| № | Name | A* | Part number |
|---|---|---|---|
| 300 | PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING I 1717 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 650 410 21 04 |
| 315 | DRIVE FLANGE Replaced by: A 650 411 04 11 |
- | A 650 411 01 11 |
| 315 | DRIVE FLANGE STAGGERED TEETH |
1 | A 650 411 04 11 |
| 318 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 381 410 02 31 |
| 318 | UNIVERSAL JOINT CROSS WITH BUSHINGS IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
1 | A 973 410 00 31 |
| 321 | GREASE NIPPLE | 1 | N 071412 008302 |
| 324 | LOCK AS REQUIRED 1.65 MM |
4 | A 006 994 06 41 |
| 324 | LOCK AS REQUIRED 1.70 MM |
4 | A 006 994 08 41 |
| 324 | LOCK AS REQUIRED 1.80 MM |
4 | A 006 994 12 41 |
| 324 | LOCK AS REQUIRED 1.85 MM |
4 | A 006 994 14 41 |
| 336 | PROTECTIVE CAP INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 385 413 04 61 |
| 339 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
4 | A 360 990 31 01 |
| 342 | LOCK WASHER PROPELLER SHAFT TO COUPLING FLANGE |
4 | N 912004 012100 |
| 345 | NUT PROPELLER SHAFT TO COUPLING FLANGE |
4 | N 000934 012034 |
| 400 | INTERMEDIATE BEARING Replaced by: A 973 410 00 22 |
- | A 385 410 17 22 |
| 400 | INTERMEDIATE BEARING PROPELLER SHAFT BEARING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 973 410 00 22 |
| SPACER WASHER PROPELLER SHAFT BEARING INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
2 | A 973 411 00 52 | |
| 412 | FLANGE PROPELLER SHAFT BEARING |
1 | A 650 411 00 46 |
| 415 | PROTECTIVE CAP FOLLOWER FLANGE INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT |
1 | A 385 413 04 61 |
| 418 | SCREW FOLLOWER FLANGE TO PROPELLER SHAFT |
1 | A 383 990 00 19 |
| 421 | THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT |
1 | A 389 411 01 62 |
| 424 | BRACKET PROPELLER SHAFT BEARING I,LEFT |
1 | A 385 413 11 42 |
| 427 | BRACKET PROPELLER SHAFT BEARING I,RIGHT |
1 | A 385 413 10 42 |
| 438 | REINFORCEMENT PROPELLER SHAFT BEARING |
1 | A 385 413 00 11 |
| 449 | REINFORCEMENT BRACKET TO CROSS MEMBER |
4 | A 385 413 01 11 |
| 500 | PROPELLER SHAFT Replaced by: A 973 410 29 02 |
- | A 650 410 10 02 |
| 500 | PROPELLER SHAFT FROM PROPELLER SHAFT BEARING TO REAR AXLE I 1550 MM PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
1 | A 973 410 29 02 |
| 515 | DRIVE FLANGE Replaced by: A 650 411 04 11 |
- | A 650 411 01 11 |
| 515 | DRIVE FLANGE STAGGERED TEETH |
2 | A 650 411 04 11 |
| 518 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 381 410 02 31 |
| 518 | UNIVERSAL JOINT CROSS WITH BUSHINGS IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
2 | A 973 410 00 31 |
| 521 | GREASE NIPPLE | 2 | N 071412 008302 |
| 524 | LOCK AS REQUIRED 1.65 MM |
8 | A 006 994 06 41 |
| 524 | LOCK AS REQUIRED 1.70 MM |
8 | A 006 994 08 41 |
| 524 | LOCK AS REQUIRED 1.80 MM |
8 | A 006 994 12 41 |
| 524 | LOCK AS REQUIRED 1.85 MM |
8 | A 006 994 14 41 |
| 527 | SEAL RING PROTECTIVE TUBE 95X14.5 MM |
1 | A 385 411 00 59 |
| 530 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 |
| 530 | GREASE NIPPLE | 1 | N 071412 008102 |
| 539 | SCREW PROPELLER SHAFT TO COUPLING FLANGE |
8 | A 360 990 31 01 |
| 542 | LOCK WASHER PROPELLER SHAFT TO COUPLING FLANGE |
8 | N 912004 012100 |
| 545 | NUT PROPELLER SHAFT TO COUPLING FLANGE |
8 | N 000934 012034 |
Copyright © 2024 WebAutoCats.com. All rights reserved. Terms of Use | Privacy Policy