L SUSPENSION/FRONT
| № | Name | Ext. inf. | A* | Part number | A |
|---|---|---|---|---|---|
| 001 | CROSSMEMBER, TRANS SUPT(RR LIP OF TRANS SUPP MTG BRKT BENDS DOWNWARD. )(**VPI 1-877-846-8243) (CA, US)L1 | L1 | 01 | 12384869 | - |
| 001 | CROSSMEMBER, TRANS SUPT(LOWER) (CA, US)L1 | L1 | 01 | 15652560 | - |
| 001 | CROSSMEMBER, TRANS SUPT(RR LIP OF TRANS SUPP MTG BRKT BENDS UPWARD. )(**VPI 1-877-846-8243)L1 | L1 | 01 | 15694241 | - |
| 001 | CROSSMEMBER, TRANS SUPTL1 | L1 | 01 | 15996386 | - |
| 002 | NUT, M16X2, 15THK, 24. 5 O. D., 10, PZOR(FRT LWR CONT ARM) (CA, US)L1 | L1 | 11516133 | - | |
| 003 | NUT, S/KNU(M16X1. 5X16. 05)(6. 020) (CA, US)L1 | L1 | 15529829 | - | |
| 004 | BOLT, HEX, M8X1. 25X40, 33. 2THD, HDR PT, 10. 9, PC(ACDelco #11500921)L1 | L1 | 11500921 | - | |
| 005 | BOLT, HEX, M8X1. 25X40, 33. 2THD, HDR PT, 10. 9, PC(ACDelco #11500921)L1 | L1 | 11500921 | - | |
| 006 | BRACKET, FRT BRK HOSE(MTD TO FRAME HOLDS FRT BRK HOSE & FRT PIPE)(**VPI 1-877-846-8243) - LH (CA, US)L1 | L1 | 01 | 15708667 | - |
| 006 | BRACKET, FRT BRK HOSE(MTD TO FRAME HOLDS FRT BRK HOSE & FRT PIPE)(**VPI 1-877-846-8243) - RH (CA, US)L1 | L1 | 01 | 15708668 | - |
| 007 | STUD KIT, FRT UPR CONT ARM BALL(INCLS BOLTS, INSTR SH, NUTS, PIN, STUD ASM&WASHERS)L1 | L1 | 01 | 15687080 | - |
| 008 | BUSHING, FRT UPR CONT ARM(43MM DIA HOLE)(06. 104)L1 | L1 | 04 | 15607586 | - |
| 009 | ARM KIT, FRT UPR CONT(INCLS ARM, BOLT, NUTS, PIN) - LH (US, CA)L1 | L1 | 01 | 12376163 | - |
| 009 | ARM KIT, FRT UPR CONT(INCLS ARM, BOLT, NUTS, PIN) - RH (US, CA)L1 | L1 | 01 | 12376164 | - |
| 009 | ARM KIT, FRT UPR CONT(INCLS ARM, BOLT, NUTS, PIN) - RH (CA, US)L1 | L1 | 01 | 12388432 | - |
| 010 | NUT, S/KNU(M14X2. 0X14)(6. 020)L1 | L1 | 15529828 | - | |
| 011 | PIN, COTTER, 3. 0X30MML1 | L1 | 11514337 | - | |
| 012 | LINK KIT, FRT STAB SHF(INCLS BOLT, RET, INSL NUT & SPACER) (CA, US)L1 | L1 | 12542993 | - | |
| 013 | SHAFT, FRT STAB(30MM DIA)L1 | L1 | 01 | 15612681 | - |
| 014 | BUSHING, FRT LWR CONT ARM(FRT) (CA, US)L1 | L1 | 02 | 15652551 | - |
| 014 | BUSHING, FRT LWR CONT ARM(RR) (CA, US)L1 | L1 | 02 | 15652552 | - |
| 014 | BUSHING, FRT LWR CONT ARM(FRT)(USED ON STAMPED CONT ARM)(*********DO NOT PRINT. PART OF PANEL ASM 15604030 WHICH IS INCORRECT************) (CA, US)LM1 | LM1 | 02 | 15684067 | - |
| 015 | NUT, M12X1. 75L1 | L1 | 11516073 | - | |
| 016 | WASHER, FLAT, 13. 4X24. 8X2. 9, FLATS ON SIDES FOR ID, HARD, PS(FRT DIFF CARR)(ACDelco #15531205) (CA, US)L1 | L1 | 15531205 | - | |
| 017 | ABSORBER, FRT SHK(ACDelco #550-178)L1 | L1 | 22064854 | - | |
| 018 | ARM, FRT LWR CONT(WHEN USING ON 1998 & PRIOR, MUST USE THE 1999 FRT SUSP ALIGNMENT SPECS;ARM ASMS MUST BE CHGD IN SETS) - LH (CA, US)L1 | L1 | 01 | 15020097 | - |
| 018 | ARM, FRT LWR CONT(WHEN USING ON 1998 & PRIOR, MUST USE THE 1999 FRT SUSP ALIGNMENT SPECS;ARM ASMS MUST BE CHGD IN SETS USE T/W 12477623. ) - RH (CA, US)L1 | L1 | 01 | 15020098 | - |
| 018 | ARM, FRT LWR CONT(REQ DEALERS TO USE 15997071 (HUB) T/W 15998039 (SHIELD) T/W 18060561(KNUCKLE) TO STOP INTERFERENCE CONDITION) - LH (CA, US)L1 | L1 | 01 | 15992479 | - |
| 018 | ARM, FRT LWR CONT - RH (CA, US)L1 | L1 | 01 | 15992480 | - |
| 019 | STUD KIT, FRT LWR CONT ARM BALL(INCLS BOLT, INST SHTS, NUTS, PIN, STUD&WASH)(BOLTED FIT)L1 | L1 | 02 | 15687079 | - |
| 020 | WASHER, SPR LK M8. 0X15. 22X2. 58 PL(FRT LWR CONT ARM BALL STUD)L1 | L1 | 11500045 | - | |
| 021 | CALIPER, FRT BRK (CA, US)LM1 | LM1 | 18014744 | - | |
| 022 | NUT, FRT WHL DRV SHF(M24X2X22)L1 | L1 | 02 | 11609826 | - |
| 023 | WASHER, FRT WHL DRV SHF(24 DIA, 5. 4 THK)(06. 063)L1 | L1 | 02 | 15522089 | - |
| 024 | ROTOR, FRT BRK(5 LUG)(SERVICE ROTOR ONLY)(ACDelco #177-732)L1 | L1 | 15679711 | - | |
| 024 | BOLT, FRT LWR CONT ARM(M16X2X117, 46THD)(HEX)(08. 900)L1 | L1 | AR | 15989748 | - |
| 024 | BOLT, FRT LWR CONT ARM(M16X2X137, 46 THD, 10. 9, 7114M, CONE POINT)L1 | L1 | 15989747 | - | |
| 025 | BOLT, S/KNU(BOLT, S/KNU |
L1 | 06 | 15995614 | - |
| 025 | BOLT, S/KNU(M14X2X50, 30THD, W/14 OD SHLD, 22. 0 OD, 10. 9)(HAS WASHER RETAINED ON BOLT BY THREADS)(06. 104)L1 | L1 | 06 | 15995614 | - |
| 026 | WASHER, S/KNU(PART OF 25) | - | |||
| 027 | HUB, FRT WHL(INCLS SENSOR, WHL SPD, MTG BOLTS)(**VPI 1-877-846-8243) (CA, US)L1 | L1 | 02 | 15693440 | - |
| 027 | HUB, FRT WHL(INCLS WHL SPD SENSOR)(5 STUDS)(ACDelco #FW173) - LHL1 | L1 | 01 | 15997073 | - |
| 027 | HUB, FRT WHL(INCLS WHL SPD SENSOR)(5 STUDS)(ACDelco #FW172) - RHL1 | L1 | 01 | 15997074 | - |
| 027 | STUD, FRT WHL(HUB ASM 15679577, 15693440)(SERRATED) (CA, US)L1 | L1 | 10 | 15627518 | - |
| 028 | BOLT, HEX, M8X1. 25X16, FULL THD, 9. 8, PC(FRT BRK SHLD) (CA, US)L1 | L1 | 11509589 | - | |
| 028 | WASHER, FLAT, M8L1 | L1 | 11609679 | - | |
| 029 | SHIELD, FRT BRK(DISC SPH)(SHIELD IS ATTACHED TO KNUCKLE WITH 3 SCREWS)(**VPI 1-877-846-8243) - LH (CA, US)L1 | L1 | 01 | 15627243 | - |
| 029 | SHIELD, FRT BRK(DISC SPH)(SHIELD IS ATTACHED TO KNUCKLE WITH 3 SCREWS) - RH (CA, US)L1 | L1 | 01 | 15627244 | - |
| 029 | SHIELD, FRT BRK(DISC SPH)(TWO SCREW STYLE)(ACDelco #15649981) (CA, US)L1 | L1 | 02 | 15649981 | - |
| 029 | SHIELD, FRT BRK (CA, US)L1 | L1 | 02 | 15998039 | - |
| 030 | KNUCKLE, STRG(REPLS 15649977) - LH (CA, US)L1 | L1 | 01 | 18060571 | - |
| 030 | KNUCKLE, STRG(**VPI 1-877-846-8243) - RH (CA, US)L1 | L1 | 01 | 18060572 | - |
| 030 | KNUCKLE, STRG(USE T/W 15649981 SHIELD & 2 ATTCH SCREWS REQD)(**VPI 1-877-846-8243) - RH (CA, US)L1 | L1 | 01 | 18060572 | - |
| 030 | KNUCKLE, STRG - LHL1 | L1 | 01 | 18060561 | - |
| 031 | SEAL, FRT WHL INR BRG(ACDelco #290-259)L1 | L1 | 02 | 15521904 | - |
| 032 | SHAFT KIT, FRT WHL DRV(**VPI 1-877-846-8243) (CA, US)L1 | L1 | 02 | 26037369 | - |
| 032 | SHAFT KIT, FRT WHL DRV(**VPI 1-877-846-8243) (CA, US)L1 (EXC EUROPEAN PROVISIONS(VD1) | L1 (EXC EUROPEAN PROVISIONS(VD1) | 02 | 26037369 | - |
| 033 | BOLT, FRT WHL DRV SHF(M10X1. 5X25, 10. 9)(HEX)(08. 900)L1 | L1 | 12 | 11509419 | - |
| 034 | CLAMP, SPRG BAND, 14. 2MM, 9/16 OD HOSE, PORL1 | L1 | 25526358 | - | |
| 035 | HOSE, FUEL-OIL EVAPL1 | L1 | 09438315 | - | |
| 036 | STRAP, TIE 0. 38" WIDTH, BUNDLE DIA 1/16"-1-3/4", 8. 27" LENGTH, NYLON 6/6 FITS 0.L1 | L1 | 19130464 | - | |
| 037 | VENT, FRT DIFF CARR(VENT STEM W/CAP)(04. 510)(ACDelco #25892279)L1 | L1 | 01 | 25892279 | - |
| 038 | NUT, HFH, M12X1. 75, 14THK, 25. 6 O. D., 10, ZCL1 | L1 | 11515744 | - | |
| 039 | WASHER, FLAT, 13. 4X34X2. 5 HARD PSL1 | L1 | 11509592 | - | |
| 040 | AXLE, FRT(SEE FRONT DRIVE AXLE ASSEMBLY ILLUSTRATION AT BEGINNING OF GROUP 6. 000 FOR DETAILS. ) | - | |||
| 041 | BRACKET, FRT DIFF CARR (CA, US)L1 | L1 | 01 | 15656162 | - |
| 042 | BUSHING, FRT DIFF CARR BRKT(05. 500) (CA, US)L1 | L1 | 02 | 15656163 | - |
| 043 | WASHER, FLAT, 13. 4X24. 8X2. 9, FLATS ON SIDES FOR ID, HARD, PS(FRT DIFF CARR)(ACDelco #15531205) (CA, US)L1 | L1 | 15531205 | - | |
| 044 | BOLT, FRT DIFF CARRL1 | L1 | 15989895 | - | |
| 045 | BOLT, FRT DIFF CARRL1 | L1 | 15989895 | - | |
| 046 | BRACE, FRT LWR CONT ARM(PART OF 18) | - | |||
| 046 | BRACE, FRT LWR CONT ARM BRKT(06. 178)L1 | L1 | 02 | 15682560 | - |
| 047 | BOLT/SCREW- HEX, M14X2X35, 30 THD, 10. 9, 711(USE T/W 15531206 WASHER) (CA, US)L1 | L1 | 11516460 | - | |
| 048 | NUT, M10 X 1. 5 (CA, US)L1 | L1 | 11500424 | - | |
| 049 | STUD, FRT STAB SHF INSL CLA(**VPI 1-877-846-8243)L1 | L1 | 01 | 15628847 | - |
| 050 | BOLT, HEX TAP M10X1. 5X30 FULL THD, T PT STL 6170 PSL1 | L1 | 11509171 | - | |
| 051 | CLAMP, FRT STAB SHF INSLLM1 | LM1 | 02 | 88891781 | - |
| 052 | INSULATOR, FRT STAB SHF(RUBBER)(28. 6MM STAB BAR)1(05)(EXC YF7) | 1(05)(EXC YF7) | 14071381 | - | |
| 053 | BOLT, (M12X1. 75X36)(FRT DIFF CARR BRKT)(0. 029) (CA, US)L1 | L1 | 14089928 | - | |
| 053 | BOLT, HFH, M12X1. 75X35, 31 THD, 26. 6 OD, 10. 9 MAT, 7114M FIN, MACH(FRT DIFF CARR BRKT)L1 | L1 | 11515776 | - | |
| 054 | BOLT, HEX M16X2X114 10. 9 PC(FRT LWR CONT ARM) (CA, US)L1 | L1 | 15989896 | - | |
| 054 | BOLT, FRT LWR CONT ARM(M16X2X114) (CA, US)L1 | L1 | 15989896 | - | |
| 055 | L1 | L1 | 11517635 | - | |
| 056 | BAR, FRT TORS(WHEN USED ON 90-98 L-VAN, TORSION BARS MUST BE REPLD IN SETS T/W 15990708 ADJ ARM-QTY 2, THIS TORSION BAR DOES NOT REQ P/N 15699376 ADAPTER. ) - LH (US, CA)L1 SUSP(6WA),(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD) | L1 SUSP(6WA),(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD) | 01 | 15990701 | - |
| 056 | BAR, FRT TORS(WHEN USED ON 90-98 L-VAN, TORSION BARS MUST BE REPLD IN SETS T/W 15990708 ADJ ARM-QTY 2, THIS TORSION BAR DOES NOT REQ P/N 15699376 ADAPTER. )(BAR IS 6. 3" SHORTER THAN 98 AND PRIOR ORIGINAL BAR) - LH (US, CA)L1 SUSP(6WA),(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(7WF) | L1 SUSP(6WA),(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(7WF) | 01 | 15990701 | - |
| 056 | BAR, FRT TORS(WHEN USED ON 90-98 L-VAN, TORSION BARS MUST BE REPLD IN SETS T/W 15990708 ADJ ARM-QTY 2, THIS TORSION BAR DOES NOT REQ P/N 15699376 ADAPTER. )(BAR IS 6. 3" SHORTER THAN 98 AND PRIOR ORIGINAL BAR) - LH (US, CA)L1 SUSP(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(7WF) | L1 SUSP(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(7WF) | 01 | 15990701 | - |
| 056 | BAR, FRT TORS(WHEN USED ON 92-95 L-VAN, TORSION BARS MUST BE RPLD IN SETS T/W 15990708 ADJ ARM-QTY 2, THIS TORSION BAR DOES NOT REQ P/N 15699376 ADAPTER. ) - LH (CA, US)L1 SUSP(6WD) | L1 SUSP(6WD) | 01 | 15990705 | - |
| 056 | BAR, FRT TORS(7WD) - RH (CA, US)L1 SUSP(7WD) | L1 SUSP(7WD) | 01 | 15627508 | - |
| 056 | BAR, FRT TORS(WHEN USED ON 90-98 L-VAN, TORSION BARS MUST BE RPLD IN SETS T/W 15990708 ADJ ARM-QTY 2, THIS TORSION BAR DOES NOT REQ P/N 15699376 ADAPTER. ) - RH (US, CA)L1 SUSP(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(6WA) | L1 SUSP(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(6WA) | 01 | 15990702 | - |
| 056 | BAR, FRT TORS(WHEN USED ON 90-98 L-VAN, TORSION BARS MUST BE RPLD IN SETS T/W 15990708 ADJ ARM-QTY 2, THIS TORSION BAR DOES NOT REQ P/N 15699376 ADAPTER. )(BAR IS 6. 3" SHORTER THAN 98 AND PRIOR ORIGINAL BAR) - RH (US, CA)L1 SUSP(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(7WF) | L1 SUSP(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(7WF) | 01 | 15990702 | - |
| 056 | BAR, FRT TORS(WHEN USED ON 90-98 L-VAN, TORSION BARS MUST BE RPLD IN SETS T/W 15990708 ADJ ARM-QTY 2, THIS TORSION BAR DOES NOT REQ P/N 15699376 ADAPTER. )(BAR IS 6. 3" SHORTER THAN 98 AND PRIOR ORIGINAL BAR) - RH (US, CA)L1 SUSP(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(7WF),(6WA) | L1 SUSP(6WB),(6WC),(6WD),(6WF),(7WA),(7WB),(7WC),(7WD),(7WF),(6WA) | 01 | 15990702 | - |
| 056 | BAR, FRT TORS(WHEN USED ON 92-95 L-VAN, TORSION BARS MUST BE RPLD IN SETS T/W 15990708 ADJ ARM-QTY 2, THIS TORSION BAR DOES NOT REQ P/N 15699376 ADAPTER. ) - RH (CA, US)L1 SUSP(7WD) | L1 SUSP(7WD) | 01 | 15990706 | - |
| 057 | BOLT, FRT UPR CONT ARM(BOLT, FRT UPR CONT ARM ADJ)(*KIT1) | - | |||
| 058 | CAM, FRONT UPPER CONTROL ARM(*KIT1) | - | |||
| 059 | NUT, FRONT UPPER CONTROL ARM ADJUSTING BOLT(*KIT1) | - | |||
| 060 | ARM, TORS BAR ADJ (CA, US)L1 | L1 | 02 | 15623498 | - |
| 060 | ARM, TORS BAR ADJ(WHEN USED ON 92-95 L-VAN, ADJUSTER ARM ALSO REQ P/N 15699376 ADAPTER. )(FITS 2 1/8" HEX END SHAFT)(**VPI 1-877-846-8243)L1 | L1 | 02 | 15668405 | - |
| 060 | ARM, TORS BAR ADJ(WHEN USED ON 92-95 L-VAN, ADJUSTER ARM ALSO REQ P/N 15699376 ADAPTER. )(FITS 2 1/8" HEX END SHAFT)(**VPI 1-877-846-8243)L1 (EXC EUROPEAN PROVISIONS(VD1) | L1 (EXC EUROPEAN PROVISIONS(VD1) | 02 | 15668405 | - |
| 060 | ARM, TORS BAR ADJ (CA, US)L1 BLACK UNDERHOOD CORROSION PREVENTIVE(VG4),(EXC EUROPEAN PROVISIONS(VD1) | L1 BLACK UNDERHOOD CORROSION PREVENTIVE(VG4),(EXC EUROPEAN PROVISIONS(VD1) | 01 | 15969299 | - |
| 060 | ARM, TORS BAR ADJ(WHEN USED ON 92-95 L-VAN, ADJUSTER ARM DOES NOT REQ ADAPTER. )(FITS 1 1/2" HEX END SHAFT) (CA, US)L1 | L1 | 02 | 15990708 | - |
| 061 | ADAPTER, TORS BAR ANC (CA, US)L1 | L1 | 02 | 15650848 | - |
| 061 | ADAPTER, TORS BAR ANC(WHEN USED ON 92-95 L-VAN, ADAPTER IS ONLY REQD WHEN USED T/W 15668405 ADJUSTER ARM. )(**VPI 1-877-846-8243) (CA, US)L1 | L1 | 02 | 15699376 | - |
| 062 | BOLT, TORS BAR ADJ (CA, US)LM1 | LM1 | 02 | 14041596 | - |
| 062 | BOLT, TORS BAR ADJ(M12X1. 75X42)(HEX HD POINTED)(W/NYLON LOCK) (CA, US)L1 | L1 | 02 | 14041596 | - |
| 063 | SEAL, TORS BAR(00. 659)(**VPI 1-877-846-8243)L1 | L1 | 02 | 15640014 | - |
| 064 | NUT, TORS BAR ADJL1 | L1 | 02 | 15623499 | - |
| 065 | NUT, HEX, M10X1. 5, 9. 6THK, 15. 5 O. D., 10, CAD (CA, US)L1 | L1 | 11501033 | - | |
| 066 | WASHER, FRT LWR CONT ARM(16. 38IDX23. 87ODX3. 27)(06. 168) (CA, US)L1 | L1 | 08 | 15567836 | - |
| 067 | NUT, HFH LK 16X2X18. 9 34. 2 OD 10 7111M PREV TORQL1 | L1 | 11516383 | - | |
| 068 | BUMPER, FRT LWR CONT ARM(65MM HIGH) (CA, US)L1 | L1 | 02 | 15592548 | - |
| 069 | BOLT, FRT LWR CONT ARM(M16X2X117, 46THD)(HEX)(08. 900)L1 | L1 | AR | 15989748 | - |
| 069 | BOLT, FRT LWR CONT ARM(M16X2X137, 46 THD, 10. 9, 7114M, CONE POINT)L1 | L1 | 15989747 | - | |
| K01 | CAM KIT, FRT UPR CONT ARM ADJ(INCLS BOLTS, CAMS&NUTS)(INDIVIDUAL COMPONENTS NOT SOLD SEPARATELY)L1 | L1 | 01 | 15637049 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy