REFRIGERANT LINE ARRANGEMENT

EPC / Smart / Car / FG / FG 451.391 / 83 / 195
‹ ›

№- Name A* Part number
015 O-RING
SUCTION LINE TO SEPARATION POINT 12.93 X 1.78 		002 A 015 997 87 45
065 O-RING
SEPARATION POINT, PRESSURE LINE 10.16 X 1.78 		002 A 015 997 85 45
075 ELASTOMER-MOLDED SEAL
TO INDUCTION LINE 		001 A 000 203 47 80
090 VALVE INSERT
TO INDUCTION LINE 		001 A 450 832 00 85
095 PROTECTIVE CAP
VALVE AT INTAKE PIPE 		001 A 450 832 00 33
100 O-RING
VALVE AT INTAKE PIPE 17,17 X 1,78 		001 A 015 997 89 45
120 BRACKET
FRONT 		001 A 450 832 01 14
135 PRESSURE SENSOR 001 A 211 000 02 83
135 PRESSURE SENSOR
AT PRESSURE LINE M 10

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.
Replaced by: A 211 000 02 83 		001 A 004 542 90 18
135 PRESSURE SENSOR
AT PRESSURE LINE

FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 		001 A 211 000 02 83
145 PROTECTIVE CAP
VALVE AT PRESSURE LINE 		001 A 450 832 01 33
150 O-RING
VALVE AT PRESSURE LINE 		001 A 015 997 88 45
160 NUT
REAR BRACKET M6 		001 N 000000 003477
170 NUT
LINE ATTACHMENT M6 		001 N 000000 003477
185 SEALING RING
AT CONDENSER 7.5X2.0 		001 A 013 997 40 45
185 SEALING RING
EXPANSION VALVE 7.5X2.0 		001 A 013 997 40 45
190 O-RING
TO COMPRESSOR 10 X 2.62 		001 A 015 997 84 45
200 O-RING
TO COMPRESSOR 13.94 X 2.62 		001 A 015 997 86 45
250 REFRIGERANT LINE 001 A 451 832 00 64
255 SEAL RING 003 A 027 997 95 48
270 MOLDED HOSE
SUCTION HOSE TO COMPRESSOR 		001 A 451 832 13 23
280 MOLDED HOSE
PRESSURE LINE TO COMPRESSOR 		001 A 451 832 12 23
290 NUT
M6
Replaced by: N 000000 003477 		001 N 913023 006001
290 NUT
M6 		001 N 000000 003477
300 PRESSURE LINE
CONDENSER CONNECTING POINT 		001 A 451 832 00 22
300 PRESSURE LINE
CONDENSER CONNECTING POINT 		001 A 451 832 00 22
305 PRESSURE SENSOR
M 10 		001 A 004 542 90 18
305 PRESSURE SENSOR
AIR CONDITIONER M 10
001 A 004 542 90 18
305 PRESSURE SENSOR
AIR CONDITIONER
001 A 211 000 02 83
310 O-RING
10,82 X 1,78 		002 A 015 997 88 45
320 VALVE BODY
CAP 		001 A 451 832 02 85
330 VALVE BODY 001 A 451 832 01 85
340 SUCTION LINE
FRONT 		001 A 451 830 06 15
345 O-RING
14 X 1,78 		002 A 022 997 35 45
350 O-RING
17,17 X 1,78 		001 A 015 997 89 45
360 VALVE BODY 001 A 451 832 01 85
370 VALVE INSERT
CAP 		001 A 451 832 00 85
380 BOOT
AT TUNNEL COVERING,FRONT 		001 A 451 838 00 27
420 ELASTOMERIC CUP
AT PRESSURE LINE 		001 A 451 838 02 27
430 ELASTOMERIC CUP
TO INDUCTION LINE 		001 A 451 838 03 27
440 ELASTOMER BEARING
LINE 		002 A 451 504 05 12
450 BRACKET 001 A 000 203 01 37
460 NUT
AT BRACKET M6 		001 N 000000 003477
470 BRACKET 001 A 000 200 04 40
480 TAPPING SCREW
AT BRACKET 4.8X13 		001 N 000000 001527
480 CABLE TIE
4.8X300 MM 		002 A 002 997 24 90
490 BOOT
TUNNEL,REAR 		002 A 451 838 01 27
500 ELASTOMER FITTING
TUNNEL,REAR 		001 A 451 988 01 10
540 FASTENING PLATE
SEPARATION POINT 		001 A 451 830 02 11
550 HEXALOBULAR BOLT
AT PLATE M6X35 		001 N 910143 006005
560 NUT
AT PLATE M6 		001 N 000000 003477
570 O-RING
11,3 X 2,4 		001 A 022 997 33 45
580 O-RING
13,6 X 2,4 		001 A 022 997 34 45
To find out where to buy the item or equivalent, click on the part number.

Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA