№ | Name | Ext. inf. | A* | Use of | Part number |
---|---|---|---|---|---|
cylinder head cylinder head cover 2.6/2.8ltr.
6-cylinder:
AAH,ABC |
2.6/2.8ltr. | 6-cylinder: AAH,ABC |
|||
1 | cylinder head also use: N 011 914 2 |
N 011 914 2 |
2 1 |
078 103 351 A | |
- | cylinder head with valves and camshaft |
1 | 078 103 265 X | ||
- | cylinder head with valves and camshaft |
1 | 078 103 266 X | ||
2 | cylinder head gasket | 2 | 078 103 383 E | ||
3 | end cap 24
|
24 | 2 | N 011 914 2 | |
4 | valve guide 36,5MM/8MM
|
36,5MM/8MM | 12 | 056 103 419 A | |
5 | threaded pin M8X30
|
M8X30 | 12 | N 044 411 5 | |
6 | o-ring A10X14
|
A10X14 | 2 | N 013 806 4 | |
6 | o-ring 10X13,5
|
10X13,5 | 2 | N 013 811 5 | |
7 | sealing plug M10X1
|
M10X1 | 1 | N 016 024 1 | |
8 | threaded pin M8X56
|
M8X56 | 16 | 056 103 397 | |
9 | hexagon nut M8
|
M8 | 16 | N 011 008 8 | |
10 | bungs 8,9
|
8,9 | 2 | 035 103 379 | |
11 | spring pin 6,2X22
|
6,2X22 | 4 | 055 105 277 | |
12 | shaft oil seal 47X10
|
47X10 | 3 | 068 103 085 A | |
12 | shaft oil seal 47X10
|
47X10 | 3 | 068 103 085 E | |
13 | cylinder head cover | 1 | 078 103 472 A | ||
14 | cylinder head cover | 1 | 078 103 471 A | ||
15 | seal | 2 | 078 103 483 C | ||
16 | hexagon head bolt M11X1,5X137,5
|
M11X1,5X137,5 | 16 | 078 103 385 A | |
15 | seal | 2 | 078 103 483 L | ||
16 | socket head bolt with inner multipoint head (kombi) M11X1,5X137,5
|
M11X1,5X137,5 | 16 | 078 103 385 J | |
16 | socket head bolt with inner multipoint head (kombi) M11X1,5X137,5
|
M11X1,5X137,5 | 16 | 078 103 385 F | |
17 | socket head bolt with hexagon socket head (combination) M6X25
|
M6X25 | 12 | N 100 801 02 | |
18 | vent trim | 2 | 078 103 547 | ||
19 | pressure relief valve F >> 4C-R-191 125 |
2 |
078 103 363 M | ||
19 | pressure relief valve | 2 | 078 103 363 P | ||
20 | double stud with hexagon drive M6X12/M6X12
|
M6X12/M6X12 | 4 | N 905 295 01 | |
21 | seal | 1 | 06A 103 483 D | ||
21 | seal | 1 | 059 103 487 | ||
22 | end cap | 1 | 06B 103 485 B | ||
22 | end cap | 1 | 026 103 485 A | ||
31 | O-Ring | 1 | 078 145 117 E | ||
32 | bungs | 1 | 078 103 491 A | ||
25 | see illustration: 919-070
|
919-070 | |||
26 | see illustration: 919-070
|
919-070 | |||
29 | see illustration: 905-030
|
905-030 | |||
30 | see illustration: 905-030
|
905-030 | |||
(31) | discont. / replace: 078 103 113 E
|
078 103 113 E | 1 | ||
(32) | end cap | 1 | 078 103 113 E | ||
(32) | end cap | 1 | 078 103 113 B | ||
33 | sleeve | 2 | 078 103 407 | ||
34 | retaining strip | 1 | 078 103 409 | ||
(34) | discont. / replace: 078 103 113 E
|
078 103 113 E | 1 | ||
35 | hexagon head bolt (combi) M6X40
|
M6X40 | 2 | N 090 365 2 | |
35 | hexagon head bolt (combi) M6X40X18-S2
|
M6X40X18-S2 | 2 | N 090 365 1 | |
- | gasket set for cylinder head |
1 | 078 198 012 |