ELECTRICAL EQUIPMENT AT ENGINE

EPC / Mercedes / 1 / FG / FG 121.002 / 15 / 008
‹ ›

№- Name A* Part number A

STARTER MOTOR 		- XXX XXX XXX XXXX -
001 STARTER MOTOR
WITH PUSH BUTTON OPERATION 		- A 00 015 177 01  -
STARTER MOTOR
WITH PUSH BUTTON OPERATION 		- A 00 015 183 01  -
002 ROLLER FREEWHEEL 001 A 00 015 120 13  -
003 SOLENOID SWITCH STARTER 001 A 00 015 210 11  -
004 SET OF CARBON BRUSHES
4 PIECES 		001 A 00 015 114 14  -
005 PRESSURE SPRING
FOR CARBON BRUSH 		004 A 00 015 105 93  -
006 BEARING BUSHING
IN DRIVE BEARING 		001 A 00 015 107 50  -
007 BEARING BUSHING
IN COMMUTATOR BEARING 		001 A 00 015 108 50  -
008 INTERMEDIATE FLANGE
FOR STARTER MOTOR AT CLUTCH HOUSING 		001 A 12 015 100 12  -
HEX. -HD. SCREW
M 12X80 DIN 931 -8 G FOR STARTER MOTOR AT CLUTCH HOUSING 		002 -
WASHER
13 DIN 433 FOR STARTER MOTOR AT CLUTCH HOUSING 		002 -
LOCK WASHER
B 12 DIN 127 FOR STARTER MOTOR AT CLUTCH HOUSING 		002 -
HEX. NUT
M 12 DIN 934-5 S FOR STARTER MOTOR AT CLUTCH HOUSING 		002 -

GENERATOR-IN CASE OF INSTALLATION OF A 300 WATT GENERATOR AND PARTS WITH INTERFERENCE SUPPRESSION SEE GROUP 54 (RADIO CO 		- XXX XXX XXX XXXX -
013 GENERATOR 160 WATT 001 A 00 015 448 02  -
014 SET OF CARBON BRUSHES
2 PIECES 		001 A 00 015 427 14  -
015 PRESSURE SPRING
FOR CARBON BRUSH 		002 A 00 015 406 93  -
016 THREE-ELEMENT VOLTAGE
REGULATOR SEE ALSO GROUP 54 		001 A 00 015 455 06  -
017 PULLEY
FOR GENERATOR OPTIONAL 		001 A 18 015 507 15  -
PULLEY
FOR GENERATOR OPTIONAL 		001 A 18 015 508 15  -
WOODRUFF KEY
3X5 DIN 6888 FOR PULLEY AT GENERATOR HAS TO BE DELIVERED WITH GENERATOR 		001 -
LOCK WASHER
B 12 DIN 127 FOR PULLEY AT GENERATOR HAS TO BE DELIVERED WITH GENERATOR 		001 -
HEX. NUT
M 12X1,5 DIN 936-5 S FOR PULLEY AT GENERATOR HAS TO BE DELIVERED WITH GENERATOR 		001 -
021 SUPPORT
FOR GENERATOR 		- A 12 115 508 35  -
SUPPORT
FOR GENERATOR 		- A 12 115 503 35  -
LOCK WASHER
B 10 DIN 127 FOR SUPPORT AT CYLINDER CRANKCASE 		002 -
HEX. NUT
M 10 DIN 934-5 S FOR SUPPORT AT CYLINDER CRANKCASE 		002 -
024 GROUND CABLE
FOR SUPPORT AT GENERATOR 		001 A 12 115 003 32  -
HEX. -HD. SCREW
M 8X35 DIN 931-8 G FOR GENERATOR AT SUPPORT 		- -
HEX. -HD. SCREW
M 8X40 DIN 931-8 G FOR GENERATOR AT SUPPORT 		- -
026 INTERMEDIATE WASHER
FOR GENERATOR AT SUPPORT, REAR 		- A 12 115 500 76  -
SLEEVE
FOR GENERATOR AT SUPPORT, FRONT 		- A 12 199 104 40  -
RUBBER WASHER
FOR GENERATOR AT SUPPORT, FRONT 		- A 12 115 500 81  -
DISC
FOR GENERATOR AT SUPPORT, FRONT 		- A 12 115 500 82  -
INTERMEDIATE WASHER
FOR GENERATOR AT SUPPORT, REAR 		- A 12 115 501 76  -
LOCK WASHER
B 8 DIN 127 FOR GENERATOR AT SUPPORT 		001 -
HEX. NUT
M 8 DIN 934-5 S FOR GENERATOR AT SUPPORT 		001 -
HEX. -HD. SCREW
M 8X60 DIN 931-8 G FOR GENERATOR AT ENGINE SUPPORT, RIGHT 		- -
032 SLEEVE
FOR GENERATOR AT ENGINE SUPPORT, RIGHT 		- A 18 099 106 40  -
033 RUBBER WASHER
FOR GENERATOR AT ENGINE SUPPORT, RIGHT 		- A 12 015 500 81  -
034 DISC
FOR GENERATOR SUSPENSION, RUBBER MOUNTED FOR GENERATOR AT ENGINE SUPPORT, RIGHT 		- A 12 015 500 82  -
035 WASHER
FOR GENERATOR AT ENGINE SUPPORT, RIGHT 		- A 12 199 001 40  -
036 SPACER SLEEVE
25.5-MM LONG FOR GENERATOR AT ENGINE SUPPORT, RIGHT 		- A 12 115 500 53  -
LOCK WASHER
B 8 DIN 127 FOR GENERATOR AT ENGINE SUPPORT, RIGHT 		001 -
HEX. NUT
M 8 DIN 934-5 S FOR GENERATOR AT ENGINE SUPPORT, RIGHT 		001 -
039 TIGHTENING SCREW
FOR GENERATOR ADJUSTMENT 		- A 12 115 501 23  -
040 TIGHTENING NUT
FOR GENERATOR ADJUSTMENT 		001 A 12 115 500 72  -
041 CLAMPING PIECE
FOR GENERATOR ADJUSTMENT 		001 A 12 115 501 28  -
HEX. NUT
M 8 DIN 934-5 S FOR GENERATOR ADJUSTMENT 		001 -
043 INTERMEDIATE WASHER
FOR TIGHTENING SCREW WITH CLAMPING PIECE AT CYLINDER CRANKCASE 		- A 12 115 500 76  -
LOCK WASHER
B 8 DIN 127 FOR TIGHTENING SCREW WITH CLAMPING PIECE AT CYLINDER CRANKCASE 		- -
HEX. NUT
M 8 DIN 934-5 S FOR TIGHTENING SCREW WITH CLAMPING PIECE AT CYLINDER CRANKCASE 		- -
HEX. -HD. SCREW
M 8X30 DIN 931-8 G FOR CLAMPING PIECE AT GENERATOR 		001 -
LOCK WASHER
B 8 DIN 127 FOR CLAMPING PIECE AT GENERATOR 		001 -
TIGHTENING SCREW
FOR GENERATOR ADJUSTMENT 		- A 12 115 502 23  -
HEX. -HD. SCREW
M 8X60 DIN 931-8 G FOR TIGHTENING SCREW WITH CLAMPING PIECE AT WATER PUMP 		- -
SPACER RING
FOR TIGHTENING SCREW WITH CLAMPING PIECE AT WATER PUMP 		- A 12 115 500 51  -
INTERMEDIATE WASHER
FOR TIGHTENING SCREW WITH CLAMPING PIECE AT WATER PUMP 		- A 12 115 501 76  -

IGNITION DISTRIBUTOR 		- XXX XXX XXX XXXX -
055 IGNITION DISTRIBUTOR
WITH COUPLING AND VACUUM CONTROL WITH INTERFERENCE SUPPRESSION 		001 A 00 015 873 01  -
IGNITION DISTRIBUTOR
WITH COUPLING AND VACUUM CONTROL EXPORT, SPECIAL REQUEST WITH INTERFERENCE SUPPRESSION AND DUST PROTECTION 		001 A 00 015 877 01  -
IGNITION DISTRIBUTOR
WITH COUPLING AND VACUUM CONTROL WITH INTERFERENCE SUPPRESSION SPECIAL REQUEST, FOR REGIONS WITH BAD FUEL (COMPRESSION 7 		001 A 00 015 876 01  -
056 DISTRIBUTOR PLATE
WITH CARBON BRUSH 		001 A 00 015 806 02  -
057 CARBON BRUSH WITH SPRING 001 A 00 015 800 34  -
058 OILER IN HOUSING 001 A 00 015 804 89  -
059 CONTACT SET 001 A 00 015 807 90  -
061 DISTRIBUTOR ROTOR
WITH COUNTER WEIGHT WITH INTERFERENCE SUPPRESSION AND DUST PROTECTION 		001 A 00 015 815 31  -
DUST PROTECTIVE COVER
EXPORT, SPECIAL REQUEST 		001 A 00 015 800 11  -
062 LEAF SPRING
FOR DISTRIBUTOR PLATE 		002 A 00 015 803 33  -
063 FIXING SHACKLE
WITHOUT NOSE 		001 A 00 015 803 40  -
064 FIXING SHACKLE WITH NOSE 001 A 00 015 804 40  -
CYLINDER SCREW
AM 4X8 DIN 84-4 S FOR FIXING SHACKLE WITH LEAF SPRING AT IGNITION DISTRIBUTOR 		002 -
LOCK WASHER
B 4 DIN 127 FOR FIXING SHACKLE WITH LEAF SPRING AT IGNITION DISTRIBUTOR 		002 -
067 CONDENSER AT HOUSING 001 A 00 015 649 01  -
068 FIXING CLAMP
FOR CONDENSER 		001 A 00 015 806 40  -
CYLINDER SCREW
AM 4X5 DIN 84-5 S FOR CONDENSER AT IGNITION DISTRIBUTOR 		002 -
LOCK WASHER
B 4 DIN 127 FOR CONDENSER AT IGNITION DISTRIBUTOR 		002 -
070 VACUUM CONTROL 001 A 00 015 805 18  -
CYLINDER SCREW
AM 4X5 DIN 84-5 S FOR VACUUM CONTROL AT IGNITION DISTRIBUTOR 		002 -
LOCK WASHER
B 4 DIN 127 FOR VACUUM CONTROL AT IGNITION DISTRIBUTOR 		002 -
073 COUPLING
ON SHAFT 		001 A 00 015 805 09  -
074 FIBER WASHER
FOR COUPLING AT IGNITION DISTRIBUTOR 		002 A 00 015 801 76  -
075 SHIM 0.1 MM THICK
FOR COUPLING AT IGNITION DISTRIBUTOR OPTIONAL 		NB A 00 015 800 52  -
SHIM 0.2 MM THICK
FOR COUPLING AT IGNITION DISTRIBUTOR OPTIONAL 		NB A 00 015 804 52  -
076 PIN
FOR COUPLING AT IGNITION DISTRIBUTOR 		001 A 00 015 807 74  -
76a SNAP RING
FOR COUPLING AT IGNITION DISTRIBUTOR 		001 A 00 015 802 77  -
077 THREADED BUSHING 001 A 00 015 800 59  -
078 SEALING RING 001 A 00 015 802 60  -
080 BEARING, IGNITION 001 A 12 115 002 07  -
081 ADJUSTING LEVER 001 A 18 015 003 24  -
HEX. -HD. SOCKET SCREW
M 6X25 DIN 912-8 G 		001 -
083 ADJUSTING ECCENTRIC 001 A 18 015 002 24  -
SPRING WASHER
B 6 DIN 137 FOR ADJUSTING LEVER AT ADJUSTING ECCENTRIC 		001 -
HEX. -HD. SCREW
M 6X18 DIN 933-8 G FOR ADJUSTING LEVER AT ADJUSTING ECCENTRIC 		001 -
097 BEARING WITH BUSHING
FOR IGNITION DISTRIBUTOR AND OIL PUMP DRIVE 		001 A 18 015 001 07  -
098 HELICAL GEAR
FOR IGNITION DISTRIBUTOR DRIVE 		001 A 18 015 804 12  -
100 INTERMEDIATE RING
FOR BEARING, IGNITION DISTRIBUTOR, AT CYLINDER CRANKCASE 		001 A 12 115 800 51  -
HEX. -HD. SOCKET SCREW
M 8X45 DIN 912-8 G FOR BEARING, IGNITION DISTRIBUTOR, AT CYLINDER CRANKCASE 		001 -
WASHER
8,4 DIN 125 FOR BEARING, IGNITION DISTRIBUTOR, AT CYLINDER CRANKCASE 		001 -
104 VACUUM PIPE 001 A 12 115 003 35  -
CONNECTING SCREW
4 DIN 3871 		001 -
DOUBLE CONE RING
4 DIN 3862 		001 -
107 RUBBER HOSE 001 A 18 199 703 82  -
108 HOSE STRAP 002 A 18 199 700 90  -
109 SPRING CLAMP
FOR FUEL PIPE AND VACUUM PIPE 		002 A 18 099 305 25  -
SEALING RING
A 6X12 DIN 7603 A1 FOR VACUUM CONNECTION AT CARBURETOR 		001 -
110 CONNECTING FITTING
FOR VACUUM CONNECTION AT CARBURETOR 		001 A 18 115 801 37  -
112 GROUND CABLE
FROM IGNITION DISTRIBUTOR TO CYLINDER HEAD 		001 A 12 115 002 32  -

IGNITION CABLE 		- XXX XXX XXX XXXX -
115 IGNITION CABLE
HARNESS WITH PROTECTIVE TUBE 		001 A 12 115 003 19  -
116 IGNITION CABLE
PLUG, WITH INTERFERENCE SUPPRESSION OPTIONAL 		004 A 00 015 615 10  -
IGNITION CABLE
PLUG, WITH INTERFERENCE SUPPRESSION OPTIONAL 		004 A 00 015 620 10  -
117 CABLE SLEEVE 004 A 00 015 900 38  -
PLUG FOR
INTERFERENCE SUPPRESSION OPTIONAL FOR IGNITION DISTRIBUTOR FOR RADIO INSTALLATION 		004 A 00 015 617 10  -
PLUG FOR
INTERFERENCE SUPPRESSION OPTIONAL FOR IGNITION DISTRIBUTOR FOR RADIO INSTALLATION 		004 A 00 015 621 10  -
118 RAIN PROTECTIVE CAP
FOR IGNITION DISTRIBUTOR 		004 A 00 015 900 85  -
RUBBER CAP
FOR IGNITION DISTRIBUTOR FOR RADIO INSTALLATION 		004 A 00 015 907 85  -
119 GROMMET
FOR PROTECTIVE TUBE 		004 A 00 099 722 81  -
120 IGNITION CABLE
FOR IGNITION COIL, DISTRIBUTOR 		001 A 18 015 006 18  -
CABLE SLEEVE 002 A 00 015 900 38  -
PLUG FOR
INTERFERENCE SUPPRESSION OPTIONAL FOR IGNITION DISTRIBUTOR SPECIAL REQUEST FOR RADIO INSTALLATION 		001 A 00 015 617 10  -
PLUG FOR
INTERFERENCE SUPPRESSION OPTIONAL FOR IGNITION DISTRIBUTOR SPECIAL REQUEST FOR RADIO INSTALLATION 		001 A 00 015 621 10  -
RAIN PROTECTIVE CAP
FOR IGNITION CABLE 		002 A 00 015 900 85  -
RUBBER CAP
SPECIAL REQUEST FOR RADIO INSTALLATION 		001 A 00 015 907 85  -
121 GROMMET 002 A 15 954 600 37  -
122 CABLE TERMINAL
4X0,8 N 261 		001 -
123 CABLE TERMINAL
5X0,8 N 261 		001 -
LOCK WASHER
B 6 DIN 127 FOR PROTECTIVE TUBE AT CYLINDER HEAD 		002 -
HEX. -HD. SCREW
M 6X10 DIN 933-8 G FOR PROTECTIVE TUBE AT CYLINDER HEAD 		002 -

SPARK PLUG 		- XXX XXX XXX XXXX -
126 SPARK PLUG
MAKE BOSCH OPTIONAL 		004 A 00 015 952 03  -
SPARK PLUG
MAKE BERU OPTIONAL 		004 A 00 015 947 03  -
SPARK PLUG
WITH INTERFERENCE SUPPRESSION MAKE BOSCH OPTIONAL SPECIAL REQUEST FOR INSTALLATION OF RADIO AND 300 W GERERATOR WITH INT 		004 A 00 015 958 03  -
SPARK PLUG
WITH INTERFERENCE SUPPRESSION MAKE BERU OPTIONAL SPECIAL REQUEST FOR INSTALLATION OF RADIO AND 300 W GERERATOR WITH INTE 		004 A 00 015 951 03  -
SEALING RING
C 14X20 DIN 7603 FOR SPARK PLUG AT CYLINDER HEAD HAS TO BE DELIVERED WITH SPARK PLUG 		004 -

IGNITION COIL 		- XXX XXX XXX XXXX -
128 IGNITION COIL
AT FRONT WALL SEE GROUP 54 		001 A 00 015 800 03  -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA