Intake manifold & throttle body
| № | Name | Ext. inf. | A* | Part number | A |
|---|---|---|---|---|---|
| 001 | Manifold, int(**vpi 1-877-846-8243)MR08 1.0-6(LP2) | MR08 1.0-6(LP2) | 01 | 91171829 | - |
| 001 | Manifold, int(**vpi 1-877-846-8243)M08 1.0-6(LP2) | M08 1.0-6(LP2) | 01 | 91173274 | - |
| 002 | Gasket, int manifM08 1.0-6(LP2) | M08 1.0-6(LP2) | 01 | 96060060 | - |
| 003 | Bolt, m8x1. 25x25 9. 8 | 11508476 | - | ||
| 004 | Bolt, flg hd(m8-1. 25x35)9. 8 zor | 11515759 | - | ||
| 005 | Stud, int manif(m8x1. 25x41)(8. 981)M | M | 91177661 | - | |
| 006 | Nut, hfh, m8x1. 25, 17. 9 od, 738 thk, 13mm hex, 10, zf(8. 915)(acdelco #11514596) | 11514596 | - | ||
| 007 | Hose, therm bypass(water bypass from therm hsg to int manif)(03. 276)M08 1.0-6(LP2) | M08 1.0-6(LP2) | 01 | 91171184 | - |
| 008 | Clamp, int manif hose(300n force)(blk ox coating)(01. 240)M | M | 02 | 15012559 | - |
| 009 | Injector, throt body fuel(upper & lower)(includes idle speed control motor)M | M | 01 | 91172108 | - |
| 009 | Injector, throt body fuel(upper & lower)(includes idle speed control motor)M08 1.0-6(LP2) | M08 1.0-6(LP2) | 01 | 91172108 | - |
| 010 | Gasket, throt body(between body & heater)(rubber w/aluminum coating)(03. 726)(**vpi 1-877-846-8243)M | M | 01 | 91172182 | - |
| 011 | Heater, throt bodyM | M | 01 | 91172187 | - |
| 011 | Heater, throt bodyM08 1.0-6(LP2) | M08 1.0-6(LP2) | 01 | 91172187 | - |
| 012 | Gasket, throt body htr(between heater & manifold)M | M | 01 | 91172181 | - |
| 013 | Bolt, throt body(for mtg throt asm to manif)(m8x1. 25x110)(04. 104)(**vpi 1-877-846-8243)M08 1.0-6(LP2) | M08 1.0-6(LP2) | 04 | 96057598 | - |
| 013 | Bolt, throt body(for mtg throttle asm to manifold)(m8x1. 25x110)(04. 104)(**vpi 1-877-846-8243)M | M | 04 | 96057598 | - |
| 014 | Bracket, a/cl(w/setting bolt to mount air cleaner to throttle asm)M | M | 01 | 91176657 | - |
| 014 | Bracket, a/cl(w/setting bolt to mount air cleaner to throttle asm)M08 1.0-6(LP2) | M08 1.0-6(LP2) | 01 | 91176657 | - |
| 015 | Bolt hex w/wave spr wa, m6x1x16 mfzn-7t | 30011102 | - | ||
| 016 | Hose, throt body htr inl(#1)(short)MR08 1.0-6(LP2) | MR08 1.0-6(LP2) | 01 | 91176794 | - |
| 017 | Hose, throt body htr otlt(#2, long)M | M | 01 | 91174447 | - |
| 017 | Hose, throt body htr otlt(#2, long)M08 1.0-6(LP2) | M08 1.0-6(LP2) | 01 | 91174447 | - |
| 017 | Hose, throt body htr otlt(#2, long, when repl 96068428 also use 91174343)(use beginning w/vin w6728651, 1st des is 96068428)MR08 1.0-6(LP2),(2ND DES) | MR08 1.0-6(LP2),(2ND DES) | 01 | 91174447 | - |
| 018 | Clamp, worm gear, 14. 22-26. 92 dia, 13. 25 thk, stainless stl. | 11609970 | - | ||
| 019 | Retainer, trans fluid clr hose(inlet & outlet, holds 2 hoses)(03. 335)M | M | 01 | 91175065 | - |
| 019 | Retainer, trans fluid clr hose(inl & otlt)(2-11mm i. d. opg)(double-u shaped)(03. 335)M | M | 01 | 96051528 | - |
| 019 | Retainer, trans fluid clr hose | 91175065 | - | ||
| 020 | Bracket, eng lift(mounted to intake manifold)MR08 EQUIPMENT PKG(Z41)(CANADIAN PONTIAC),CANADIAN(Z49) | MR08 EQUIPMENT PKG(Z41)(CANADIAN PONTIAC),CANADIAN(Z49) | 01 | 91171169 | - |
| 020 | Bracket, eng lift(mounted on exhaust & intake manifold, 1 mounted on trans case for auto trans only)(**vpi 1-877-846-8243)M 1.0-6(LP2) | M 1.0-6(LP2) | 01 | 96062363 | - |
| 021 | Strap, tie 0. 38" width, bundle dia 1/16"-1-3/4", 8. 27" length, nylon 6/6 fits 0. | 19130464 | - | ||
| 022 | Sensor, eng cool t/ga(mtd in therm hsg for l72 4 cyl eng, mtd in int manif for lp2 3 cyl eng)(sending unit for temp gauge in inst clstr)(**vpi 1-877-846-8243)M | M | 01 | 91171831 | - |
| 100 | Motor, elek throt actr(referred to as isc motor, bolted to back of throttle)M | M | 01 | 91173095 | - |
| 100 | Motor, elek throt actr(referred to as isc motor, bolted to back of throttle)M08 | M08 | 01 | 91173095 | - |
| 101 | Regulator, fuel press(not used 1995 & fwd) | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy