Crankcase housing.
| № | Name | Ext. inf. | A* | Use of | Part number |
|---|---|---|---|---|---|
| crankcase housing 2.0 ltr.
petrol eng.+
CVJA |
2.0 ltr. | petrol eng.+ CVJA |
|||
| 1 | crankcase housing no replacement part for this use: |
||||
| 2 | timing case | 1 | 06K 109 210 AF | ||
| 3 | cylinder pin 6X20
|
6X20 | 2 | 026 103 139 | |
| 4 | oil spray jet | 4 | 06L 103 154 K | ||
| 5 | sealing flange | 1 | 06K 103 171 G | ||
| 6 | end cap 36,6
|
36,6 | 1 | 036 103 113 A | |
| 7 | dowel sleeve 16X13,5
|
16X13,5 | 2 | 022 103 139 B | |
| 8 | shaft oil seal 45X60X8
|
45X60X8 | 1 | 06L 103 085 B | |
| 9 | bungs | 1 | 06H 115 418 D | ||
| 10 | chain sprocket | 1 | 06K 103 319 A | ||
| 11 | intermediate shaft | 1 | 06H 103 559 B | ||
| 12 | pipe | 1 | 06K 103 199 L | ||
| 12 | pipe | 1 | 06K 103 199 A | ||
| 13 | needle bearing - | 2 | 06K 103 300 C | ||
| grey | 06K 103 300 C 5 28 | ||||
| blue | 06K 103 300 C 0 01 | ||||
| natural colours | 06K 103 300 C 9 09 | ||||
| 14 | repair set for balancer shafts D >> - 25.07.2016 |
1 | 06H 198 205 T | ||
| (14) | repair set for balancer shafts D - 25.07.2016>> |
1 | 06H 198 205 AG | ||
| 15 | pulley | 1 | 06H 103 731 G | ||
| 16 | toothed belt guard | 1 | 06K 109 121 E | ||
| 17 | washer not for this model |
||||
| 18 | socket head bolt with inner multipoint head M8X55
|
M8X55 | 1 | N 105 449 04 | |
| 19 | end cap also use: 10
D 200 002 A1 |
10 D 200 002 A1 |
5 | N 011 910 4 | |
| 20 | end cap also use: 25
D 200 002 A1 |
25 D 200 002 A1 |
1 | N 011 919 4 | |
| 21 | end cap also use: 14
D 200 002 A1 |
14 D 200 002 A1 |
2 | N 011 907 8 | |
| 22 | silicone sealant | X | D 174 003 M2 | ||
| 23 | cylinder pin 8X12
|
8X12 | 2 | N 106 171 01 | |
| 24 | round hd. screw M6X22
|
M6X22 | 2 | N 910 969 01 | |
| 25 | socket head bolt with inner multipoint head M8X50
|
M8X50 | 6 | N 911 875 01 | |
| 26 | hexagon socket flat head bolt M6X12
|
M6X12 | 2 | N 103 352 06 | |
| 27 | oval hexagon socket head bolt M6X16
|
M6X16 | 15 | N 910 967 02 | |
| 28 | socket head collared bolt with inner multipoint head M10X80
|
M10X80 | 10 | N 911 189 02 | |
| 29 | hexagon collared bolt with multi-point socket head (duo) M6X16,5
|
M6X16,5 | 1 | WHT 001 163 B | |
| 30 | thrust washer 8,2X28X3
|
8,2X28X3 | 1 | WHT 001 396 A | |
| 31 | o-ring 10,3X2,4
|
10,3X2,4 | 1 | WHT 001 905 | |
| 32 | shaft oil seal 32
|
32 | 1 | 06K 103 085 | |
| 33 | tube for oil dipstick | 1 | 06K 115 610 E | ||
| 34 | o-ring 11,8X2,5
|
11,8X2,5 | 1 | WHT 003 463 | |
| 35 | bungs | 1 | 06H 115 418 M | ||
| 39 | socket head bolt with hexagon socket head (combination) M6X16
|
M6X16 | 1 | N 104 514 09 | |
| 44 | spacer plate | 1 | 06L 103 551 D |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy