FUEL FEED PUMP

EPC / Mercedes / 1 / FG / FG 121.000 / 09 / 006
‹ ›

№- Name A* Part number A

FUEL FEED PUMP 		- XXX XXX XXX XXXX -
001 FUEL FEED
PUMP WITH DUST FILTER SERIALLY MOUNTED WITHOUT DUST FILTER 		001 A 00 009 153 01  -
002 RELEASE SPRING
FOR HAND LEVER 		001 A 00 099 309 10  -
003 CIRCLIP
FOR HAND LEVER 		001 A 00 099 400 41  -

Replaced by: A  000 091 05 07 		- A 00 009 101 18  -

Replaced by: A  000 091 05 07 		- A 00 009 102 07  -
PUMP DRIVE LEVER
FOR PUMP LEVER
Replaced by: A  000 091 05 07 		- A 00 009 100 50  -
004 PUMP DRIVE LEVER
FOR PUMP LEVER 		001 A 00 009 105 07  -
007 SHAFT
FOR PUMP LEVER 		001 A 00 009 100 21  -
008 PRESSURE SPRING
FOR PUMP LEVER 		001 A 00 009 108 15  -
009 DIAPHRAGM SPRING 001 A 00 009 116 15  -
010 OIL PROTECTIVE PLATE 001 A 00 009 100 36  -
011 SPRING
FOR OIL PROTECTIVE PLATE 		001 A 00 009 101 15  -
012 DIAPHRAGM 001 A 00 009 104 28  -
013 COUNTERSUNK SCREW
AM 3,5X8 DIN 63-4 S FOR VALVE PLATE 		003 -
014 TOOTHED WASHER
V 3,7 DIN 6797 		003 -
015 VALVE PLATE 001 A 00 009 104 29  -
016 GASKET
FOR VALVE PLATE 		001 A 00 009 101 80  -
017 VALVE SPRING
FOR INTAKE AND EXHAUST VALVE 		002 A 00 009 104 19  -
VALVE PLATE
FOR INTAKE AND EXHAUST VALVE
Replaced by: A  000 091 07 29 		- A 00 009 100 29  -
018 VALVE PLATE
FOR INTAKE AND EXHAUST VALVE 		002 A 00 009 107 29  -
019 VALVE SEAT
FOR INTAKE VALVE 		001 A 00 009 100 31  -
020 SPRING RETAINER
FOR EXHAUST VALVE 		001 A 00 009 100 16  -
022 LOCK WASHER
B 5 DIN 127 FOR UPPER PART AT LOWER PART 		006 -
023 LENS-HD. SCREW
AM 5X15 DIN 85-4 S FOR UPPER PART AT LOWER PART 		006 -
024 STRAINER WITH 001 A 00 009 108 39  -
025 GASKET
FOR CAP 		001 A 00 009 106 80  -
026 CAP
FOR UPPER PART 		001 A 00 009 101 46  -
027 SEALING RING
A 6X12 DIN 7603 FIBER FOR CAP AT UPPER PART 		001 -
028 HEX. -HD. SCREW
M 6X12 DIN 931-8 G FOR CAP AT UPPER PART 		001 -
029 SEALING RING
A 8X12 DIN 7603 FIBER FOR SCREW PLUG AT UPPER PART 		001 -
030 SCREW PLUG
FOR UPPER PART 		001 A 00 009 103 56  -
031 WATER DRAIN PLUG
AT UPPER PART UP TO ENGINE 8502400 		001 A 00 009 108 71  -
032 PRESSURE SPRING
FOR WATER DRAIN PLUG UP TO ENGINE 8502400 		001 A 00 009 111 15  -
033 SEALING RING
A 12X16 DIN 7603 HARTFIBER FOR SCREW PLUG 		001 -
034 SCREW PLUG
AM 12X1,5 DIN 7604 AT UPPER PART 		001 -
035 SCREWED NIPPLE
6 DIN 7627 		002 -
036 SEALING RING
A 12X16 DIN 7603 FIBER FOR SCREWED NIPPLE 		002 -
36a DUST FILTER
AT FUEL FEED PUMP, LOWER PART SERIALLY NOT MOUNTED (ONLY VALID FOR SPARE PARTS DELIVERY) 		002 A 00 009 100 85  -
037 GASKET
FOR FUEL PUMP AT INTERMEDIATE FLANGE 		001 A 18 109 100 80  -
038 INSULATING FLANGE
FOR FUEL PUMP AT INTERMEDIATE FLANGE 		001 A 18 109 100 81  -
039 GASKET
FOR FUEL PUMP AT INTERMEDIATE FLANGE 		001 A 18 109 100 80  -
040 SPRING WASHER
B 8 DIN 137 FOR FUEL PUMP AT INTERMEDIATE FLANGE 		002 -
041 HEX. -HD. SOCKET SCREW
M 8X28 DIN 912-6 G FOR FUEL PUMP AT INTERMEDIATE FLANGE 		002 -
042 SEALING FLANGE
BETWEEN INTERMEDIATE FLANGE AND CYLINDER CRANKCASE 		001 A 18 009 101 80  -
043 INTERMEDIATE FLANGE
AT CYLINDER CRANKCASE 		001 A 18 009 001 44  -
044 BUSHING 001 A 18 009 101 50  -
045 SLEEVE 001 A 18 009 100 91  -
046 WASHER
8,4 DIN 125 FOR INTERMEDIATE FLANGE AT CYLINDER CRANKCASE 		002 -
047 HEX. -HD. SOCKET SCREW
M 8X30 DIN 912-6 G FOR INTERMEDIATE FLANGE AT CYLINDER CRANKCASE 		002 -
048 PUSH ROD
FOR FUEL PUMP DRIVE 		001 A 18 009 101 08  -

SUCTION NOISE DAMPER 		- XXX XXX XXX XXXX -
050 DAMPER FILTER
WITH PICO ELEMENT 		001 A 00 109 422 02  -
051 COVER WITH SEALING RING 001 A 00 009 439 06  -
052 RUBBER SEALING RING
BETWEEN COVER AND FILTER HOUSING 		001 A 00 009 436 80  -
053 RUBBER SEALING RING
BETWEEN COVER AND PICO ELEMENT 		001 A 00 009 437 80  -
054 SNAP CLOSURE 004 A 00 009 401 55  -
055 PICO ELEMENT 001 A 00 009 438 04  -
056 RUBBER SEALING RING
BETWEEN FILTER HOUSING AND PICO ELEMENT 		001 A 00 009 437 80  -
057 SUPPORT WITH
RUBBER SLEEVE 		001 A 00 009 417 41  -
058 RUBBER SLEEVE
FOR DAMPER FILTER AT CARBURETOR 		001 A 00 009 438 80  -
059 RUBBER WASHER
FOR SUPPORT AT DAMPER FILTER 		006 A 00 009 439 80  -
060 WASHER
FOR SUPPORT AT DAMPER FILTER 		003 A 00 009 400 76  -
061 CASTLE NUT
M 6 DIN 935-5 S FOR SUPPORT AT DAMPER FILTER 		003 -
062 COTTER PIN
1,5X15 DIN 94 FOR SUPPORT AT DAMPER FILTER 		003 -
063 WASHER
8,4 DIN 125 FOR DAMPER FILTER AT SUCTION TUBE 		004 -
064 LOCK WASHER
B 8 DIN 127 FOR DAMPER FILTER AT SUCTION TUBE 		004 -
065 HEX. NUT
M 8 DIN 934-5 S FOR DAMPER FILTER AT SUCTION TUBE 		004 -
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA