| № | Name | A* | Part number |
|---|---|---|---|
| 100 | PROPELLER SHAFT Replaced by: A 973 410 14 02 |
- | A 650 410 07 02 |
| 100 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 590 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 973 410 14 02 |
| 115 | DRIVE FLANGE Replaced by: A 650 411 04 11 |
- | A 650 411 01 11 |
| 115 | DRIVE FLANGE STAGGERED TEETH |
2 | A 650 411 04 11 |
| 118 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 381 410 02 31 |
| 118 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 973 410 00 31 |
| 121 | GREASE NIPPLE | 2 | N 071412 008302 |
| 124 | LOCK AS REQUIRED 1.65 MM |
8 | A 006 994 06 41 |
| 124 | LOCK AS REQUIRED 1.70 MM |
8 | A 006 994 08 41 |
| 124 | LOCK AS REQUIRED 1.80 MM |
8 | A 006 994 12 41 |
| 124 | LOCK AS REQUIRED 1.85 MM |
8 | A 006 994 14 41 |
| 127 | SEAL RING PROTECTIVE TUBE 95X14.5 MM |
1 | A 385 411 00 59 |
| 130 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 130 | GREASE NIPPLE | 1 | N 071412 008102 |
| 139 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
4 | A 360 990 31 01 |
| 200 | PROPELLER SHAFT FROM TRANSFER CASE TO FRONT AXLE 1235 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 674 410 23 02 |
| 215 | DRIVE FLANGE | 2 | A 381 411 08 11 |
| 218 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31 |
- | A 617 410 00 31 |
| 218 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 000 410 40 31 |
| 221 | GREASE NIPPLE | 2 | N 071412 008302 |
| 224 | LOCK RING AS REQUIRED 1.75 MM |
8 | N 000472 042001 |
| 224 | LOCK AS REQUIRED 1.88 MM |
8 | A 005 994 99 41 |
| 224 | LOCK AS REQUIRED 1.93 MM |
8 | A 006 994 01 41 |
| 224 | LOCK AS REQUIRED 2.00 MM |
8 | A 006 994 04 41 |
| 230 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 230 | GREASE NIPPLE | 1 | N 071412 008102 |
| 239 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
8 | A 352 990 04 01 |
| 504 | PROPELLER SHAFT Replaced by: A 654 410 66 02 |
- | A 654 410 07 02 |
| 504 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1189 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 654 410 66 02 |
| 515 | DRIVE FLANGE Replaced by: A 654 411 03 11 |
- | A 654 411 00 11 |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 654 411 03 11 |
| 518 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 16 28 |
- | A 000 410 02 31 |
| 518 | UNIVERSAL JOINT Replaced by: A 942 410 01 31 |
- | A 000 410 16 28 |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 942 410 01 31 |
| 521 | GREASE NIPPLE | 2 | N 071412 008302 |
| 524 | LOCK AS REQUIRED 2.00 MM |
8 | A 006 994 19 41 |
| 524 | LOCK AS REQUIRED 2.10 MM |
8 | A 006 994 23 41 |
| 524 | LOCK AS REQUIRED 2.20 MM |
8 | A 006 994 27 41 |
| 527 | GASKET PROTECTIVE TUBE 98X17 MM |
1 | A 389 411 00 80 |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 530 | GREASE NIPPLE | 1 | N 071412 008102 |
| 539 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
4 | A 360 990 31 01 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy