 | CLIP (COVER AND TYPE DESIGNATION TO INSTRUMENT PANEL) |
002 | A 00 099 400 45 | - |
| COUNTERSUNK SHEET METAL SCREW B 4,2X13 DIN 7982 INSTRUMENT PANEL TO CROSS BARS |
010 | - | ||
| HEX. HEAD SCREW M 6X20 DIN 933-8 G INSTRUMENT PANEL TO CROSS BARS |
003 | - | ||
| WASHER 6,4 DIN 125 INSTRUMENT PANEL TO CROSS BARS |
003 | - | ||
| LOCK WASHER B 6 DIN 127 INSTRUMENT PANEL TO CROSS BARS |
003 | - | ||
| LENS HEAD SHEET METAL SCREW, CHROMIUM PLATED B 4,2X13 DIN 7981 VERCHROMT INSTRUMENT PANEL TO CROSS BARS |
002 | - | ||
| WELT (LEATHER) STATE COLOR WHEN ORDERING |
001 | A 40 121 680 00 49 | - | |
| HEX. HEAD SCREW M 6X20 DIN 933-8 G INSTRUMENT PANEL TO FRONT PANEL PILLARS |
002 | - | ||
| WASHER 6,4 DIN 125 INSTRUMENT PANEL TO FRONT PANEL PILLARS |
002 | - | ||
| LOCK WASHER B 6 DIN 127 INSTRUMENT PANEL TO FRONT PANEL PILLARS |
002 | - | ||
| FELT STRIP, GREY, 18X1-MM, 80-MM LONG INSTRUMENT PANEL TO PARTITION PLATE |
- | A 00 098 311 10 | - | |
| LENS HEAD SCREW A M 4X10 DIN 7985 INSTRUMENT PANEL TO PARTITION PLATE |
001 | - | ||
| WASHER 4,3 DIN 125 INSTRUMENT PANEL TO PARTITION PLATE |
001 | - | ||
| LOCK WASHER B 4 DIN 127 INSTRUMENT PANEL TO PARTITION PLATE |
001 | - | ||
| HEX, NUT M 4 DIN 934-5 S INSTRUMENT PANEL TO PARTITION PLATE |
001 | - | ||
| 118 | GARNISH MOULDING, LEFT AT CROSS BARS |
001 | A 40 121 689 01 72 | - |
| 119 | GARNISH MOULDING, RIGHT AT CROSS BARS |
001 | A 40 121 689 02 72 | - |
| 120 | SQUARE HEAD SCREW GARNISH MOULDINGS TO CROSS BARS |
010 | A 00 099 017 33 | - |
| WASHER 3,2 DIN 125 GARNISH MOULDINGS TO CROSS BARS |
010 | - | ||
| LOCK WASHER B 3 DIN 127 GARNISH MOULDINGS TO CROSS BARS |
010 | - | ||
| HEX. NUT M 3 DIN 934-5 S GARNISH MOULDINGS TO CROSS BARS |
010 | - | ||
| LEDGE (FOR CROSS BARS) | - | A 40 121 689 00 67 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy