ELECTRICAL EQUIPMENT AND INSTRUMENTS

EPC / Mercedes / 1 / FG / FG 121.000 / 54 / 033
‹ ›

№- Name A* Part number A

BATTERY, STARTER CABLE 		- XXX XXX XXX XXXX -
001 LEAD BATTERY 12 V 001 A 00 054 146 01  -
LEAD BATTERY 12 V 56 AH
EXPORT - SPECIAL REQUEST (TROPICAL DESIGN) 		001 A 00 054 112 01  -
COLD START
BATTERY 12 V 56 AH SPECIAL REQUEST - FOR REGIONS WITH COLD TEMPERATURES 		001 A 00 054 158 01  -
002 FIXING FRAME 001 A 12 154 001 23  -
003 TIGHTENING SCREW
FOR FIXING OF BATTERY 		002 A 12 054 101 24  -
LOCK WASHER
B 6 DIN 127 FOR FIXING OF BATTERY 		002 -
HEX. NUT
M 6 DIN 934-5 S FOR FIXING OF BATTERY 		002 -
RUBBER HOSE 20 MM LONG
ABOVE ANGLE OF SUPPORTING RAIL ORDER BY THE METER 		002 A 00 098 705 32  -
004 RUBBER PLUG
FOR BLIND HOLE IN FRONT WALL 		004 A 00 098 703 15  -
004 RUBBER PLUG
FOR BLIND HOLE IN FRONT WALL 		005 A 00 098 703 15  -
STARTER CABLE
FROM POS.POLE TO STARTER MOTOR
Replaced by: A  128 540 00 30 		- A 18 054 000 30  -
006 STARTER CABLE
FROM POS.POLE TO STARTER MOTOR 		001 A 12 854 000 30  -
STARTER CABLE
FROM POS.POLE TO STARTER MOTOR 		001 A 12 154 001 30  -
007 RUBBER PROTECTIVE CAP
FOR STARTER CABLE 		001 A 13 654 600 35  -
008 GROUND CABLE
FROM NEG.POLE OF BATTERY TO CLUTCH HOUSING 		001 A 18 054 000 31  -
GROUND CABLE
FROM NEG.POLE OF BATTERY TO CLUTCH HOUSING 		001 A 18 054 004 31  -
009 GROMMET
FOR STARTER CABLE THROUGH PARTITION 		001 A 18 699 707 81  -
GROMMET
FOR STARTER CABLE THROUGH PARTITION 		001 A 18 699 704 81  -
010 FIXING CLAMP
FOR STARTER CABLE AT FRONT WALL OR MOUNTING CONTROL SHAFT RESP. 		001 A 18 799 500 37  -
FIXING CLAMP
FOR STARTER CABLE AT FRONT WALL OR MOUNTING CONTROL SHAFT RESP. 		001 A 18 199 500 20  -
LENS-HD.SHEET METAL SCREW
BZ 4,8X9,5 DIN 7981 FOR FIXING CLAMP 		001 -
LENS-HD. SCREW
AM 5X10 DIN 7985-4S FOR FIXING CLAMP 		001 -
LOCK WASHER
B 5 DIN 127 FOR FIXING CLAMP 		001 -
011 GROMMET
FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL 		001 A 00 099 734 81  -

CABLES 		- XXX XXX XXX XXXX -
MAIN CABLE HARNESS
UP TO CHASSIS 7506729 		001 A 12 154 001 05  -
REPLACED BY
121 540 07 05 TOGETHER WITH 1 FUSE BOX 180 540 09 50 FROM CHASSIS 7506730-7520625 		- A 12 154 005 05  -
015 MAIN CABLE HARNESS
FROM CHASSIS 7520626 		001 A 12 154 007 05  -
MAIN CABLE HARNESS
UP TO CHASSIS 7505869 		001 A 12 154 002 05  -
REPLACED BY
121 540 08 50 TOGETHER WITH 1 FUSE BOX 180 540 09 50 FROM CHASSIS 7505870-7518698 		- A 12 154 006 05  -
MAIN CABLE HARNESS
FROM CHASSIS 7518699 		001 A 12 154 008 05  -
016 HOUSING, LOWER
PART, WITH SOCKET 		001 A 00 054 506 28  -
017 GASKET 001 A 00 054 500 80  -
CABLE HARNESS
FOR TAIL LIGHTS UP TO CHASSIS 7514212 		001 A 12 154 001 07  -
CABLE HARNESS
FOR TAIL LIGHTS UP TO CHASSIS 7514212 		001 A 12 154 002 07  -
019 CABLE HARNESS
FOR TAIL LIGHTS FROM CHASSIS 7514213 		001 A 12 154 008 07  -
020 CABLE HARNESS
FROM GENERATOR TO REGULATOR 		001 A 18 054 000 08  -
021 RUBBER PROTECTIVE CAP
FOR TERMINAL AT GENERATOR D POS. AND DF 		002 A 00 054 602 35  -
INSULATING HOSE
B 16X18 SW 200 MM LG. DIN 40621 OVER MAIN CABLE HARNESS, ROTARY SWITCH ORDER BY THE METER 		001 -
023 CABLE HARNESS
FROM 2-POLE CABLE CONNECTOR TO REVERSE DRIVE LIGHT 		001 A 12 054 017 38  -
024 BRACKET
FOR CABLE HARNESS AT REVERSE DRIVE LIGHT SWITCH 		001 A 18 054 600 43  -
025 GROMMET
FOR CABLE HARNESS AT BRACKET 		001 A 00 099 731 81  -
FIXING CLAMP
FOR CABLE TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT 		002 A 18 199 500 20  -
LENS-HD. SHEET
METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT 		001 -
GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL
Replaced by: A  186 540 03 41 		- A 13 654 004 41  -
026 GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL 		001 A 18 654 003 41  -
GROUND CABLE
FROM STARTER FLANGE TO FRONT WALL 		001 A 12 054 000 41  -
027 SCREW WITH LOCKING PLATE
FOR GROUND CABLE AT PEDAL FLOOR 		001 A 12 042 002 27  -
LOCK WASHER
B 6 DIN 127 FOR GROUND CABLE AT PEDAL FLOOR 		001 -
HEX. NUT
M 6 DIN 934-5 S FOR GROUND CABLE AT PEDAL FLOOR 		001 -
031 CABLE CONNECTOR, 5-POLE
FOR STEERING SPINDLE CABLE HARNESS 		002 A 00 054 619 41  -
032 CABLE CONNECTOR, 5-POLE
FOR STEERING SPINDLE CABLE HARNESS 		001 A 00 054 606 41  -
033 CABLE CONNECTOR, 2-POLE
FOR HEATING BLOWER CONNECTION 		002 A 00 054 618 41  -
LENS-HD. SHEET
METAL SCREW B 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR, 5-POLE, AT FRONT WALL 		004 -
LENS-HD. SHEET
METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5-POLE, AT WHEEL ARCH PAN, STEERING SPINDLE CABLE HARNESS 		002 -
LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR, 2-POLE, AT WHEEL ARCH PAN, LEFT AND RIGHT, HEATER BLOWER 		004 -
037 GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		001 A 18 199 700 81  -
038 GROMMET
FOR MAIN CABLE HARNESS THROUGH FRONT WALL 		001 A 00 099 727 81  -
38a GROMMET
FOR BLINKER LIGHT AT WHEEL ARCH 		002 A 00 099 722 81  -
GROMMET
FOR FOOT DIMMER SWITCH 		001 A 00 099 730 81  -
039 FIXING CLAMP 005 A 00 098 833 78  -
039 FIXING CLAMP 001 A 00 098 833 78  -
040 FIXING CLAMP 001 A 00 098 834 78  -
040 FIXING CLAMP 005 A 00 098 834 78  -
GROUND CABLE
FOR PARKING LIGHT WITH ASYMMETR. DIMMER LIGHT FROM CHASSIS 7517272 		002 A 18 054 030 38  -
GROUND CABLE
FOR PARKING LIGHT WITH ASYMMETR. DIMMER LIGHT UP TO CHASSIS 7520625 		- A 18 054 030 38  -
GROUND CABLE
FOR PARKING LIGHT WITH ASYMMETR. DIMMER LIGHT UP TO CHASSIS 7518698 		- A 18 054 030 38  -
GROMMET
FOR FUEL TRANSMITTER CABLE
Replaced by: A  000 997 18 81 		- A 00 099 717 81  -
042 GROMMET
FOR FUEL TRANSMITTER CABLE 		001 A 00 099 718 81  -
GROMMET
FOR LUGGAGE COMPARTMENT LID, INTERIOR PLATE UP TO CHASSIS 7514212 		001 A 00 099 722 81  -
GROMMET
FOR REAR SEAT SUPPORT AND TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504119 		002 A 00 099 730 81  -
INSULATING HOSE
B 12X13, 6X40 MM LG. SW DIN 40621 FOR MAIN CABLE HARNESS AT WHEEL ARCH PAN ORDER BY THE METER 		002 -
FIXING CLAMP
FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE 		008 A 00 098 833 78  -
FIXING CLAMP
FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE 		005 A 00 098 834 78  -
FIXING CLAMP
FOR TRANSMITTER CABLE UP TO CHASSIS 7514212 		001 A 18 699 502 20  -
LOCK WASHER
B 5 DIN 127 FOR FIXING CLAMP, TRANSMITTER CABLE UP TO CHASSIS 7514212 		001 -
LENS-HD. SCREW
AM 5X10 DIN 7985-4S FOR FIXING CLAMP, TRANSMITTER CABLE UP TO CHASSIS 7514212 		001 -
LENS-HD. SHEET
METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER, AT REAR CROSS MEMBER FROM CHASSIS 7514213 		001 -
FIXING CLAMP
1X8 DIN 72571 UP TO CHASSIS 7514212 		001 -
LENS-HD. SCREW
AM 4X10 DIN 7985-4S UP TO CHASSIS 7514212 		001 -
LOCK WASHER
B 4 DIN 127 UP TO CHASSIS 7514212 		001 -
HEX. NUT
M 4 DIN 934-5 S UP TO CHASSIS 7514212 		001 -
056 LINK
FOR TAIL LIGHT CABLE HARNESS, LEFT AND RIGHT 		008 A 12 054 601 82  -
LOCK WASHER
B 4 DIN 127 FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT, FOR TAIL LIGHT 		002 -
LENS-HD. SCREW
AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT, FOR TAIL LIGHT 		002 -
HEX. NUT
M 4 DIN 934-5 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT, FOR TAIL LIGHT 		002 -
TEROSTAT CABLE,
6-MM DIA., 50-MM LONG FOR TAIL LIGHT CABLE HARNESS THROUGH WHEEL ARCH, REAR ORDER BY THE METER 		002 A 00 098 946 85  -
CLIP
FOR CABLE OF IDENTIFICATION LIGHT AT LUGGAGE COMPARTMENT LID UP TO CHASSIS 7514212 		003 A 00 098 817 78  -
FIXING CLAMP
FOR CABLE OF IDENTIFICATION LIGHT AT LUGGAGE COMPARTMENT LID UP TO CHASSIS 7514212 		002 A 18 699 502 20  -
061 CABLE COVER PLATE
FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		001 A 12 054 600 81  -
LENS-HD. SHEET
METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER 		002 -
063 FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 13 699 500 37  -
LENS-HD.SCREW
AM 4X10 DIN 7985-4S FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LENS-HD. SCREW
AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL 		001 -
066 CAGE CLIP WITH NUT
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 00 099 022 91  -

Replaced by: A  000 997 47 82 		- A 12 099 708 82  -
HOSE PIECE, 20 MM LONG
ABOVE STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS
Replaced by: A  000 997 47 82 		- A 18 099 715 82  -
067 HOSE PIECE, 20 MM LONG
ABOVE STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS ORDER BY THE METER 		004 A 00 099 747 82  -
068 FIXING CLAMP
FOR MAIN CABLE HARNESS AT FRONT WALL 		001 A 13 699 501 35  -
069 FIXING CLAMP
FOR STEERING SPINDLE CABLE HARNESS AT FORKED SUPPORT 		001 A 18 199 500 20  -
LENS-HD. SHEET
METAL SCREW B 4,2X9,5 DIN 7981 FOR STEERING SPINDLE CABLE HARNESS AT FORKED SUPPORT 		001 -
FIXING CLAMP
FOR CABLE STOP SWITCH AT BRAKE PIPE 		002 A 00 198 809 78  -
FUSE BOX
WITH FUSE AND BRASS SCREW UP TO CHASSIS 7520625 		001 A 18 054 003 50  -
FUSE BOX
WITH FUSE AND BRASS SCREW UP TO CHASSIS 7518698 		- A 18 054 003 50  -
071 FUSE BOX
WITH FUSE AND BRASS SCREW FROM CHASSIS 7520626 		001 A 18 054 009 50  -
071 FUSE BOX
WITH FUSE AND BRASS SCREW FROM CHASSIS 7518699 		- A 18 054 009 50  -
072 COVER
FOR FUSE BOX 		001 A 00 054 502 03  -
073 FUSE, 12 AMPERES
8 DIN 72581 UP TO CHASSIS 7520625 		012 -
073 FUSE, 12 AMPERES
8 DIN 72581 UP TO CHASSIS 7518698 		- -
073 FUSE, 12 AMPERES
8 DIN 72581 FROM CHASSIS 7520626 		011 -
073 FUSE, 12 AMPERES
8 DIN 72581 FROM CHASSIS 7518699 		- -
73a FUSE, 35 AMPERES
25 DIN 72581 FROM CHASSIS 7520626 		001 -
73a FUSE, 35 AMPERES
25 DIN 72581 FROM CHASSIS 7518699 		- -
LENS-HD. SHEET
METAL SCREW BZ 4,2X19 DIN 7981 FOR FUSE BOX AT PARTITION 		002 -
FIXING CLAMP
FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 A 18 199 500 20  -
LENS-HD. SCREW
AM 4X10 DIN 7985-4S FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT 		002 -
077 FIXING CLAMP
FOR CABLE TO STOP LIGHT 		001 A 15 399 503 22  -
LENS-HD.SHEET METAL SCREW
B 4,8X9,5 DIN 7981 FOR CABLE TO STOP LIGHT 		001 -
078 FIXING CLAMP
FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT AT GUTTER 		002 A 00 098 888 78  -
079 FIXING CLAMP
FOR MAIN CABLE HARNESS AND BRAKE PIPE AT FRONT FRAME, CROSS MEMBER 		002 A 12 199 500 22  -
HEX. -HD.
SHEET METAL SCREW B 6,3X16 DIN 7976 FOR MAIN CABLE HARNESS AND BRAKE PIPE AT FRONT FRAME, CROSS MEMBER 		002 -

INSTRUMENTS AND CONTROLS 		- XXX XXX XXX XXXX -
PUSH-BUTTON SWITCH
FOR INSTRUMENT LIGHTING
Replaced by: A  000 545 06 11 		- A 12 054 000 44  -
080 PUSH-BUTTON SWITCH
FOR INSTRUMENT LIGHTING 		001 A 00 054 506 11  -
081 ESCUTCHEON 001 A 12 054 500 72  -
082 FELT RING 001 A 00 099 720 40  -
083 BUTTON 001 A 12 054 502 37  -

Replaced by: A  121 542 03 01 		- A 12 154 202 01  -
COMBI-INSTRUMENT WITH
KILOMETER INDICATION RATIO 0.96
Replaced by: A  121 542 03 01 		- A 12 154 200 01  -
084 COMBI-INSTRUMENT WITH
KILOMETER INDICATION RATIO 0.96 		001 A 12 154 203 01  -
COMBI-INSTRUMENT WITH
MILEAGE INDICATION RATIO 1.54 EXPORT 		001 A 12 154 201 01  -
COMBI-INSTRUMENT WITH
KILOMETER INDICATION RATIO 0.88 EXPORT - SPECIAL REQUEST FOR TIRES 6.40-15 		001 A 12 154 208 01  -
COMBI-INSTRUMENT WITH
MILEAGE INDICATION RATIO 1.425 EXPORT - SPECIAL REQUEST FOR TIRES 6.40-15 		001 A 12 154 209 01  -
085 KILOMETER COUNTER
RATIO 0.96 		001 A 00 154 243 06  -
MILEAGE COUNTER
RATIO 1.54 EXPORT 		001 A 00 154 242 06  -
KILOMETER COUNTER
RATIO 0.88 EXPORT - SPECIAL REQUEST FOR TIRES 6.40 - 15 		001 A 00 154 278 06  -
MILEAGE COUNTER
RATIO 1.425 EXPORT - SPECIAL REQUEST FOR TIRES 6.40 - 15 		001 A 00 154 279 06  -
086 OIL PRESSURE GAUGE 001 A 00 054 271 02  -

- TELETHERMOMETER, LENGTH OF CAPILLARY TUBE 1.700-MM
Replaced by: A  001 542 44 05 		- A 00 154 243 05  -
087
- TELETHERMOMETER, LENGTH OF CAPILLARY TUBE 1.700-MM 		001 A 00 154 244 05  -
088 FUEL GAUGE 001 A 00 054 244 03  -
089 TENSION SPRING
FOR FIXING OF COMBI-INSTRUMENT 		002 A 12 099 317 10  -
090 RUBBER FRAME
FOR COMBI-INSTRUMENT 		001 A 12 054 202 80  -
LAMP SOCKET
Replaced by: A  000 545 07 19 		- A 18 354 500 19  -
091 LAMP SOCKET 006 A 00 054 507 19  -
BULB
H 12 V 2 W DIN 72601 		006 -
FIXING CLAMP
FOR HOUSING, UPPER PART WITH LOWER PART, AT GLOVE BOX COVER PLATE 		002 A 00 098 834 78  -
CLOCK WITH MECHANIC DRIVE
UP TO CHASSIS 8506580 		001 A 12 054 203 11  -
CLOCK WITH
Replaced by: A  120 542 06 11 		- A 12 054 205 11  -
100 CLOCK WITH
ELECTRICAL DRIVE FROM CHASSIS 8506581 		001 A 12 054 206 11  -
LAMP SOCKET
Replaced by: A  000 545 07 19 		- A 18 354 500 19  -
101 LAMP SOCKET 001 A 00 054 507 19  -
BULB
H 12 V 2 W DIN 72601 		001 -
109 DIMMING RESISTOR
FOR INSTRUMENT LIGHTING 		001 A 00 054 508 31  -
110
SWITCH 		001 A 00 054 517 14  -
111 ESCUTCHEON 001 A 12 054 503 72  -
DISTANCE LIGHT
BLINKER SWITCH, BLACK
Replaced by: A  000 545 38 24 		- A 00 054 510 24  -
DISTANCE LIGHT
BLINKER SWITCH, BLACK UP TO CHASSIS 7516459 		001 A 00 054 538 24  -
DISTANCE LIGHT
BLINKER SWITCH, IVORY COLOURED SPECIAL REQUEST UP TO CHASSIS 7516459 		001 A 00 054 539 24  -
113 DISTANCE LIGHT
BLINKER SWITCH FROM CHASSIS 7517460 		001 A 00 054 576 24  -
REPLACED BY 180 545 04 37
FOR DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460
Replaced by: A  180 545 04 37 		- A 18 054 500 37  -
BLINKER LEVER KNOB, BLACK
FOR DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460
Replaced by: A  180 545 04 37 		- A 18 054 502 37  -
114 BLINKER LEVER KNOB, BLACK
FOR DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460 		001 A 18 054 504 37  -
REPLACED BY 180 545 05 37
FOR DISTANCE LIGHT BLINKER SWITCH SPECIAL REQUEST FROM CHASSIS 7517460
Replaced by: A  180 545 05 37 		- A 18 054 501 37  -
BLINKER LEVER
KNOB, IVORY COLOURED FOR DISTANCE LIGHT BLINKER SWITCH SPECIAL REQUEST FROM CHASSIS 7517460
Replaced by: A  180 545 05 37 		- A 18 054 503 37  -
BLINKER LEVER
KNOB, IVORY COLOURED FOR DISTANCE LIGHT BLINKER SWITCH SPECIAL REQUEST FROM CHASSIS 7517460 		001 A 18 054 505 37  -
115 COVER PLATE
FOR DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460 		001 A 18 046 200 23  -
REPLACED BY
AM 4X10 DIN 7988-4 S FROM CHASSIS 7516460 		- A 18 099 000 31  -
LENS-HD. COUNTERSUNK
SCREW AM 4X10 DIN 7988-4 S VERCHROMT FOR COVER PLATE AT JACKET TUBE FROM CHASSIS 7516460 		002 -
116 BLINKER TRANSMITTER 12 V
FOR DISTANCE LIGHT BLINKER SYSTEM 		001 A 00 054 423 32  -
117 REVERSING SWITCH
FOR TURN-INDICATOR BLINKER FROM CHASSIS 7521717 SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR 		001 A 00 054 591 24  -
BLINKER LEVER KNOB, BLACK
FOR REVERSING SWITCH FROM CHASSIS 7521717 SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) 		001 A 18 054 504 37  -
BLINKER LEVER
KNOB, IVORY COLOURED FOR REVERSING SWITCH FROM CHASSIS 7521717 SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOM 		001 A 18 054 505 37  -
ADDITIONAL CABLE HARNESS
FOR TURN-INDICATOR BLINKER LIGHT FROM CHASSIS 7521717 SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTO 		001 A 18 054 016 09  -
HEX. -HD.SCREW
M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER AT PARTITION 		002 -
LOCK WASHER
B 6 DIN 127 FOR BLINKER TRANSMITTER AT PARTITION 		002 -
OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 9503021 		001 A 18 054 008 60  -
OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 9503860 		001 A 18 054 009 60  -
OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT OIL PRESSURE GAUGE, COMBI-INSTRUMENT UP TO CHASSIS 9503021 		001 A 18 054 006 60  -
OIL PRESSURE GAUGE PIPE
FOR CONNECTION AT OIL PRESSURE GAUGE, COMBI-INSTRUMENT UP TO CHASSIS 9503860 		001 A 18 054 003 60  -
123 OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO HOSE FROM CHASSIS 9503022 		001 A 18 054 013 60  -
OIL PRESSURE GAUGE PIPE
FROM INSTRUMENT TO COUPLING PIECE FROM CHASSIS 9503861 		001 A 12 054 005 60  -
COUPLING PIECE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503861 		001 A 12 854 200 47  -
OIL PRESSURE GAUGE PIPE
FROM COUPLING PIECE TO HOSE FROM CHASSIS 9503861 		001 A 12 054 006 60  -

Replaced by: A  000 997 47 82 		- A 12 099 708 82  -
RUBBER HOSE 20 MM LONG
FOR BOX NUT TO OIL PRESSURE GAUGE PIPE - ORDER BY THE METER
Replaced by: A  000 997 47 82 		- A 18 099 715 82  -
RUBBER HOSE 20 MM LONG
FOR BOX NUT TO OIL PRESSURE GAUGE PIPE - ORDER BY THE METER UP TO CHASSIS 9503021 		001 A 00 099 747 82  -
RUBBER HOSE 20 MM LONG
FOR BOX NUT TO OIL PRESSURE GAUGE PIPE - ORDER BY THE METER UP TO CHASSIS 9503860 		001 A 00 099 747 82  -
GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED
Replaced by: A  186 997 06 81 		- A 18 699 705 81  -
124 GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 9503021 		002 A 18 699 706 81  -
124 GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 9503860 		002 A 18 699 706 81  -
124 GROMMET
FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED FROM CHASSIS 9503861 		001 A 18 699 706 81  -
LOCK WASHER
B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503021 		001 -
LOCK WASHER
B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503860 		001 -
HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503021 		001 -
HEX. NUT
M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503860 		001 -
125 SPRING WASHER
A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503022 		002 -
125 SPRING WASHER
A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503861 		002 -
126 HEX. NUT
BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503022 		001 -
126 HEX. NUT
BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503861 		001 -
127 RUBBER HOSE, 25 MM LONG
FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END 		002 A 00 098 709 32  -
128 FIXING CLAMP
FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END 		002 A 13 699 505 01  -
LENS-HD.SHEET METAL SCREW
BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END 		002 -
FIXING CLAMP
FOR CAPILLARY TUBE AT FRONT WALL 		001 A 13 699 505 01  -
LENS-HD. SHEET
METAL SCREW B 3,9X9,5 DIN 7981 FOR CAPILLARY TUBE AT FRONT WALL 		001 -
HOSE
FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503021 		001 A 12 154 000 59  -
HOSE
FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503860 		001 A 12 154 000 59  -
130 HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503022 		001 A 12 854 000 59  -
HOSE
FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503861 		001 A 12 154 002 59  -
131 STOP LIGHT SWITCH
SEE ALSO GROUP 42 		001 A 00 054 522 09  -
132 FOOT DIMMER SWITCH 001 A 00 054 504 12  -
133 INSULATING PLATE
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		001 A 13 654 501 58  -
LENS-HD. COUNTERSUNK
SCREW BM 4X30 DIN 7988-4S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002 -
135 CAGE CLIP WITH NUT
FOR FOOT DIMMER SWITCH AT PEDAL FLOOR 		002 A 00 099 025 91  -
GROMMET
FOR CABLE TO FOOT DIMMER SWITCH 		001 A 00 099 727 81  -
FLEXIBLE DRIVE
SHAFT, 1,750-MM LONG
Replaced by: A  120 542 03 07 		- A 12 054 204 07  -
137 FLEXIBLE DRIVE
SHAFT, 1,750-MM LONG 		001 A 12 054 203 07  -
138 GROMMET
FOR FLEXIBLE DRIVE SHAFT THROUGH FORKED SUPPORT FROM CHASSIS 75020313 		002 A 18 099 712 81  -
139 GROMMET
FOR SEALING 3RD PASSAGE OF FORKED SUPPORT FROM CHASSIS 75020313 		001 A 18 098 700 44  -
GROMMET
FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL
Replaced by: A  186 997 04 81 		- A 18 399 701 81  -
GROMMET
FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL 		001 A 18 699 704 81  -
GROMMET
FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL 		001 A 00 099 731 81  -
FIXING CLAMP
FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT 		002 A 00 098 834 78  -
140 FIXING CLAMP
FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT 		001 A 12 099 500 01  -
LENS-HD.SCREW
AM 5X10 DIN 7985-4S FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT 		001 -
LOCK WASHER
B 5 DIN 127 FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT 		001 -
144 THREE-ELEMENT VOLTAGE 001 A 00 015 455 06  -
145 RUBBER BUSHING 003 A 00 015 402 50  -
LOCK WASHER
B 6 DIN 127 FOR REGULATOR AT BRACKET, WHEEL ARCH PAN 		003 -
LENS-HD.SCREW
AM 6X20 DIN 7985-4S FOR REGULATOR AT BRACKET, WHEEL ARCH PAN 		003 -
148 GROMMET
FOR CABLE, VOLTAGE REGULATOR, GENERATOR 		003 A 00 099 707 81  -
ADDITIONAL CABLE HARNESS
SPECIAL REQUEST (FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA) 		001 A 12 154 017 09  -
INSULATING HOSE
100-MM LONG B 20X22,4 SW DIN 40621 ORDER BY THE METER SPECIAL REQUEST (FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE 		001 -
FUSE BOX, 2-POLE
SPECIAL REQUEST (FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA) 		001 A 00 054 503 01  -
CYLINDRICAL SCREW
AM 4X15 DIN 84-4 S FOR FUSE BOX AT AIR DUCT, LEFT SPECIAL REQUEST (FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA) 		001 -

Replaced by: A  001 542 20 20 		- A 00 054 273 20  -

Replaced by: A  001 542 20 20 		- A 00 054 244 20  -
HORN
Replaced by: A  001 542 20 20 		- A 00 154 207 20  -
150 HORN 001 A 00 154 220 20  -
HORN
FOR EXPORT CARS TO FRANCE 		001 A 00 054 271 20  -
HORN
Replaced by: A  001 542 08 20 		- A 00 054 245 20  -
HORN
SPECIAL REQUEST FOR TRIPLE-TONE SIGNALSYSTEM 		001 A 00 154 208 20  -
HORN
SPECIAL REQUEST FOR TRIPLE-TONE SIGNALSYSTEM 		001 A 00 054 246 20  -
152 HEX. -HD.SCREW
M 10X28 DIN 931-8 G FOR HORN AT BRACKET 		001 -
153 LOCK WASHER
B 10 DIN 127 FOR HORN AT BRACKET 		001 -
154 HEX. NUT
M 10 DIN 934-5 S FOR HORN AT BRACKET 		001 -
HEX. -HD.SCREW
M 10X28 DIN 931-8 G FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
LOCK WASHER
B 10 DIN 127 FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
HEX. NUT
M 10 DIN 934-5 S FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
BRACKET
FOR HORN AT CROSS TUBE, FRONT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 10 120 612 00 31 -
BRACKET
FOR HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 054 204 40  -
HEX. -HD.SCREW
M 6X15 DIN 933-8 G FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
LOCK WASHER
B 6 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
WASHER
A 6,4 DIN 9021 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
HEX. NUT
M 6 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		002 -
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		004 -
CYLINDRICAL SCREW
AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		004 -
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTION AT HORN 		002 -
CYLINDRICAL SCREW
AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN 		002 -
160 IGNITION COIL 001 A 00 015 800 03  -
161 FIXING CLAMP
FOR IGNITION COIL 		001 A 00 015 802 40  -
CYLINDRICAL SCREW
BM 5X40 DIN 84-4 S 		001 -
SQUARE NUT
M 5 DIN 562 		001 -
HEX. -HD.SCREW
M 6X12 DIN 933-8 G FOR IGNITION COIL AT BRACKET 		002 -
LOCK WASHER
B 6 DIN 127 FOR IGNITION COIL AT BRACKET 		002 -
WASHER
A 6,4 DIN 9021 FOR IGNITION COIL AT BRACKET 		002 -
167 RUBBER PROTECTIVE CAP
FOR IGNITION COIL 		002 A 00 054 602 35  -
CONTACTOR
Replaced by: A  000 542 27 19 		- A 00 054 215 19  -
CONTACTOR
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM AND SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND 		001 A 00 054 227 19  -
PUSH-PULL SWITCH
FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 00 054 506 11  -
ESCUTCHEON
FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 13 654 506 72  -
FELT RING
FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 00 099 720 40  -
KNOB
FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 13 630 209 01  -
ADDITIONAL CABLE HARNESS
SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 006 09  -
ADDITIONAL CABLE HARNESS
FROM 2ND TO 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 005 09  -
ELECTRICAL CABLE
FROM FUSE BOX TO RELAY TERMINAL 30/51 SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 001 38  -
ELECTRICAL CABLE
FROM RELAY TERMINAL 87 TO 2ND HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 002 38  -
GROUND CABLE
FROM 2ND HORN TO GROUND SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM 		001 A 12 154 003 38  -
ELECTRICAL CABLE,BLACK,
80-MM LONG B 1 DIN 72551 FROM RELAY TERMINAL 30 TO RELAY TERMINAL 86 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPO 		001 -
CABLE TERMINAL
4X0,8 N 261 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL 		005 -
GROMMET
SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL 		005 A 00 099 701 81  -
SOCKET WITHOUT HAND LAMP
Replaced by: A  000 545 05 25 		- A 00 054 513 25  -
SOCKET WITHOUT HAND LAMP
SPECIAL REQUEST 		001 A 00 054 505 25  -
ELECTRICAL CABLE,BLACK,
1,000-MM LONG A 1 DIN 72551 ORDER BY THE METER SPECIAL REQUEST 		001 -
INSULATING HOSE,
950-MM LONG B 3X3,8 SW DIN 40621 ORDER BY THE METER SPECIAL REQUEST 		001 -
BRACKET
FOR FUSE BOX SPECIAL REQUEST 		001 A 12 054 511 95  -
CYLINDRICAL SCREW
AM 5X10 DIN 84-4 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
LOCK WASHER
B 5 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
HEX. NUT
M 5 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST 		002 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA