4 cyl. engine - part ii
| № | Name | Ext. inf. | A* | Part number | A |
|---|---|---|---|---|---|
| 001 | Cover, valve | - | |||
| 002 | Reinforcement, rkr arm cvr | - | |||
| 003 | Cap, oil filler | - | |||
| 004 | Reinforcement, rkr arm cvr frt | - | |||
| 005 | Bolt, hex (5/16"-18 x 5/8") | - | |||
| 006 | Grommet, c/case vent pipe | - | |||
| 007 | Pipe, c/case vent | - | |||
| 008 | Grommet, c/case vent | - | |||
| 009 | Clip, vacuum pipe | - | |||
| 010 | Gasket, rkr arm cvr | - | |||
| 011 | Cover, air cleaner (pontiac only) | - | |||
| 012 | Nut (1/4"-20) | - | |||
| 013 | Air cleaner, carburetor | - | |||
| 014 | Gasket, air cleaner to carb | - | |||
| 015 | Nut (5/16"-24) | - | |||
| 016 | Carburetor asm | - | |||
| 017 | Insulator, carb to h/shld (see cat) | - | |||
| 018 | Shield, carb heat (see charts) | - | |||
| 019 | Gasket, air heat (see charts) | - | |||
| 020 | Tube, egr distr (primary bore) | - | |||
| 021 | Stud, carb to mfld (5/16"-18 x 24 x 3 9/16") | - | |||
| 022 | Gasket, a/cl | - | |||
| 023 | Screw, hex (5/16"-18 x 7/8") | - | |||
| 024 | Silencer, a/cl | - | |||
| 025 | Tube, air heat | - | |||
| 026 | Screw, tap (#8-18 x 1/2") | - | |||
| 027 | Lock, valve spring cap | - | |||
| 028 | Seal, valve oil | - | |||
| 029 | Cap, intake valve | - | |||
| 030 | Shield, valve stem oil | - | |||
| 031 | Spring, w/damper valve | - | |||
| 032 | Bolt, cyl head w/stud | - | |||
| 033 | Bolt, cyl head (1/2"-13 x 3 37/64") | - | |||
| 034 | Pin, mfld to head (1/2" x 3/4") | - | |||
| 035 | Stud, mfld to hd (3/8"-16 x 29/32") | - | |||
| 036 | Tube, egr dist (sec bore) | - | |||
| 037 | Bolt, intake to exhaust manifold | - | |||
| 038 | Clamp, intake & exh mfld to hd | - | |||
| 039 | Washer, flat (1" od x 25/64" id) | - | |||
| 040 | Nut (3/8"-24) | - | |||
| 041 | Spring, accel pull back | - | |||
| 042 | Fitting, vacuum w/cap | - | |||
| 043 | Screw, tap (#10-16 x 3/8") | - | |||
| 044 | Switch, a/c cmpr cut-off (at carb) | - | |||
| 045 | Bracket, throttle control cbl mtg | - | |||
| 046 | Clip, throttle control idler rod | - | |||
| 047 | Retainer (3/8") | - | |||
| 048 | Lever, throttle control idler | - | |||
| 049 | Stud, lever (5/16"-18 x 2 1/16" ol x 1/2") | - | |||
| 050 | Shield, intake & exhaust manifold | - | |||
| 051 | Gasket, intake & exhaust manifold | - | |||
| 052 | Pin (part of valve) | - | |||
| 052 | Valve, exhaust heat | - | |||
| 053 | Screw, tap (3/8"-16 x 1") | - | |||
| 054 | Shroud, exh manifold | - | |||
| 055 | Stud, shroud to exh mfld (#8 x 3/8") | - | |||
| 056 | Sleeve, egr intake pipe | - | |||
| 057 | Nut, egr intake pipe to mfld | - | |||
| 058 | Pipe, egr intake to exh mfld | - | |||
| 059 | Bracket, egr pipe to block | - | |||
| 060 | Bolt, hex (3/8"-16 x 3/4") | - | |||
| 061 | Screw, tap (1/4"-14 x 3/4") | - | |||
| 062 | Bolt, intake & exh mfld to cyl hd | - | |||
| 063 | Clamp, intake & exh mfld to cyl hd | - | |||
| 064 | Bushing, exh cont vlv shft to mfld | - | |||
| 065 | Manifold, exhaust | - | |||
| 066 | Manifold, intake | - | |||
| 067 | Stud, mfld to head (3/8"-24 x 3/8"-16 x 2") | - | |||
| 068 | Stud, mfld to head (3/8"-24 x 3/8"-16 x 1 1/2") | - | |||
| 069 | Gasket, int & exh manifold | - | |||
| 070 | Valve, intake | - | |||
| 071 | Valve, exhaust | - | |||
| 072 | Guide, vlv push rod (1980) | - | |||
| 072 | Rod, valve push | - | |||
| 073 | Gasket, cyl head | - | |||
| 074 | Bolt (5/16"-18 x 7/8") | - | |||
| 075 | Valve, egr back press trans | - | |||
| 076 | Bolt, hex (3/8"-16 x 7/8") | - | |||
| 077 | Adapter, egr back press valve | - | |||
| 078 | Bolt, hex (5/16"-18 x 3 3/4") | - | |||
| 079 | Valve, egr | - | |||
| 080 | Bolt, hex (5/16"-18 x 3/4") | - | |||
| 081 | Gasket, egr & back press valve | - | |||
| 082 | Tee, fitting to egr & efe valve | - | |||
| 083 | Hose, vacuum | - | |||
| 084 | Valve, vacuum break delay | - | |||
| 085 | Valve, efe emission cont vac | - | |||
| 085 | Valve, spark retard delay | - | |||
| 086 | Bracket, pulsair check valve | - | |||
| 087 | Hose, vacuum (3/4" id) | - | |||
| 088 | Pipe, check valve hose | - | |||
| 089 | Grommet, vent pipe | - | |||
| 090 | Nut, hex (1/4"-20) | - | |||
| 091 | Washer, flat (3/8" id x 3/4" od) | - | |||
| 092 | Nut, hex (3/8"-16) | - | |||
| 093 | Valve, pulsair check | - | |||
| 094 | Lifter asm, valve | - | |||
| 095 | Gasket, coolant outlet (rubber) | - | |||
| 096 | Head, cyl | - | |||
| 097 | Bolt, hex (3/8"-16 x 1") | - | |||
| 098 | Stud, thermo hsg (3/8"-16 x 2 1/4") | - | |||
| 099 | Housing, thermostat | - | |||
| 100 | Switch, efe/egr cont | - | |||
| 100 | Switch, efe/egr cont (cal) | - | |||
| 101 | Nipple, thermo housing | - | |||
| 102 | Valve, egr thermal vac | - | |||
| 102 | Valve, thermo vac (exc cal) | - | |||
| 103 | Gauge asm, thermo (pin type) | - | |||
| 104 | Bracket, alt adj & eng lift (exc a/c shown) | - | |||
| 105 | Bolt, hex (3/8"-16 x 3/4") | - | |||
| 106 | Thermostat, coolant temp | - | |||
| 107 | Gasket, outlet fitting (plastic) | - | |||
| 108 | Outlet, eng coolant | - | |||
| 109 | Bolt, hex (3/8"-16 x 1 1/4") | - | |||
| 110 | Guide, push rod | - | |||
| 111 | Bolt, rkr arm ball | - | |||
| 111 | Stud, valve ball | - | |||
| 112 | Arm kit, valve rocker | - | |||
| 113 | Plug, spark | - | |||
| 114 | Ball, valve | - | |||
| 115 | Nut, valve ball ret (3/8"-24 x 1/2") | - | |||
| 116 | Hose, vacuum (3/8" id) | - | |||
| 117 | Tee, c/case vent hose | - | |||
| 118 | Grommet, c/case vent pipe | - | |||
| 119 | Valve, c/case vent | - | |||
| 120 | Pipe, fuel (stock 8. 963 & 8. 964) | - | |||
| 121 | Clip, fuel feed pipe | - | |||
| 122 | Screw, tap (m6. 3 x 1. 61 x 12) | - | |||
| 123 | Rod, throttle cont idler | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy