| № | Name | A* | Part number |
|---|---|---|---|
| 300 | PROPELLER SHAFT Replaced by: A 654 410 37 04 |
- | A 654 410 03 04 |
| 300 | PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING 1460 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 654 410 37 04 |
| 315 | DRIVE FLANGE Replaced by: A 654 411 03 11 |
- | A 654 411 00 11 |
| 315 | DRIVE FLANGE STAGGERED TEETH |
1 | A 654 411 03 11 |
| 318 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 16 28 |
- | A 000 410 02 31 |
| 318 | UNIVERSAL JOINT Replaced by: A 942 410 01 31 |
- | A 000 410 16 28 |
| 318 | UNIVERSAL JOINT CROSS WITH BUSHINGS IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
1 | A 942 410 01 31 |
| 321 | GREASE NIPPLE JOINT CROSS |
1 | N 071412 008302 |
| 324 | LOCK AS REQUIRED 2.00 MM |
4 | A 006 994 19 41 |
| 324 | LOCK AS REQUIRED 2.10 MM |
4 | A 006 994 23 41 |
| 324 | LOCK AS REQUIRED 2.20 MM |
4 | A 006 994 27 41 |
| 336 | PROTECTIVE CAP INTERMEDIATE BEARING, BALL BEARING WITH LOCK |
1 | A 389 413 01 61 |
| 336 | PROTECTIVE CAP INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 389 413 03 61 |
| 339 | SCREW Replaced by: A 360 990 31 01 |
- | A 360 990 29 01 |
| 339 | SCREW PROPELLER SHAFT TO TRANSMISSION COUPLING FLANGE |
4 | A 360 990 31 01 |
| 345 | NUT PROPELLER SHAFT TO TRANSMISSION COUPLING FLANGE |
4 | N 000934 012034 |
| 400 | INTERMEDIATE BEARING INTERMEDIATE BEARING, BALL BEARING WITH LOCK Replaced by: A 389 410 02 22 |
- | A 389 410 01 22 |
| 400 | INTERMEDIATE BEARING Replaced by: A 654 410 00 22 |
- | A 389 410 02 22 |
| 400 | INTERMEDIATE BEARING PROPELLER SHAFT BEARING I INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 654 410 00 22 |
| 403 | BALL BEARING INTERMEDIATE BEARING, BALL BEARING WITH LOCK |
1 | A 002 981 96 25 |
| 403 | BALL BEARING INTERMEDIATE BEARING, BALL BEARING WITH LOCK |
1 | A 002 981 97 25 |
| 406 | SNAP RING INTERMEDIATE BEARING, BALL BEARING WITH LOCK |
2 | N 912009 110200 |
| 409 | PROTECTIVE CAP INTERMEDIATE BEARING, BALL BEARING WITH LOCK |
2 | A 387 413 02 61 |
| SPACER WASHER PROPELLER SHAFT BEARING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
2 | A 654 411 00 52 | |
| 412 | FLANGE PROPELLER SHAFT BEARING I |
1 | A 654 411 00 45 |
| 415 | PROTECTIVE CAP FOLLOWER FLANGE INTERMEDIATE BEARING, BALL BEARING WITH LOCK |
1 | A 389 413 01 61 |
| 415 | PROTECTIVE CAP FOLLOWER FLANGE INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 389 413 03 61 |
| 418 | SCREW FOLLOWER FLANGE TO PROPELLER SHAFT |
1 | A 383 990 00 19 |
| 421 | THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT |
1 | A 389 411 01 62 |
| 424 | BRACKET PROPELLER SHAFT BEARING,LEFT |
1 | A 617 413 28 42 |
| 427 | BRACKET PROPELLER SHAFT BEARING,RIGHT |
1 | A 617 413 27 42 |
| 439 | REINFORCEMENT BRACKET TO PROPELLER SHAFT BEARING |
1 | A 385 413 00 11 |
| 449 | REINFORCEMENT BRACKET TO PROPELLER SHAFT BEARING |
4 | A 385 413 01 11 |
| 500 | PROPELLER SHAFT Replaced by: A 654 410 66 02 |
- | A 654 410 07 02 |
| 500 | PROPELLER SHAFT FROM PROPELLER SHAFT BEARING TO REAR AXLE 1189 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 654 410 66 02 |
| 515 | DRIVE FLANGE Replaced by: A 654 411 03 11 |
- | A 654 411 00 11 |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 654 411 03 11 |
| 518 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 16 28 |
- | A 000 410 02 31 |
| 518 | UNIVERSAL JOINT Replaced by: A 942 410 01 31 |
- | A 000 410 16 28 |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
2 | A 942 410 01 31 |
| 521 | GREASE NIPPLE JOINT CROSS |
2 | N 071412 008302 |
| 524 | LOCK AS REQUIRED 2.00 MM |
8 | A 006 994 19 41 |
| 524 | LOCK AS REQUIRED 2.10 MM |
8 | A 006 994 23 41 |
| 524 | LOCK AS REQUIRED 2.20 MM |
8 | A 006 994 27 41 |
| 527 | GASKET PROTECTIVE TUBE 98X17 MM |
1 | A 389 411 00 80 |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 530 | GREASE NIPPLE PROTECTIVE TUBE |
1 | N 071412 008102 |
| 539 | SCREW Replaced by: A 360 990 31 01 |
- | A 360 990 29 01 |
| 539 | SCREW PROPELLER SHAFT TO INTERMEDIATE BEARING AND TO REAR AXLE |
8 | A 360 990 31 01 |
| 545 | NUT PROPELLER SHAFT TO INTERMEDIATE BEARING AND TO REAR AXLE |
8 | N 000934 012034 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy