| № | Name | A* | Part number | A |
|---|---|---|---|---|
| 100 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 713 MM |
1 | A 65 041 063 02 | - |
| 115 | DRIVE FLANGE Replaced by: A 650 411 04 11 |
- | A 65 041 101 11 | - |
| 115 | DRIVE FLANGE STAGGERED TEETH |
2 | A 65 041 104 11 | - |
| 118 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 38 141 002 31 | - |
| 118 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 97 341 000 31 | - |
| 121 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 124 | LOCK AS REQUIRED 1.65 MM |
8 | A 00 699 406 41 | - |
| 124 | LOCK AS REQUIRED 1.70 MM |
8 | A 00 699 408 41 | - |
| 124 | LOCK AS REQUIRED 1.80 MM |
8 | A 00 699 412 41 | - |
| 124 | LOCK AS REQUIRED 1.85 MM |
8 | A 00 699 414 41 | - |
| 127 | SEAL RING PROTECTIVE TUBE 95X14.5 MM |
1 | A 38 541 100 59 | - |
| 130 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - |
| 130 | GREASE NIPPLE | 1 | N 071412 008102 | - |
| 139 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
4 | A 36 099 031 01 | - |
| 200 | PROPELLER SHAFT FROM TRANSFER CASE TO FRONT AXLE 1365 MM |
1 | A 67 441 026 02 | - |
| 215 | DRIVE FLANGE | 2 | A 38 141 108 11 | - |
| 218 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31 |
- | A 61 741 000 31 | - |
| 218 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 00 041 040 31 | - |
| 221 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 224 | LOCK RING AS REQUIRED 1.75 MM |
8 | N 000472 042001 | - |
| 224 | LOCK AS REQUIRED 1.88 MM |
8 | A 00 599 499 41 | - |
| 224 | LOCK AS REQUIRED 1.93 MM |
8 | A 00 699 401 41 | - |
| 224 | LOCK AS REQUIRED 2.00 MM |
8 | A 00 699 404 41 | - |
| 230 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - |
| 230 | GREASE NIPPLE | 1 | N 071412 008102 | - |
| 239 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
8 | A 35 299 004 01 | - |
| 504 | PROPELLER SHAFT Replaced by: A 973 410 78 02 |
- | A 65 041 057 02 | - |
| 504 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1135 MM |
1 | A 97 341 078 02 | - |
| 515 | DRIVE FLANGE Replaced by: A 650 411 04 11 |
- | A 65 041 101 11 | - |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 65 041 104 11 | - |
| 518 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 38 141 002 31 | - |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 97 341 000 31 | - |
| 521 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 524 | LOCK AS REQUIRED 1.65 MM |
8 | A 00 699 406 41 | - |
| 524 | LOCK AS REQUIRED 1.70 MM |
8 | A 00 699 408 41 | - |
| 524 | LOCK AS REQUIRED 1.80 MM |
8 | A 00 699 412 41 | - |
| 524 | LOCK AS REQUIRED 1.85 MM |
8 | A 00 699 414 41 | - |
| 527 | SEAL RING PROTECTIVE TUBE 95X14.5 MM |
1 | A 38 541 100 59 | - |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - |
| 530 | GREASE NIPPLE | 1 | N 071412 008102 | - |
| 539 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
4 | A 36 099 031 01 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy