| № | Name | A* | Part number | A |
|---|---|---|---|---|
| 300 | PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING I 1725 MM |
1 | A 65 041 021 04 | - |
| 304 | PROPELLER SHAFT Replaced by: A 973 410 01 04 |
- | A 65 041 020 04 | - |
| 304 | PROPELLER SHAFT FROM PROPELLER SHAFT BEARING I TO PROPELLER SHAFT BEARING II 1145 MM |
1 | A 97 341 001 04 | - |
| 315 | DRIVE FLANGE Replaced by: A 650 411 04 11 |
- | A 65 041 101 11 | - |
| 315 | DRIVE FLANGE STAGGERED TEETH |
2 | A 65 041 104 11 | - |
| 318 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 38 141 002 31 | - |
| 318 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 97 341 000 31 | - |
| 321 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 324 | LOCK AS REQUIRED 1.65 MM |
8 | A 00 699 406 41 | - |
| 324 | LOCK AS REQUIRED 1.70 MM |
8 | A 00 699 408 41 | - |
| 324 | LOCK AS REQUIRED 1.80 MM |
8 | A 00 699 412 41 | - |
| 324 | LOCK AS REQUIRED 1.85 MM |
8 | A 00 699 414 41 | - |
| 336 | PROTECTIVE CAP | 2 | A 38 541 304 61 | - |
| 339 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
8 | A 36 099 031 01 | - |
| 345 | NUT PROPELLER SHAFT TO COUPLING FLANGE |
8 | N 000934 012034 | - |
| 400 | INTERMEDIATE BEARING Replaced by: A 973 410 00 22 |
- | A 38 541 017 22 | - |
| 400 | INTERMEDIATE BEARING PROPELLER SHAFT BEARING |
2 | A 97 341 000 22 | - |
| SPACER WASHER PROPELLER SHAFT BEARING |
4 | A 97 341 100 52 | - | |
| 412 | FLANGE PROPELLER SHAFT BEARING |
2 | A 65 041 100 46 | - |
| 415 | PROTECTIVE CAP FOLLOWER FLANGE |
2 | A 38 541 304 61 | - |
| 418 | SCREW FOLLOWER FLANGE TO PROPELLER SHAFT |
2 | A 38 399 000 19 | - |
| 421 | THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT |
2 | A 38 941 101 62 | - |
| 424 | BRACKET PROPELLER SHAFT BEARING I,LEFT |
1 | A 38 341 301 42 | - |
| 424 | BRACKET PROPELLER SHAFT BEARING II,LEFT |
1 | A 38 541 377 42 | - |
| 427 | BRACKET PROPELLER SHAFT BEARING I,RIGHT |
1 | A 38 341 300 42 | - |
| 427 | BRACKET PROPELLER SHAFT BEARING II,RIGHT |
1 | A 38 541 376 42 | - |
| 438 | REINFORCEMENT PROPELLER SHAFT BEARING |
1 | A 38 541 300 11 | - |
| 439 | REINFORCEMENT PROPELLER SHAFT BEARING |
1 | A 38 741 301 11 | - |
| 449 | REINFORCEMENT BRACKET TO CROSS MEMBER |
4 | A 38 541 301 11 | - |
| 500 | PROPELLER SHAFT Replaced by: A 973 410 35 02 |
- | A 65 041 003 02 | - |
| 500 | PROPELLER SHAFT FROM PROPELLER SHAFT BEARING II TO REAR AXLE 1825 MM |
1 | A 97 341 035 02 | - |
| 515 | DRIVE FLANGE Replaced by: A 650 411 04 11 |
- | A 65 041 101 11 | - |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 65 041 104 11 | - |
| 518 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 38 141 002 31 | - |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
2 | A 97 341 000 31 | - |
| 521 | GREASE NIPPLE | 2 | N 071412 008302 | - |
| 524 | LOCK AS REQUIRED 1.65 MM |
8 | A 00 699 406 41 | - |
| 524 | LOCK AS REQUIRED 1.70 MM |
8 | A 00 699 408 41 | - |
| 524 | LOCK AS REQUIRED 1.80 MM |
8 | A 00 699 412 41 | - |
| 524 | LOCK AS REQUIRED 1.85 MM |
8 | A 00 699 414 41 | - |
| 527 | SEAL RING PROTECTIVE TUBE 95X14.5 MM |
1 | A 38 541 100 59 | - |
| 530 | GREASE NIPPLE | 1 | N 071412 008100 | - |
| 539 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
8 | A 36 099 031 01 | - |
| 545 | NUT PROPELLER SHAFT TO COUPLING FLANGE |
8 | N 000934 012034 | - |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy